From: Peng Fan Date: Tue, 2 Jan 2018 01:32:08 +0000 (+0800) Subject: imx: mx6sxsabresd: Enable DM driver X-Git-Tag: v2018.03-rc1~176^2~43 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=5dfc9d3766ee74f3711747a5fc9fa763ae82747c;p=u-boot imx: mx6sxsabresd: Enable DM driver Enable I2C/MMC/GPIO/REGUALTOR/PMIC/USB DM drivers. There are some dependency, such as when DM MMC enabled, USB compile error. Also the i.MX I2C MMC DM driver does not support legacy GPIO interface. So enable them all together. Signed-off-by: Peng Fan Cc: Stefano Babic Cc: Fabio Estevam --- diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 3ad2140314..8940f37208 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -26,8 +26,6 @@ #include #include #include "../common/pfuze.h" -#include -#include DECLARE_GLOBAL_DATA_PTR; @@ -39,11 +37,6 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \ PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS) -#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE) - #define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ PAD_CTL_SPEED_HIGH | \ PAD_CTL_DSE_48ohm | PAD_CTL_SRE_FAST) @@ -54,11 +47,6 @@ DECLARE_GLOBAL_DATA_PTR; #define ENET_RX_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_SPEED_HIGH | PAD_CTL_SRE_FAST) -#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ - PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ - PAD_CTL_ODE) - #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_PUE | \ PAD_CTL_PKE | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm) @@ -74,44 +62,6 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_GPIO1_IO05__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL), }; -static iomux_v3_cfg_t const usdhc2_pads[] = { - MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc3_pads[] = { - MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA4__USDHC3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA5__USDHC3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA6__USDHC3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD3_DATA7__USDHC3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - - /* CD pin */ - MX6_PAD_KEY_COL0__GPIO2_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL), - - /* RST_B, used for power reset cycle */ - MX6_PAD_KEY_COL1__GPIO2_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usdhc4_pads[] = { - MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), - MX6_PAD_SD4_DATA7__GPIO6_IO_21 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - static iomux_v3_cfg_t const fec1_pads[] = { MX6_PAD_ENET1_MDC__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_ENET1_MDIO__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -166,9 +116,11 @@ static int setup_fec(void) ARRAY_SIZE(phy_control_pads)); /* Enable the ENET power, active low */ + gpio_request(IMX_GPIO_NR(2, 6), "enet_rst"); gpio_direction_output(IMX_GPIO_NR(2, 6) , 0); /* Reset AR8031 PHY */ + gpio_request(IMX_GPIO_NR(2, 7), "phy_rst"); gpio_direction_output(IMX_GPIO_NR(2, 7) , 0); mdelay(10); gpio_set_value(IMX_GPIO_NR(2, 7), 1); @@ -188,86 +140,28 @@ int board_eth_init(bd_t *bis) return cpu_eth_init(bis); } -#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) -/* I2C1 for PMIC */ -static struct i2c_pads_info i2c_pad_info1 = { - .scl = { - .i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC, - .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC, - .gp = IMX_GPIO_NR(1, 0), - }, - .sda = { - .i2c_mode = MX6_PAD_GPIO1_IO01__I2C1_SDA | PC, - .gpio_mode = MX6_PAD_GPIO1_IO01__GPIO1_IO_1 | PC, - .gp = IMX_GPIO_NR(1, 1), - }, -}; - int power_init_board(void) { - struct pmic *p; + struct udevice *dev; unsigned int reg; int ret; - p = pfuze_common_init(I2C_PMIC); - if (!p) + dev = pfuze_common_init(); + if (!dev) return -ENODEV; - ret = pfuze_mode_init(p, APS_PFM); + ret = pfuze_mode_init(dev, APS_PFM); if (ret < 0) return ret; /* Enable power of VGEN5 3V3, needed for SD3 */ - pmic_reg_read(p, PFUZE100_VGEN5VOL, ®); + reg = pmic_reg_read(dev, PFUZE100_VGEN5VOL); reg &= ~LDO_VOL_MASK; reg |= (LDOB_3_30V | (1 << LDO_EN)); - pmic_reg_write(p, PFUZE100_VGEN5VOL, reg); - - return 0; -} - -#ifdef CONFIG_USB_EHCI_MX6 -#define USB_OTHERREGS_OFFSET 0x800 -#define UCTRL_PWR_POL (1 << 9) - -static iomux_v3_cfg_t const usb_otg_pads[] = { - /* OGT1 */ - MX6_PAD_GPIO1_IO09__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), - MX6_PAD_GPIO1_IO10__ANATOP_OTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL), - /* OTG2 */ - MX6_PAD_GPIO1_IO12__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL) -}; - -static void setup_usb(void) -{ - imx_iomux_v3_setup_multiple_pads(usb_otg_pads, - ARRAY_SIZE(usb_otg_pads)); -} - -int board_usb_phy_mode(int port) -{ - if (port == 1) - return USB_INIT_HOST; - else - return usb_phy_mode(port); -} - -int board_ehci_hcd_init(int port) -{ - u32 *usbnc_usb_ctrl; - - if (port > 1) - return -EINVAL; - - usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET + - port * 4); - - /* Set Power polarity */ - setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL); + pmic_reg_write(dev, PFUZE100_VGEN5VOL, reg); return 0; } -#endif int board_phy_config(struct phy_device *phydev) { @@ -296,138 +190,12 @@ int board_early_init_f(void) imx_iomux_v3_setup_multiple_pads(peri_3v3_pads, ARRAY_SIZE(peri_3v3_pads)); - /* Active high for ncp692 */ - gpio_direction_output(IMX_GPIO_NR(4, 16) , 1); - -#ifdef CONFIG_USB_EHCI_MX6 - setup_usb(); -#endif - return 0; } -static struct fsl_esdhc_cfg usdhc_cfg[3] = { - {USDHC2_BASE_ADDR, 0, 4}, - {USDHC3_BASE_ADDR}, - {USDHC4_BASE_ADDR}, -}; - -#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 10) -#define USDHC3_PWR_GPIO IMX_GPIO_NR(2, 11) -#define USDHC4_CD_GPIO IMX_GPIO_NR(6, 21) - int board_mmc_get_env_dev(int devno) { - return devno - 1; -} - -int board_mmc_getcd(struct mmc *mmc) -{ - struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret = 0; - - switch (cfg->esdhc_base) { - case USDHC2_BASE_ADDR: - ret = 1; /* Assume uSDHC2 is always present */ - break; - case USDHC3_BASE_ADDR: - ret = !gpio_get_value(USDHC3_CD_GPIO); - break; - case USDHC4_BASE_ADDR: - ret = !gpio_get_value(USDHC4_CD_GPIO); - break; - } - - return ret; -} - -int board_mmc_init(bd_t *bis) -{ -#ifndef CONFIG_SPL_BUILD - int i, ret; - - /* - * According to the board_mmc_init() the following map is done: - * (U-Boot device node) (Physical Port) - * mmc0 USDHC2 - * mmc1 USDHC3 - * mmc2 USDHC4 - */ - for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { - switch (i) { - case 0: - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - break; - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - gpio_direction_input(USDHC3_CD_GPIO); - gpio_direction_output(USDHC3_PWR_GPIO, 1); - usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - break; - case 2: - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); - gpio_direction_input(USDHC4_CD_GPIO); - usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - break; - default: - printf("Warning: you configured more USDHC controllers" - "(%d) than supported by the board\n", i + 1); - return -EINVAL; - } - - ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); - if (ret) { - printf("Warning: failed to initialize mmc dev %d\n", i); - return ret; - } - } - - return 0; -#else - struct src *src_regs = (struct src *)SRC_BASE_ADDR; - u32 val; - u32 port; - - val = readl(&src_regs->sbmr1); - - if ((val & 0xc0) != 0x40) { - printf("Not boot from USDHC!\n"); - return -EINVAL; - } - - port = (val >> 11) & 0x3; - printf("port %d\n", port); - switch (port) { - case 1: - imx_iomux_v3_setup_multiple_pads( - usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); - usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; - break; - case 2: - imx_iomux_v3_setup_multiple_pads( - usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); - gpio_direction_input(USDHC3_CD_GPIO); - gpio_direction_output(USDHC3_PWR_GPIO, 1); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); - usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; - break; - case 3: - imx_iomux_v3_setup_multiple_pads( - usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); - gpio_direction_input(USDHC4_CD_GPIO); - usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); - usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR; - break; - } - - gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; - return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); -#endif + return devno; } #ifdef CONFIG_FSL_QSPI @@ -509,11 +277,13 @@ static int setup_lcd(void) imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); /* Reset the LCD */ + gpio_request(IMX_GPIO_NR(3, 27), "lcd_rst"); gpio_direction_output(IMX_GPIO_NR(3, 27) , 0); udelay(500); gpio_direction_output(IMX_GPIO_NR(3, 27) , 1); /* Set Brightness to high */ + gpio_request(IMX_GPIO_NR(6, 