From: Masahiro Yamada Date: Fri, 20 Jan 2017 09:04:43 +0000 (+0900) Subject: arm64: spin-table: add more information in Kconfig help X-Git-Tag: v2017.03-rc1~17 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=65f321966177895ecdd2bdd21f3770f1746a9f8b;p=u-boot arm64: spin-table: add more information in Kconfig help This feature seems to be sometimes misunderstood. The intention is: [1] Bring the slaves into the U-Boot proper image, not SPL (unless you have a special reason to do otherwise). [2] The operation must be done in a board (SoC) specific manner since how to wake the slaves from the Boot ROM is SoC specific. [3] The slaves must enter U-Boot proper after U-Boot relocates itself because the "cpu-release-addr" property points to the relocated memory area. [2] is already explained in the help. We can make [1] even clearer by mentioning "U-Boot proper" instead of "U-Boot". [3] is missing, so I am adding it to the list. Instead, "before the master CPU jumps to the kernel" is a matter of course, so removed. Signed-off-by: Masahiro Yamada --- diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 0b3d98ef2a..0188b95e99 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -30,8 +30,10 @@ config ARMV8_SPIN_TABLE To use this feature, you must do: - Specify enable-method = "spin-table" in each CPU node in the Device Tree you are using to boot the kernel - - Let secondary CPUs in U-Boot (in a board specific manner) - before the master CPU jumps to the kernel + - Bring secondary CPUs into U-Boot proper in a board specific + manner. This must be done *after* relocation. Otherwise, the + secondary CPUs will spin in unprotected memory area because the + master CPU protects the relocated spin code. U-Boot automatically does: - Set "cpu-release-addr" property of each CPU node