From: Suriyan Ramasami Date: Wed, 29 Oct 2014 16:22:43 +0000 (-0700) Subject: arm: odroid: usb: add support for usb host including ethernet X-Git-Tag: v2015.01-rc3~54^2~4 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=6a23c6533c880d557e786df81fa21b62168db6d9;p=u-boot arm: odroid: usb: add support for usb host including ethernet This change adds support for enabling the USB host features of the board. This includes the USB3503A hub and the SMC LAN9730 ethernet controller as well. Signed-off-by: Suriyan Ramasami Signed-off-by: Minkyu Kang --- diff --git a/arch/arm/dts/exynos4412-odroid.dts b/arch/arm/dts/exynos4412-odroid.dts index 2a1f1dda4e..c78efec649 100644 --- a/arch/arm/dts/exynos4412-odroid.dts +++ b/arch/arm/dts/exynos4412-odroid.dts @@ -67,4 +67,15 @@ div = <0x3>; index = <4>; }; + + ehci@12580000 { + compatible = "samsung,exynos-ehci"; + reg = <0x12580000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + phy { + compatible = "samsung,exynos-usb-phy"; + reg = <0x125B0000 0x100>; + }; + }; }; diff --git a/arch/arm/include/asm/arch-exynos/ehci.h b/arch/arm/include/asm/arch-exynos/ehci.h index d2d70bd82b..3800fa9044 100644 --- a/arch/arm/include/asm/arch-exynos/ehci.h +++ b/arch/arm/include/asm/arch-exynos/ehci.h @@ -12,6 +12,13 @@ #define CLK_24MHZ 5 +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) +#define PHYPWR_NORMAL_MASK_PHY1 (0x7 << 6) +#define PHYPWR_NORMAL_MASK_HSIC0 (0x7 << 9) +#define PHYPWR_NORMAL_MASK_HSIC1 (0x7 << 12) +#define RSTCON_HOSTPHY_SWRST (0xf << 3) +#define RSTCON_SWRST (0x1 << 0) + #define HOST_CTRL0_PHYSWRSTALL (1 << 31) #define HOST_CTRL0_COMMONON_N (1 << 9) #define HOST_CTRL0_SIDDQ (1 << 6) @@ -61,6 +68,12 @@ struct exynos_usb_phy { unsigned int usbotgtune; }; +struct exynos4412_usb_phy { + unsigned int usbphyctrl; + unsigned int usbphyclk; + unsigned int usbphyrstcon; +}; + /* Switch on the VBUS power. */ int board_usb_vbus_init(void); diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index 33003ee9b5..f7396ab4c4 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -462,9 +462,41 @@ struct s3c_plat_otg_data s5pc210_otg_data = { .usb_phy_ctrl = EXYNOS4X12_USBPHY_CONTROL, .usb_flags = PHY0_SLEEP, }; +#endif + +#if defined(CONFIG_USB_GADGET) || defined(CONFIG_CMD_USB) int board_usb_init(int index, enum usb_init_type init) { +#ifdef CONFIG_CMD_USB + struct pmic *p_pmic; + + /* Set Ref freq 0 => 24MHz, 1 => 26MHz*/ + /* Odroid Us have it at 24MHz, Odroid Xs at 26MHz */ + if (gd->board_type == ODROID_TYPE_U3) + gpio_direction_output(EXYNOS4X12_GPIO_X30, 0); + else + gpio_direction_output(EXYNOS4X12_GPIO_X30, 1); + + /* Disconnect, Reset, Connect */ + gpio_direction_output(EXYNOS4X12_GPIO_X34, 0); + gpio_direction_output(EXYNOS4X12_GPIO_X35, 0); + gpio_direction_output(EXYNOS4X12_GPIO_X35, 1); + gpio_direction_output(EXYNOS4X12_GPIO_X34, 1); + + /* Power off and on BUCK8 for LAN9730 */ + debug("LAN9730 - Turning power buck 8 OFF and ON.\n"); + + p_pmic = pmic_get("MAX77686_PMIC"); + if (p_pmic && !pmic_probe(p_pmic)) { + max77686_set_buck_mode(p_pmic, 8, OPMODE_OFF); + max77686_set_buck_voltage(p_pmic, 8, 750000); + max77686_set_buck_voltage(p_pmic, 8, 3300000); + max77686_set_buck_mode(p_pmic, 8, OPMODE_ON); + } + +#endif + debug("USB_udc_probe\n"); return s3c_udc_probe(&s5pc210_otg_data); } diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index edd91a84a7..6fdbf5724f 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -85,15 +85,10 @@ static int exynos_usb_parse_dt(const void *blob, struct exynos_ehci *exynos) } #endif -/* Setup the EHCI host controller. */ -static void setup_usb_phy(struct exynos_usb_phy *usb) +static void exynos5_setup_usb_phy(struct exynos_usb_phy *usb) { u32 hsic_ctrl; - set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN); - - set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN); - clrbits_le32(&usb->usbphyctrl0, HOST_CTRL0_FSEL_MASK | HOST_CTRL0_COMMONON_N | @@ -150,8 +145,34 @@ static void setup_usb_phy(struct exynos_usb_phy *usb) EHCICTRL_ENAINCR16); } -/* Reset the EHCI host controller. */ -static void reset_usb_phy(struct exynos_usb_phy *usb) +static void exynos4412_setup_usb_phy(struct exynos4412_usb_phy *usb) +{ + writel(CLK_24MHZ, &usb->usbphyclk); + + clrbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 | + PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 | + PHYPWR_NORMAL_MASK_PHY0)); + + setbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST)); + udelay(10); + clrbits_le32(&usb->usbphyrstcon, (RSTCON_HOSTPHY_SWRST | RSTCON_SWRST)); +} + +static void setup_usb_phy(struct exynos_usb_phy *usb) +{ + set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN); + + set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN); + + if (cpu_is_exynos5()) + exynos5_setup_usb_phy(usb); + else if (cpu_is_exynos4()) + if (proid_is_exynos4412()) + exynos4412_setup_usb_phy((struct exynos4412_usb_phy *) + usb); +} + +static void exynos5_reset_usb_phy(struct exynos_usb_phy *usb) { u32 hsic_ctrl; @@ -171,6 +192,24 @@ static void reset_usb_phy(struct exynos_usb_phy *usb) setbits_le32(&usb->hsicphyctrl1, hsic_ctrl); setbits_le32(&usb->hsicphyctrl2, hsic_ctrl); +} + +static void exynos4412_reset_usb_phy(struct exynos4412_usb_phy *usb) +{ + setbits_le32(&usb->usbphyctrl, (PHYPWR_NORMAL_MASK_HSIC0 | + PHYPWR_NORMAL_MASK_HSIC1 | PHYPWR_NORMAL_MASK_PHY1 | + PHYPWR_NORMAL_MASK_PHY0)); +} + +/* Reset the EHCI host controller. */ +static void reset_usb_phy(struct exynos_usb_phy *usb) +{ + if (cpu_is_exynos5()) + exynos5_reset_usb_phy(usb); + else if (cpu_is_exynos4()) + if (proid_is_exynos4412()) + exynos4412_reset_usb_phy((struct exynos4412_usb_phy *) + usb); set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE); } diff --git a/include/configs/odroid.h b/include/configs/odroid.h index b928af839e..807e96bbaa 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -198,6 +198,19 @@ #define CONFIG_CMD_GPIO +/* USB */ +#define CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_EXYNOS +#define CONFIG_USB_STORAGE + +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_CMD_NET +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX + /* * Supported Odroid boards: X3, U3 * TODO: Add Odroid X support