From: Becky Bruce Date: Fri, 17 Dec 2010 23:17:55 +0000 (-0600) Subject: mpc85xx/tlb.c: Allow platforms to specify wimge bits X-Git-Tag: v2011.03-rc1~29^2~39 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=6b1ef2a6a553c33e74c5e50c77b55d40af669be3;p=u-boot mpc85xx/tlb.c: Allow platforms to specify wimge bits Some platforms might want to override the default wimge=0 for DDR. Add CONFIG_SYS_PPC_DDR_WIMGE for those platforms to use. This will initially only be used by TQM85xx, but could be useful for other boards or testing going forward. Note that the name of this define is not 85xx-specific. WIMGE is a fairly universal concept, so any ppc platforms that require different WIMGE settings for DDR can use the same #define. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala --- diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index e3a71aec5c..31143ba530 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -250,10 +250,14 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) { int i; unsigned int tlb_size; + unsigned int wimge = 0; unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE; unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf; u64 size, memsize = (u64)memsize_in_meg << 20; +#ifdef CONFIG_SYS_PPC_DDR_WIMGE + wimge = CONFIG_SYS_PPC_DDR_WIMGE; +#endif size = min(memsize, CONFIG_MAX_MEM_MAPPED); /* Convert (4^max) kB to (2^max) bytes */ @@ -277,7 +281,7 @@ setup_ddr_tlbs_phys(phys_addr_t p_addr, unsigned int memsize_in_meg) tlb_size = (camsize - 10) / 2; set_tlb(1, ram_tlb_address, p_addr, - MAS3_SX|MAS3_SW|MAS3_SR, 0, + MAS3_SX|MAS3_SW|MAS3_SR, wimge, 0, ram_tlb_index, tlb_size, 1); size -= 1ULL << camsize;