From: Kim Phillips Date: Fri, 28 May 2010 08:00:14 +0000 (+0000) Subject: fdt: move fsl specific code from common fdt area to mpc8xxx/fdt.c X-Git-Tag: v2010.09-rc1~80^2~24 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=5d0c3b57b2c6dc58c4626b036b1cc767619b19f4;p=u-boot fdt: move fsl specific code from common fdt area to mpc8xxx/fdt.c Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- diff --git a/Makefile b/Makefile index 9c4e3a4480..cd83ba76fb 100644 --- a/Makefile +++ b/Makefile @@ -221,6 +221,7 @@ LIBS += drivers/power/libpower.a LIBS += drivers/spi/libspi.a ifeq ($(CPU),mpc83xx) LIBS += drivers/qe/qe.a +LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a endif ifeq ($(CPU),mpc85xx) LIBS += drivers/qe/qe.a diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile index 481f9e541d..67bb5cfe09 100644 --- a/arch/powerpc/cpu/mpc8xxx/Makefile +++ b/arch/powerpc/cpu/mpc8xxx/Makefile @@ -1,5 +1,5 @@ # -# Copyright 2009 Freescale Semiconductor, Inc. +# Copyright 2009-2010 Freescale Semiconductor, Inc. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License @@ -10,9 +10,12 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib8xxx.a +ifneq ($(CPU),mpc83xx) COBJS-y += cpu.o -COBJS-$(CONFIG_OF_LIBFDT) += fdt.o COBJS-$(CONFIG_PCI) += pci_cfg.o +endif + +COBJS-$(CONFIG_OF_LIBFDT) += fdt.o SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index ccefaf5716..79d3cdfa64 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2009 Freescale Semiconductor, Inc. + * Copyright 2009-2010 Freescale Semiconductor, Inc. * * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains @@ -27,6 +27,7 @@ #include #include +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) void ft_fixup_num_cores(void *blob) { int off, num_cores, del_cores; @@ -53,3 +54,133 @@ void ft_fixup_num_cores(void *blob) { debug ("deleted %d extra core entry entries from device tree\n", del_cores); } +#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */ + +#ifdef CONFIG_HAS_FSL_DR_USB +void fdt_fixup_dr_usb(void *blob, bd_t *bd) +{ + char *mode; + char *type; + const char *compat = "fsl-usb2-dr"; + const char *prop_mode = "dr_mode"; + const char *prop_type = "phy_type"; + int node_offset; + int err; + + mode = getenv("usb_dr_mode"); + type = getenv("usb_phy_type"); + if (!mode && !type) + return; + + node_offset = fdt_node_offset_by_compatible(blob, 0, compat); + if (node_offset < 0) { + printf("WARNING: could not find compatible node %s: %s.\n", + compat, fdt_strerror(node_offset)); + return; + } + + if (mode) { + err = fdt_setprop(blob, node_offset, prop_mode, mode, + strlen(mode) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_mode, compat, fdt_strerror(err)); + } + + if (type) { + err = fdt_setprop(blob, node_offset, prop_type, type, + strlen(type) + 1); + if (err < 0) + printf("WARNING: could not set %s for %s: %s.\n", + prop_type, compat, fdt_strerror(err)); + } +} +#endif /* CONFIG_HAS_FSL_DR_USB */ + +#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) +/* + * update crypto node properties to a specified revision of the SEC + * called with sec_rev == 0 if not on an mpc8xxxE processor + */ +void fdt_fixup_crypto_node(void *blob, int sec_rev) +{ + const struct sec_rev_prop { + u32 sec_rev; + u32 num_channels; + u32 channel_fifo_len; + u32 exec_units_mask; + u32 descriptor_types_mask; + } sec_rev_prop_list [] = { + { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ + { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ + { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ + { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ + { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ + { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ + { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ + }; + char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * + sizeof("fsl,secX.Y")]; + int crypto_node, sec_idx, err; + char *p; + u32 val; + + /* locate crypto node based on lowest common compatible */ + crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); + if (crypto_node == -FDT_ERR_NOTFOUND) + return; + + /* delete it if not on an E-processor */ + if (crypto_node > 0 && !sec_rev) { + fdt_del_node(blob, crypto_node); + return; + } + + /* else we got called for possible uprev */ + for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) + if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) + break; + + if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { + puts("warning: unknown SEC revision number\n"); + return; + } + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); + err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); + err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); + err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); + err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = 0; + while (sec_idx >= 0) { + p = compat_strlist + val; + val += sprintf(p, "fsl,sec%d.%d", + (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, + sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; + sec_idx--; + } + err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); +} +#endif /* defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) */ diff --git a/common/fdt_support.c b/common/fdt_support.c index a8ac617da5..4d87135cb7 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -474,135 +474,6 @@ void fdt_fixup_ethernet(void *fdt) } } -#ifdef CONFIG_HAS_FSL_DR_USB -void fdt_fixup_dr_usb(void *blob, bd_t *bd) -{ - char *mode; - char *type; - const char *compat = "fsl-usb2-dr"; - const char *prop_mode = "dr_mode"; - const char *prop_type = "phy_type"; - int node_offset; - int err; - - mode = getenv("usb_dr_mode"); - type = getenv("usb_phy_type"); - if (!mode && !type) - return; - - node_offset = fdt_node_offset_by_compatible(blob, 0, compat); - if (node_offset < 0) { - printf("WARNING: could not find compatible node %s: %s.\n", - compat, fdt_strerror(node_offset)); - return; - } - - if (mode) { - err = fdt_setprop(blob, node_offset, prop_mode, mode, - strlen(mode) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_mode, compat, fdt_strerror(err)); - } - - if (type) { - err = fdt_setprop(blob, node_offset, prop_type, type, - strlen(type) + 1); - if (err < 0) - printf("WARNING: could not set %s for %s: %s.\n", - prop_type, compat, fdt_strerror(err)); - } -} -#endif /* CONFIG_HAS_FSL_DR_USB */ - -#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) -/* - * update crypto node properties to a specified revision of the SEC - * called with sec_rev == 0 if not on an mpc8xxxE processor - */ -void fdt_fixup_crypto_node(void *blob, int sec_rev) -{ - const struct sec_rev_prop { - u32 sec_rev; - u32 num_channels; - u32 channel_fifo_len; - u32 exec_units_mask; - u32 descriptor_types_mask; - } sec_rev_prop_list [] = { - { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ - { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ - { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ - { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ - { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ - { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ - { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ - }; - char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * - sizeof("fsl,secX.Y")]; - int crypto_node, sec_idx, err; - char *p; - u32 val; - - /* locate crypto node based on lowest common compatible */ - crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); - if (crypto_node == -FDT_ERR_NOTFOUND) - return; - - /* delete it if not on an E-processor */ - if (crypto_node > 0 && !sec_rev) { - fdt_del_node(blob, crypto_node); - return; - } - - /* else we got called for possible uprev */ - for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) - if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) - break; - - if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { - puts("warning: unknown SEC revision number\n"); - return; - } - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); - err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); - err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); - err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); - err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); - - val = 0; - while (sec_idx >= 0) { - p = compat_strlist + val; - val += sprintf(p, "fsl,sec%d.%d", - (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, - sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; - sec_idx--; - } - err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); - if (err < 0) - printf("WARNING: could not set crypto property: %s\n", - fdt_strerror(err)); -} -#endif /* defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) */ - /* Resize the fdt to its actual size + a bit of padding */ int fdt_resize(void *blob) {