From: Lokesh Vutla Date: Wed, 3 Jun 2015 09:13:21 +0000 (+0530) Subject: ARM: DRA7: DDR3: Add support for HW leveling X-Git-Tag: v2015.07-rc3~86 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=6213db78f4820816fc52c807dfab47bb3266c809;p=u-boot ARM: DRA7: DDR3: Add support for HW leveling DRA7 EMIF supports Full leveling for DDR3. Adding support for the Full leveling sequence. Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index c01a98f719..3ee4695ea3 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -242,13 +242,122 @@ static void omap5_ddr3_leveling(u32 base, const struct emif_regs *regs) __udelay(130); } -static void ddr3_leveling(u32 base, const struct emif_regs *regs) +static void update_hwleveling_output(u32 base, const struct emif_regs *regs) { - if (is_omap54xx()) - omap5_ddr3_leveling(base, regs); + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 *emif_ext_phy_ctrl_reg, *emif_phy_status; + u32 reg, i; + + emif_phy_status = (u32 *)&emif->emif_ddr_phy_status[7]; + + /* Update PHY_REG_RDDQS_RATIO */ + emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_7; + for (i = 0; i < PHY_RDDQS_RATIO_REGS; i++) { + reg = readl(emif_phy_status++); + writel(reg, emif_ext_phy_ctrl_reg++); + writel(reg, emif_ext_phy_ctrl_reg++); + } + + /* Update PHY_REG_FIFO_WE_SLAVE_RATIO */ + emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_2; + for (i = 0; i < PHY_FIFO_WE_SLAVE_RATIO_REGS; i++) { + reg = readl(emif_phy_status++); + writel(reg, emif_ext_phy_ctrl_reg++); + writel(reg, emif_ext_phy_ctrl_reg++); + } + + /* Update PHY_REG_WR_DQ/DQS_SLAVE_RATIO */ + emif_ext_phy_ctrl_reg = (u32 *)&emif->emif_ddr_ext_phy_ctrl_12; + for (i = 0; i < PHY_REG_WR_DQ_SLAVE_RATIO_REGS; i++) { + reg = readl(emif_phy_status++); + writel(reg, emif_ext_phy_ctrl_reg++); + writel(reg, emif_ext_phy_ctrl_reg++); + } + + /* Disable Leveling */ + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw); + writel(0x0, &emif->emif_rd_wr_lvl_rmp_ctl); } -static void ddr3_init(u32 base, const struct emif_regs *regs) +static void dra7_ddr3_leveling(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + /* Clear Error Status */ + clrsetbits_le32(&emif->emif_ddr_ext_phy_ctrl_36, + EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR, + EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR); + + clrsetbits_le32(&emif->emif_ddr_ext_phy_ctrl_36_shdw, + EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR, + EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR); + + /* Disable refreshed before leveling */ + clrsetbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_SHIFT, + EMIF_REG_INITREF_DIS_SHIFT); + + /* Start Full leveling */ + writel(DDR3_FULL_LVL, &emif->emif_rd_wr_lvl_ctl); + + __udelay(300); + + /* Check for leveling timeout */ + if (readl(&emif->emif_status) & EMIF_REG_LEVELING_TO_MASK) { + printf("Leveling timeout on EMIF%d\n", emif_num(base)); + return; + } + + /* Enable refreshes after leveling */ + clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_SHIFT); + + debug("HW leveling success\n"); + /* + * Update slave ratios in EXT_PHY_CTRLx registers + * as per HW leveling output + */ + update_hwleveling_output(base, regs); +} + +static void dra7_ddr3_init(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + + if (warm_reset()) + emif_reset_phy(base); + do_ext_phy_settings(base, regs); + + writel(regs->ref_ctrl | EMIF_REG_INITREF_DIS_MASK, + &emif->emif_sdram_ref_ctrl); + /* Update timing registers */ + writel(regs->sdram_tim1, &emif->emif_sdram_tim_1); + writel(regs->sdram_tim2, &emif->emif_sdram_tim_2); + writel(regs->sdram_tim3, &emif->emif_sdram_tim_3); + + writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0, &emif->emif_l3_config); + writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); + writel(regs->zq_config, &emif->emif_zq_config); + writel(regs->temp_alert_config, &emif->emif_temp_alert_config); + writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); + writel(regs->emif_rd_wr_lvl_ctl, &emif->emif_rd_wr_lvl_ctl); + + writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1); + writel(regs->emif_rd_wr_exec_thresh, &emif->emif_rd_wr_exec_thresh); + + writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl); + + writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); + writel(regs->sdram_config_init, &emif->emif_sdram_config); + + __udelay(1000); + + writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl); + + if (regs->emif_rd_wr_lvl_rmp_ctl & EMIF_REG_RDWRLVL_EN_MASK) + dra7_ddr3_leveling(base, regs); +} + +static void omap5_ddr3_init(u32 base, const struct emif_regs *regs) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; @@ -269,25 +378,20 @@ static void ddr3_init(u32 base, const struct emif_regs *regs) writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl); - /* - * The same sequence should work on OMAP5432 as well. But strange that - * it is not working - */ - if (is_dra7xx()) { - do_ext_phy_settings(base, regs); - writel(regs->ref_ctrl_final, &emif->emif_sdram_ref_ctrl); - writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); - writel(regs->sdram_config_init, &emif->emif_sdram_config); - } else { - writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); - writel(regs->sdram_config_init, &emif->emif_sdram_config); - do_ext_phy_settings(base, regs); - } + writel(regs->sdram_config2, &emif->emif_lpddr2_nvm_config); + writel(regs->sdram_config_init, &emif->emif_sdram_config); + do_ext_phy_settings(base, regs); - /* enable leveling */ writel(regs->emif_rd_wr_lvl_rmp_ctl, &emif->emif_rd_wr_lvl_rmp_ctl); + omap5_ddr3_leveling(base, regs); +} - ddr3_leveling(base, regs); +static void ddr3_init(u32 base, const struct emif_regs *regs) +{ + if (is_omap54xx()) + omap5_ddr3_init(base, regs); + else + dra7_ddr3_init(base, regs); } #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS @@ -1075,7 +1179,7 @@ static void do_sdram_init(u32 base) if (warm_reset() && (emif_sdram_type() == EMIF_SDRAM_TYPE_DDR3)) { set_lpmode_selfrefresh(base); emif_reset_phy(base); - ddr3_leveling(base, regs); + omap5_ddr3_leveling(base, regs); } /* Write to the shadow registers */ diff --git a/arch/arm/cpu/armv7/omap5/sdram.c b/arch/arm/cpu/armv7/omap5/sdram.c index 5f8daa1ee1..2e2385286c 100644 --- a/arch/arm/cpu/armv7/omap5/sdram.c +++ b/arch/arm/cpu/armv7/omap5/sdram.c @@ -421,8 +421,14 @@ const u32 ddr3_ext_phy_ctrl_const_base_es2[] = { 0x0 }; +/* Ext phy ctrl 1-35 regs */ const u32 dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { + 0x10040100, + 0x00910091, + 0x00950095, + 0x009B009B, + 0x009E009E, 0x00980098, 0x00340034, 0x00350035, @@ -441,7 +447,7 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { 0x00500050, 0x00000000, 0x00600020, - 0x40010080, + 0x40011080, 0x08102040, 0x0, 0x0, @@ -450,8 +456,14 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif1[] = { 0x0 }; +/* Ext phy ctrl 1-35 regs */ const u32 dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { + 0x10040100, + 0x00910091, + 0x00950095, + 0x009B009B, + 0x009E009E, 0x00980098, 0x00330033, 0x00330033, @@ -470,7 +482,7 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { 0x00500050, 0x00000000, 0x00600020, - 0x40010080, + 0x40011080, 0x08102040, 0x0, 0x0, @@ -479,8 +491,14 @@ dra_ddr3_ext_phy_ctrl_const_base_es1_emif2[] = { 0x0 }; +/* Ext phy ctrl 1-35 regs */ const u32 dra_ddr3_ext_phy_ctrl_const_base_666MHz[] = { + 0x10040100, + 0x00A400A4, + 0x00A900A9, + 0x00B000B0, + 0x00B000B0, 0x00A400A4, 0x00390039, 0x00320032, @@ -562,7 +580,7 @@ void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs) *regs = &mr_regs; } -void do_ext_phy_settings(u32 base, const struct emif_regs *regs) +static void do_ext_phy_settings_omap5(u32 base, const struct emif_regs *regs) { u32 *ext_phy_ctrl_base = 0; u32 *emif_ext_phy_ctrl_base = 0; @@ -601,6 +619,58 @@ void do_ext_phy_settings(u32 base, const struct emif_regs *regs) } } +static void do_ext_phy_settings_dra7(u32 base, const struct emif_regs *regs) +{ + struct emif_reg_struct *emif = (struct emif_reg_struct *)base; + u32 *emif_ext_phy_ctrl_base = 0; + u32 emif_nr; + const u32 *ext_phy_ctrl_const_regs; + u32 i, hw_leveling, size; + + emif_nr = (base == EMIF1_BASE) ? 1 : 2; + + hw_leveling = regs->emif_rd_wr_lvl_rmp_ctl >> EMIF_REG_RDWRLVL_EN_SHIFT; + + emif_ext_phy_ctrl_base = (u32 *)&(emif->emif_ddr_ext_phy_ctrl_1); + + emif_get_ext_phy_ctrl_const_regs(emif_nr, + &ext_phy_ctrl_const_regs, &size); + + writel(ext_phy_ctrl_const_regs[0], &emif_ext_phy_ctrl_base[0]); + writel(ext_phy_ctrl_const_regs[0], &emif_ext_phy_ctrl_base[1]); + + if (!hw_leveling) { + /* + * Copy the predefined PHY register values + * in case of sw leveling + */ + for (i = 1; i < 25; i++) { + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2]); + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2 + 1]); + } + } else { + /* + * Write the init value for HW levling to occur + */ + for (i = 21; i < 35; i++) { + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2]); + writel(ext_phy_ctrl_const_regs[i], + &emif_ext_phy_ctrl_base[i * 2 + 1]); + } + } +} + +void do_ext_phy_settings(u32 base, const struct emif_regs *regs) +{ + if (is_omap54xx()) + do_ext_phy_settings_omap5(base, regs); + else + do_ext_phy_settings_dra7(base, regs); +} + #ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS static const struct lpddr2_ac_timings timings_jedec_532_mhz = { .max_freq = 532000000, diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index 7a545ea01a..a97d2fd4ea 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -44,6 +44,8 @@ #define EMIF_REG_DUAL_CLK_MODE_MASK (1 << 30) #define EMIF_REG_FAST_INIT_SHIFT 29 #define EMIF_REG_FAST_INIT_MASK (1 << 29) +#define EMIF_REG_LEVLING_TO_SHIFT 4 +#define EMIF_REG_LEVELING_TO_MASK (7 << 4) #define EMIF_REG_PHY_DLL_READY_SHIFT 2 #define EMIF_REG_PHY_DLL_READY_MASK (1 << 2) @@ -509,6 +511,13 @@ #define EMIF_REG_RDWRLVLINC_RMP_WIN_SHIFT 0 #define EMIF_REG_RDWRLVLINC_RMP_WIN_MASK (0x1FFF << 0) +/* EMIF_PHY_CTRL_36 */ +#define EMIF_REG_PHY_FIFO_WE_IN_MISALINED_CLR (1 << 8) + +#define PHY_RDDQS_RATIO_REGS 5 +#define PHY_FIFO_WE_SLAVE_RATIO_REGS 5 +#define PHY_REG_WR_DQ_SLAVE_RATIO_REGS 10 + /*Leveling Fields */ #define DDR3_WR_LVL_INT 0x73 #define DDR3_RD_LVL_INT 0x33 diff --git a/board/ti/beagle_x15/board.c b/board/ti/beagle_x15/board.c index ffcd53185b..b32d0909c4 100644 --- a/board/ti/beagle_x15/board.c +++ b/board/ti/beagle_x15/board.c @@ -68,7 +68,13 @@ static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = { .emif_rd_wr_exec_thresh = 0x00000305 }; +/* Ext phy ctrl regs 1-35 */ static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = { + 0x10040100, + 0x00740074, + 0x00780078, + 0x007c007c, + 0x007b007b, 0x00800080, 0x00360036, 0x00340034, @@ -90,7 +96,7 @@ static const u32 beagle_x15_emif1_ddr3_ext_phy_ctrl_const_regs[] = { 0x00000000, 0x00600020, - 0x40010080, + 0x40011080, 0x08102040, 0x00400040, @@ -126,6 +132,11 @@ static const struct emif_regs beagle_x15_emif2_ddr3_532mhz_emif_regs = { }; static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = { + 0x10040100, + 0x00820082, + 0x008b008b, + 0x00800080, + 0x007e007e, 0x00800080, 0x00370037, 0x00390039, @@ -145,7 +156,7 @@ static const u32 beagle_x15_emif2_ddr3_ext_phy_ctrl_const_regs[] = { 0x00000000, 0x00600020, - 0x40010080, + 0x40011080, 0x08102040, 0x00400040,