From: Prafulla Wadaskar Date: Wed, 3 Mar 2010 09:57:37 +0000 (+0530) Subject: arm: kirkwood: suen3: fixed build warning X-Git-Tag: v2010.03-rc1~17 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=637833c2d669f9a370706e275e7103454c3c83ec;p=u-boot arm: kirkwood: suen3: fixed build warning This patch fixes following build warning Invalid Kwbimage command Type - valid names are: BOOT_FROM, NAND_ECC_MODE, NAND_PAGE_SIZE, SATA_PIO_MODE, DDR_INIT_DELAY, DATA, , spi, nand, sata, pex, uart Signed-off-by: Prafulla Wadaskar --- diff --git a/board/keymile/km_arm/kwbimage.cfg b/board/keymile/km_arm/kwbimage.cfg index d6edd27943..26d6aa09d9 100644 --- a/board/keymile/km_arm/kwbimage.cfg +++ b/board/keymile/km_arm/kwbimage.cfg @@ -64,7 +64,6 @@ DATA 0xFFD01400 0x43000400 # SDRAM Configuration Register # bit31-30: 01 DATA 0xFFD01404 0x36343000 # DDR Controller Control Low - 0x38543000 # bit 3-0: 0 reserved # bit 4: 0=addr/cmd in smame cycle # bit 5: 0=clk is driven during self refresh, we don't care for APX @@ -170,7 +169,7 @@ DATA 0xFFD0149C 0x0000E90F # CPU ODT Control # bit11-10:2, DQ_ODTSel. ODT select turned on, 75 ohm DATA 0xFFD01480 0x00000001 # DDR Initialization Control -#bit0=1, enable DDR init upon this register write +# bit0=1, enable DDR init upon this register write # End of Header extension DATA 0x0 0x0