From: Matthias Fuchs Date: Tue, 21 Sep 2010 07:38:04 +0000 (+0200) Subject: ppx4xx: remove unused functionality for DU405 boards X-Git-Tag: v2010.12-rc1~174^2~13 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=5b9144638e7d4c86e0470e21869b341278e183c3;p=u-boot ppx4xx: remove unused functionality for DU405 boards Remove some unused functionality to make U-Boot build again. Especially PCI is not used on the board. Signed-off-by: Matthias Fuchs Signed-off-by: Stefan Roese --- diff --git a/include/configs/DU405.h b/include/configs/DU405.h index 0907c3ab06..6ba9f13bf1 100644 --- a/include/configs/DU405.h +++ b/include/configs/DU405.h @@ -73,6 +73,11 @@ #include #undef CONFIG_CMD_NFS +#undef CONFIG_CMD_EDITENV +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_CONSOLE +#undef CONFIG_CMD_LOADB +#undef CONFIG_CMD_LOADS #define CONFIG_CMD_IDE #define CONFIG_CMD_ELF #define CONFIG_CMD_MII @@ -131,32 +136,6 @@ #define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ -/*----------------------------------------------------------------------- - * PCI stuff - *----------------------------------------------------------------------- - */ -#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ - -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ - -#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ - -#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0404 /* PCI Device ID: CPCI-ISER4 */ -#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS 0xff000001 /* 16MB, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#define CONFIG_SYS_PCI_PTM2LA 0xffe00000 /* point to flash */ -#define CONFIG_SYS_PCI_PTM2MS 0xffe00001 /* 2MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ - /*----------------------------------------------------------------------- * IDE/ATA stuff *-----------------------------------------------------------------------