From: Wolfgang Denk Date: Sat, 29 Oct 2011 09:37:34 +0000 (+0000) Subject: drivers/net/ns8382x.c: fix GCC 4.6 build warnings X-Git-Tag: v2011.12-rc1~331 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=675b46bbac183b33a69c55b2c0dcc76ff02f4567;p=u-boot drivers/net/ns8382x.c: fix GCC 4.6 build warnings Fix: ns8382x.c: In function 'ns8382x_check_duplex': ns8382x.c:704:6: warning: variable 'hun' set but not used [-Wunused-but-set-variable] To fix this, we get rid of the NS8382X_DEBUG code and use standard debug() instead. This will now trigger a so far undetected warning: ns8382x.c:780:2: warning: format '%X' expects argument of type 'unsigned int', but argument 2 has type 'long unsigned int' [-Wformat] Fix that, too. Signed-off-by: Wolfgang Denk --- diff --git a/drivers/net/ns8382x.c b/drivers/net/ns8382x.c index 6dfcd0e94c..11863feba3 100644 --- a/drivers/net/ns8382x.c +++ b/drivers/net/ns8382x.c @@ -322,9 +322,7 @@ ns8382x_initialize(bd_t * bis) pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); iobase &= ~0x3; /* 1: unused and 0:I/O Space Indicator */ -#ifdef NS8382X_DEBUG - printf("ns8382x: NatSemi dp8382x @ 0x%x\n", iobase); -#endif + debug("ns8382x: NatSemi dp8382x @ 0x%x\n", iobase); pci_write_config_dword(devno, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); @@ -382,11 +380,9 @@ ns8382x_initialize(bd_t * bis) rev = mdio_read(dev, phyAddress, PHYIDR2); if ((rev & ~(0x000f)) == 0x00005c50 || (rev & ~(0x000f)) == 0x00005c60) { -#ifdef NS8382X_DEBUG - printf("phy rev is %x\n", rev); - printf("phy address is %x\n", + debug("phy rev is %x\n", rev); + debug("phy address is %x\n", phyAddress); -#endif break; } } @@ -411,21 +407,21 @@ ns8382x_initialize(bd_t * bis) OUTL(dev, (chip_config & ~(PhyDis)), ChipConfig); mdio_sync(dev, EECtrl); -#ifdef NS8382X_DEBUG + { u32 chpcfg = INL(dev, ChipConfig) ^ SpeedStatus_Polarity; - printf("%s: Transceiver 10%s %s duplex.\n", dev->name, + debug("%s: Transceiver 10%s %s duplex.\n", dev->name, (chpcfg & GigSpeed) ? "00" : (chpcfg & HundSpeed) ? "0" : "", chpcfg & FullDuplex ? "full" : "half"); - printf("%s: %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, + debug("%s: %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, dev->enetaddr[0], dev->enetaddr[1], dev->enetaddr[2], dev->enetaddr[3], dev->enetaddr[4], dev->enetaddr[5]); } -#endif + /* Disable PME: * The PME bit is initialized from the EEPROM contents. * PCI cards probably have PME disabled, but motherboard @@ -563,10 +559,10 @@ ns8382x_init(struct eth_device *dev, bd_t * bis) tx_config = TxCarrierIgn | TxHeartIgn | TxAutoPad | TxCollRetry | TxMxdma_1024 | (0x1002); rx_config = RxMxdma_1024 | 0x20; -#ifdef NS8382X_DEBUG - printf("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config); - printf("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config); -#endif + + debug("%s: Setting TxConfig Register %#08X\n", dev->name, tx_config); + debug("%s: Setting RxConfig Register %#08X\n", dev->name, rx_config); + OUTL(dev, tx_config, TxConfig); OUTL(dev, rx_config, RxConfig); @@ -629,10 +625,9 @@ ns8382x_init_txd(struct eth_device *dev) OUTL(dev, 0x0, TxRingPtrHi); OUTL(dev, phys_to_bus((u32)&txd), TxRingPtr); -#ifdef NS8382X_DEBUG - printf("ns8382x_init_txd: TX descriptor register loaded with: %#08X (&txd: %p)\n", + + debug("ns8382x_init_txd: TX descriptor register loaded with: %#08X (&txd: %p)\n", INL(dev, TxRingPtr), &txd); -#endif } /* Function: ns8382x_init_rxd @@ -658,19 +653,16 @@ ns8382x_init_rxd(struct eth_device *dev) rxd[i].extsts = cpu_to_le32((u32) 0x0); rxd[i].cmdsts = cpu_to_le32((u32) RX_BUF_SIZE); rxd[i].bufptr = cpu_to_le32((u32) & rxb[i * RX_BUF_SIZE]); -#ifdef NS8382X_DEBUG - printf + + debug ("ns8382x_init_rxd: rxd[%d]=%p link=%X cmdsts=%X bufptr=%X\n", i, &rxd[i], le32_to_cpu(rxd[i].link), le32_to_cpu(rxd[i].cmdsts), le32_to_cpu(rxd[i].bufptr)); -#endif } OUTL(dev, phys_to_bus((u32) & rxd), RxRingPtr); -#ifdef NS8382X_DEBUG - printf("ns8382x_init_rxd: RX descriptor register loaded with: %X\n", + debug("ns8382x_init_rxd: RX descriptor register loaded with: %X\n", INL(dev, RxRingPtr)); -#endif } /* Function: ns8382x_set_rx_mode @@ -708,11 +700,11 @@ ns8382x_check_duplex(struct eth_device *dev) duplex = (config & FullDuplex) ? 1 : 0; gig = (config & GigSpeed) ? 1 : 0; hun = (config & HundSpeed) ? 1 : 0; -#ifdef NS8382X_DEBUG - printf("%s: Setting 10%s %s-duplex based on negotiated link" + + debug("%s: Setting 10%s %s-duplex based on negotiated link" " capability.\n", dev->name, (gig) ? "00" : (hun) ? "0" : "", duplex ? "full" : "half"); -#endif + if (duplex) { rx_config |= RxAcceptTx; tx_config |= (TxCarrierIgn | TxHeartIgn); @@ -720,10 +712,10 @@ ns8382x_check_duplex(struct eth_device *dev) rx_config &= ~RxAcceptTx; tx_config &= ~(TxCarrierIgn | TxHeartIgn); } -#ifdef NS8382X_DEBUG - printf("%s: Resetting TxConfig Register %#08X\n", dev->name, tx_config); - printf("%s: Resetting RxConfig Register %#08X\n", dev->name, rx_config); -#endif + + debug("%s: Resetting TxConfig Register %#08X\n", dev->name, tx_config); + debug("%s: Resetting RxConfig Register %#08X\n", dev->name, rx_config); + OUTL(dev, tx_config, TxConfig); OUTL(dev, rx_config, RxConfig); @@ -735,9 +727,8 @@ ns8382x_check_duplex(struct eth_device *dev) else config &= ~Mode1000; -#ifdef NS8382X_DEBUG - printf("%s: %setting Mode1000\n", dev->name, (gig) ? "S" : "Uns"); -#endif + debug("%s: %setting Mode1000\n", dev->name, (gig) ? "S" : "Uns"); + OUTL(dev, config, ChipConfig); } @@ -752,9 +743,8 @@ ns8382x_send(struct eth_device *dev, volatile void *packet, int length) /* Stop the transmitter */ OUTL(dev, TxOff, ChipCmd); -#ifdef NS8382X_DEBUG - printf("ns8382x_send: sending %d bytes\n", (int)length); -#endif + + debug("ns8382x_send: sending %d bytes\n", (int)length); /* set the transmit buffer descriptor and enable Transmit State Machine */ txd.link = cpu_to_le32(0x0); @@ -764,13 +754,13 @@ ns8382x_send(struct eth_device *dev, volatile void *packet, int length) /* load Transmit Descriptor Register */ OUTL(dev, phys_to_bus((u32) & txd), TxRingPtr); -#ifdef NS8382X_DEBUG - printf("ns8382x_send: TX descriptor register loaded with: %#08X\n", + + debug("ns8382x_send: TX descriptor register loaded with: %#08X\n", INL(dev, TxRingPtr)); - printf("\ttxd.link:%X\tbufp:%X\texsts:%X\tcmdsts:%X\n", + debug("\ttxd.link:%X\tbufp:%X\texsts:%X\tcmdsts:%X\n", le32_to_cpu(txd.link), le32_to_cpu(txd.bufptr), le32_to_cpu(txd.extsts), le32_to_cpu(txd.cmdsts)); -#endif + /* restart the transmitter */ OUTL(dev, TxOn, ChipCmd); @@ -786,12 +776,11 @@ ns8382x_send(struct eth_device *dev, volatile void *packet, int length) printf("ns8382x_send: Transmit error, Tx status %lX.\n", tx_stat); goto Done; } -#ifdef NS8382X_DEBUG - printf("ns8382x_send: tx_stat: %#08X\n", tx_stat); -#endif + + debug("ns8382x_send: tx_stat: %#08lX\n", tx_stat); status = 1; - Done: +Done: return status; } @@ -814,10 +803,10 @@ ns8382x_poll(struct eth_device *dev) if (!(rx_status & (u32) DescOwn)) return retstat; -#ifdef NS8382X_DEBUG - printf("ns8382x_poll: got a packet: cur_rx:%u, status:%lx\n", + + debug("ns8382x_poll: got a packet: cur_rx:%u, status:%lx\n", cur_rx, rx_status); -#endif + length = (rx_status & DSIZE) - CRC_SIZE; if ((rx_status & (DescMore | DescPktOK | DescRxLong)) != DescPktOK) {