From: Ye.Li Date: Thu, 20 Nov 2014 13:14:15 +0000 (+0800) Subject: mx6: mx6sabre common: Enable i.MX thermal DM driver X-Git-Tag: v2015.01-rc2~3^2~14 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=6c920ee91039ef27fec9e7c5591fa79ad4b4f8d1;p=u-boot mx6: mx6sabre common: Enable i.MX thermal DM driver Enable i.MX thermal DM driver to mx6sabre_common.h file. Since the thermal is used in init_sequence_f, so define the CONFIG_SYS_MALLOC_F_LEN to support DM driver using in pre relocation phase. Additional, thermal driver depends on ocotp, make sure to enable CONFIG_MXC_OCOTP when CONFIG_IMX6_THERMAL is selected. Signed-off-by: Ye.Li Signed-off-by: Nitin Garg --- diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index 1e104229f9..9fdd8410a4 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -25,6 +25,11 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG +#define CONFIG_DM +#define CONFIG_DM_THERMAL +#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) +#define CONFIG_IMX6_THERMAL + #define CONFIG_SYS_GENERIC_BOARD /* Size of malloc() pool */ @@ -37,7 +42,7 @@ #define CONFIG_MXC_UART #define CONFIG_CMD_FUSE -#ifdef CONFIG_CMD_FUSE +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) #define CONFIG_MXC_OCOTP #endif