From: Alison Wang <b18965@freescale.com>
Date: Tue, 16 May 2017 02:45:57 +0000 (+0800)
Subject: arm: ls1021a: Adjust memory mapping for Flash/SD card on LS1021AQDS/TWR
X-Git-Tag: v2017.07-rc1~189^2~4
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=615bfce5640c1b577f14d95d77f1b46dfd2b500e;p=u-boot

arm: ls1021a: Adjust memory mapping for Flash/SD card on LS1021AQDS/TWR

This patch is to adjust the memory mapping for FLash/SD card on
LS1021AQDS and LS1021ATWR, such as U-Boot start address on serial
Flash, QE firmware load address and environment address.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
---

diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 373de40d29..5fcaf857fb 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -69,7 +69,7 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_QSPI_BOOT
-#define CONFIG_SYS_TEXT_BASE		0x40010000
+#define CONFIG_SYS_TEXT_BASE		0x40100000
 #endif
 
 #ifdef CONFIG_NAND_BOOT
@@ -498,7 +498,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_FSL_DEVICE_DISABLE
 
 
-#define CONFIG_SYS_QE_FW_ADDR     0x600c0000
+#define CONFIG_SYS_QE_FW_ADDR     0x60940000
 
 #ifdef CONFIG_LPUART
 #define CONFIG_EXTRA_ENV_SETTINGS       \
@@ -549,14 +549,14 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_OFFSET		0x300000
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x2000
 #elif defined(CONFIG_QSPI_BOOT)
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE			0x2000          /* 8KB */
-#define CONFIG_ENV_OFFSET		0x100000        /* 1MB */
+#define CONFIG_ENV_OFFSET		0x300000        /* 3MB */
 #define CONFIG_ENV_SECT_SIZE		0x10000
 #elif defined(CONFIG_NAND_BOOT)
 #define CONFIG_ENV_IS_IN_NAND
@@ -564,7 +564,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_OFFSET		(10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 #else
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SIZE			0x2000
 #define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
 #endif
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 1ff3d9ee9e..2a20dec9ab 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -133,7 +133,7 @@
 #endif
 
 #ifdef CONFIG_QSPI_BOOT
-#define CONFIG_SYS_TEXT_BASE		0x40010000
+#define CONFIG_SYS_TEXT_BASE		0x40100000
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
@@ -409,7 +409,7 @@
 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 #endif
 
-#define CONFIG_SYS_QE_FW_ADDR     0x600c0000
+#define CONFIG_SYS_QE_FW_ADDR     0x60940000
 
 /*
  * Environment
@@ -417,18 +417,18 @@
 #define CONFIG_ENV_OVERWRITE
 
 #if defined(CONFIG_SD_BOOT)
-#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_OFFSET		0x300000
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x20000
 #elif defined(CONFIG_QSPI_BOOT)
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_OFFSET		0x300000
 #define CONFIG_ENV_SECT_SIZE		0x10000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x300000)
 #define CONFIG_ENV_SIZE			0x20000
 #define CONFIG_ENV_SECT_SIZE		0x20000 /* 128K (one sector) */
 #endif