From: Andre Renaud Date: Thu, 5 May 2016 13:28:15 +0000 (-0600) Subject: at91: nand: Set up the ECC strength correctly X-Git-Tag: v2016.07-rc2~41^2~9 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=65319f15ca6ed1be6ca12576fe96a338352d45b7;p=u-boot at91: nand: Set up the ECC strength correctly This needs to be set to avoid a fatal error when ECC is used. Signed-off-by: Andre Renaud Signed-off-by: Simon Glass Reviewed-by: Andreas Bießmann --- diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index debf93318a..ad5ded3a56 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -1156,6 +1156,7 @@ int atmel_hwecc_nand_init_param(struct nand_chip *nand, struct mtd_info *mtd) nand->ecc.hwctl = atmel_nand_hwctl; nand->ecc.read_page = atmel_nand_read_page; nand->ecc.bytes = 4; + nand->ecc.strength = 4; if (nand->ecc.mode == NAND_ECC_HW) { /* ECC is calculated for the whole page (1 step) */