From: Peter Tyser Date: Fri, 22 Oct 2010 05:20:30 +0000 (-0500) Subject: post/i2c: Rename I2C_ADDR_LIST to CONFIG_SYS_POST_I2C_ADDRS X-Git-Tag: v2010.12-rc1~34^2~4 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=60aaaa0782848062d0f499382035acc09eaff352;p=u-boot post/i2c: Rename I2C_ADDR_LIST to CONFIG_SYS_POST_I2C_ADDRS Signed-off-by: Peter Tyser Acked-by: Heiko Schocher Acked-by: Wolfgang Denk Signed-off-by: Kumar Gala --- diff --git a/doc/README.POST b/doc/README.POST index eeb218d39c..695497e4be 100644 --- a/doc/README.POST +++ b/doc/README.POST @@ -659,12 +659,11 @@ not need any modifications for porting them to another board/CPU. 2.2.2.1. I2C test For verifying the I2C bus, a full I2C bus scanning will be performed -using the i2c_probe() routine. If any I2C device is found, the test -will be considered as passed, otherwise failed. This particular way -will be used because it provides the most common method of testing. -For example, using the internal loopback mode of the CPM I2C -controller for testing would not work on boards where the software -I2C driver (also known as bit-banged driver) is used. +using the i2c_probe() routine. If a board defines +CONFIG_SYS_POST_I2C_ADDRS the I2C test will pass if all devices +listed in CONFIG_SYS_POST_I2C_ADDRS are found, and no additional +devices are detected. If CONFIG_SYS_POST_I2C_ADDRS is not defined +the test will pass if any I2C device is found. 2.2.2.2. Watchdog timer test diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h index 9702d63eb8..c8e0ff287b 100644 --- a/include/configs/KUP4K.h +++ b/include/configs/KUP4K.h @@ -139,9 +139,9 @@ /* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + } #define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h index 9613ed9a82..ce731e387d 100644 --- a/include/configs/KUP4X.h +++ b/include/configs/KUP4X.h @@ -149,9 +149,9 @@ /* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST {CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + } #define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index ad86e2e23a..f336e8d0bc 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -251,10 +251,10 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 /* List of I2C addresses to be verified by POST */ -#undef I2C_ADDR_LIST -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_SLAVE } +#undef CONFIG_SYS_POST_I2C_ADDRS +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_SLAVE} /* * Flash configuration diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 2612c7a50b..794e11b024 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -370,10 +370,10 @@ /* List of I2C addresses to be verified by POST */ #if defined (CONFIG_MINIFAP) -#undef I2C_ADDR_LIST -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_HWMON_ADDR, \ - CONFIG_SYS_I2C_SLAVE } +#undef CONFIG_SYS_POST_I2C_ADDRS +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_HWMON_ADDR, \ + CONFIG_SYS_I2C_SLAVE} #endif /* diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h index 1b129a2e66..af6769b18d 100644 --- a/include/configs/cm5200.h +++ b/include/configs/cm5200.h @@ -80,7 +80,9 @@ #define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C) #define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) /* List of I2C addresses to be verified by POST */ -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_SLAVE, CONFIG_SYS_I2C_IO, CONFIG_SYS_I2C_EEPROM } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_SLAVE, \ + CONFIG_SYS_I2C_IO, \ + CONFIG_SYS_I2C_EEPROM} /* display image timestamps */ #define CONFIG_TIMESTAMP 1 diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index 1062765f03..9e48857308 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -349,32 +349,32 @@ /* List of I2C addresses to be verified by POST */ #ifdef CONFIG_USE_FRAM -#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ - CONFIG_SYS_I2C_SYSMON_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_POWER_A_ADDR, \ - CONFIG_SYS_I2C_POWER_B_ADDR, \ - CONFIG_SYS_I2C_KEYBD_ADDR, \ - CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ + CONFIG_SYS_I2C_SYSMON_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_POWER_A_ADDR, \ + CONFIG_SYS_I2C_POWER_B_ADDR, \ + CONFIG_SYS_I2C_KEYBD_ADDR, \ + CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR, \ + } #else /* Use EEPROM - which show up on 8 consequtive addresses */ -#define I2C_ADDR_LIST { /* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ - CONFIG_SYS_I2C_SYSMON_ADDR, \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_POWER_A_ADDR, \ - CONFIG_SYS_I2C_POWER_B_ADDR, \ - CONFIG_SYS_I2C_KEYBD_ADDR, \ - CONFIG_SYS_I2C_PICIO_ADDR, \ - CONFIG_SYS_I2C_EEPROM_ADDR+0, \ - CONFIG_SYS_I2C_EEPROM_ADDR+1, \ - CONFIG_SYS_I2C_EEPROM_ADDR+2, \ - CONFIG_SYS_I2C_EEPROM_ADDR+3, \ - CONFIG_SYS_I2C_EEPROM_ADDR+4, \ - CONFIG_SYS_I2C_EEPROM_ADDR+5, \ - CONFIG_SYS_I2C_EEPROM_ADDR+6, \ - CONFIG_SYS_I2C_EEPROM_ADDR+7, \ - } +#define CONFIG_SYS_POST_I2C_ADDRS {/* CONFIG_SYS_I2C_AUDIO_ADDR, */ \ + CONFIG_SYS_I2C_SYSMON_ADDR, \ + CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_POWER_A_ADDR, \ + CONFIG_SYS_I2C_POWER_B_ADDR, \ + CONFIG_SYS_I2C_KEYBD_ADDR, \ + CONFIG_SYS_I2C_PICIO_ADDR, \ + CONFIG_SYS_I2C_EEPROM_ADDR+0, \ + CONFIG_SYS_I2C_EEPROM_ADDR+1, \ + CONFIG_SYS_I2C_EEPROM_ADDR+2, \ + CONFIG_SYS_I2C_EEPROM_ADDR+3, \ + CONFIG_SYS_I2C_EEPROM_ADDR+4, \ + CONFIG_SYS_I2C_EEPROM_ADDR+5, \ + CONFIG_SYS_I2C_EEPROM_ADDR+6, \ + CONFIG_SYS_I2C_EEPROM_ADDR+7, \ + } #endif /* CONFIG_USE_FRAM */ /*----------------------------------------------------------------------- diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index a4e92cce3b..63e22d400c 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -306,14 +306,13 @@ #define CONFIG_SYS_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */ #define CONFIG_SYS_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */ -#define I2C_ADDR_LIST { \ - CONFIG_SYS_I2C_RTC_ADDR, \ - CONFIG_SYS_I2C_EEPROM_CPU_ADDR, \ - CONFIG_SYS_I2C_EEPROM_MB_ADDR, \ - CONFIG_SYS_I2C_DSPIC_ADDR, \ - CONFIG_SYS_I2C_DSPIC_2_ADDR, \ - CONFIG_SYS_I2C_DSPIC_KEYB_ADDR, \ - CONFIG_SYS_I2C_DSPIC_IO_ADDR } +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_RTC_ADDR, \ + CONFIG_SYS_I2C_EEPROM_CPU_ADDR,\ + CONFIG_SYS_I2C_EEPROM_MB_ADDR, \ + CONFIG_SYS_I2C_DSPIC_ADDR, \ + CONFIG_SYS_I2C_DSPIC_2_ADDR, \ + CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,\ + CONFIG_SYS_I2C_DSPIC_IO_ADDR } /* * Pass open firmware flat tree diff --git a/include/configs/spieval.h b/include/configs/spieval.h index b5ac1689b8..880c8a3057 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -271,10 +271,10 @@ /* List of I2C addresses to be verified by POST */ #if defined (CONFIG_MINIFAP) -#undef I2C_ADDR_LIST -#define I2C_ADDR_LIST { CONFIG_SYS_I2C_EEPROM_ADDR, \ - CONFIG_SYS_I2C_HWMON_ADDR, \ - CONFIG_SYS_I2C_SLAVE } +#undef CONFIG_SYS_POST_I2C_ADDRS +#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \ + CONFIG_SYS_I2C_HWMON_ADDR, \ + CONFIG_SYS_I2C_SLAVE} #endif /* diff --git a/post/drivers/i2c.c b/post/drivers/i2c.c index 35081776b3..e6f4c6a1f2 100644 --- a/post/drivers/i2c.c +++ b/post/drivers/i2c.c @@ -26,10 +26,10 @@ * * For verifying the I2C bus, a full I2C bus scanning is performed. * - * #ifdef I2C_ADDR_LIST + * #ifdef CONFIG_SYS_POST_I2C_ADDRS * The test is considered as passed if all the devices and * only the devices in the list are found. - * #else [ ! I2C_ADDR_LIST ] + * #else [ ! CONFIG_SYS_POST_I2C_ADDRS ] * The test is considered as passed if any I2C device is found. * #endif */ @@ -43,7 +43,7 @@ int i2c_post_test (int flags) { unsigned int i; -#ifndef I2C_ADDR_LIST +#ifndef CONFIG_SYS_POST_I2C_ADDRS /* Start at address 1, address 0 is the general call address */ for (i = 1; i < 128; i++) if (i2c_probe (i) == 0) @@ -54,7 +54,7 @@ int i2c_post_test (int flags) #else unsigned int ret = 0; int j; - const unsigned char i2c_addr_list[] = I2C_ADDR_LIST; + const unsigned char i2c_addr_list[] = CONFIG_SYS_POST_I2C_ADDRS; /* Start at address 1, address 0 is the general call address */ for (i = 1; i < 128; i++) {