4), "lcd_bright"); gpio_direction_output(IMX_GPIO_NR(6, 4) , 1); return 0; @@ -525,9 +295,9 @@ int board_init(void) /* Address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; -#ifdef CONFIG_SYS_I2C_MXC - setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); -#endif + /* Active high for ncp692 */ + gpio_request(IMX_GPIO_NR(4, 16), "ncp692_en"); + gpio_direction_output(IMX_GPIO_NR(4, 16), 1); #ifdef CONFIG_FSL_QSPI board_qspi_init(); @@ -566,6 +336,117 @@ int checkboard(void) #include #include +static struct fsl_esdhc_cfg usdhc_cfg[3] = { + {USDHC2_BASE_ADDR, 0, 4}, + {USDHC3_BASE_ADDR}, + {USDHC4_BASE_ADDR}, +}; + +#define USDHC3_CD_GPIO IMX_GPIO_NR(2, 10) +#define USDHC3_PWR_GPIO IMX_GPIO_NR(2, 11) +#define USDHC4_CD_GPIO IMX_GPIO_NR(6, 21) + +static iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA4__USDHC3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA5__USDHC3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA6__USDHC3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DATA7__USDHC3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + + /* CD pin */ + MX6_PAD_KEY_COL0__GPIO2_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL), + + /* RST_B, used for power reset cycle */ + MX6_PAD_KEY_COL1__GPIO2_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc4_pads[] = { + MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DATA7__GPIO6_IO_21 | MUX_PAD_CTRL(NO_PAD_CTRL), +}; + +int board_mmc_init(bd_t *bis) +{ + struct src *src_regs = (struct src *)SRC_BASE_ADDR; + u32 val; + u32 port; + + val = readl(&src_regs->sbmr1); + + if ((val & 0xc0) != 0x40) { + printf("Not boot from USDHC!\n"); + return -EINVAL; + } + + port = (val >> 11) & 0x3; + printf("port %d\n", port); + switch (port) { + case 1: + imx_iomux_v3_setup_multiple_pads( + usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK); + usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR; + break; + case 2: + imx_iomux_v3_setup_multiple_pads( + usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + gpio_direction_input(USDHC3_CD_GPIO); + gpio_direction_output(USDHC3_PWR_GPIO, 1); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR; + break; + case 3: + imx_iomux_v3_setup_multiple_pads( + usdhc4_pads, ARRAY_SIZE(usdhc4_pads)); + gpio_direction_input(USDHC4_CD_GPIO); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR; + break; + } + + gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk; + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} + +int board_mmc_getcd(struct mmc *mmc) +{ + struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + int ret = 0; + + switch (cfg->esdhc_base) { + case USDHC2_BASE_ADDR: + ret = 1; /* Assume uSDHC2 is always present */ + break; + case USDHC3_BASE_ADDR: + ret = !gpio_get_value(USDHC3_CD_GPIO); + break; + case USDHC4_BASE_ADDR: + ret = !gpio_get_value(USDHC4_CD_GPIO); + break; + } + + return ret; +} + const struct mx6sx_iomux_ddr_regs mx6_ddr_ioregs = { .dram_dqm0 = 0x00000028, .dram_dqm1 = 0x00000028, diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index 9ac5236df0..9a27710a89 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -29,11 +29,23 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_DM_MMC=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_BAR=y CONFIG_PHYLIB=y CONFIG_PCI=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y diff --git a/configs/mx6sxsabresd_spl_defconfig b/configs/mx6sxsabresd_spl_defconfig index 6a1423bd0c..033fc6cf58 100644 --- a/configs/mx6sxsabresd_spl_defconfig +++ b/configs/mx6sxsabresd_spl_defconfig @@ -38,10 +38,22 @@ CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_FAT=y CONFIG_CMD_FS_GENERIC=y CONFIG_OF_CONTROL=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_DM_MMC=y CONFIG_SPI_FLASH=y CONFIG_PHYLIB=y CONFIG_PCI=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_STORAGE=y CONFIG_USB_HOST_ETHER=y CONFIG_USB_ETHER_ASIX=y diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h index 906e677cd1..b20e436f93 100644 --- a/include/configs/mx6sxsabresd.h +++ b/include/configs/mx6sxsabresd.h @@ -145,19 +145,12 @@ #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR /* I2C Configs */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 -/* PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE100 -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 - /* Network */ #define CONFIG_FEC_MXC #define CONFIG_MII