From: Simon Glass Date: Mon, 31 Aug 2015 01:19:32 +0000 (-0600) Subject: arm: Remove vl_ma2sc board X-Git-Tag: v2015.10-rc4~131 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=6e830dfc1aaa3780422e22c599c77dbcb0575759;p=u-boot arm: Remove vl_ma2sc board This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass --- diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 26ba5ace03..fdaf328722 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -91,10 +91,6 @@ config TARGET_SAMA5D4EK select CPU_V7 select SUPPORT_SPL -config TARGET_VL_MA2SC - bool "Support vl_ma2sc" - select CPU_ARM926EJS - config TARGET_MEESC bool "Support meesc" select CPU_ARM926EJS @@ -132,7 +128,6 @@ source "board/atmel/sama5d3xek/Kconfig" source "board/atmel/sama5d4_xplained/Kconfig" source "board/atmel/sama5d4ek/Kconfig" source "board/bluewater/snapper9260/Kconfig" -source "board/BuS/vl_ma2sc/Kconfig" source "board/calao/usb_a9263/Kconfig" source "board/egnite/ethernut5/Kconfig" source "board/esd/meesc/Kconfig" diff --git a/board/BuS/vl_ma2sc/Kconfig b/board/BuS/vl_ma2sc/Kconfig deleted file mode 100644 index 848177f4c4..0000000000 --- a/board/BuS/vl_ma2sc/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_VL_MA2SC - -config SYS_BOARD - default "vl_ma2sc" - -config SYS_VENDOR - default "BuS" - -config SYS_CONFIG_NAME - default "vl_ma2sc" - -endif diff --git a/board/BuS/vl_ma2sc/MAINTAINERS b/board/BuS/vl_ma2sc/MAINTAINERS deleted file mode 100644 index b70104d52e..0000000000 --- a/board/BuS/vl_ma2sc/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -VL_MA2SC BOARD -M: Jens Scharsig -S: Maintained -F: board/BuS/vl_ma2sc/ -F: include/configs/vl_ma2sc.h -F: configs/vl_ma2sc_defconfig -F: configs/vl_ma2sc_ram_defconfig diff --git a/board/BuS/vl_ma2sc/Makefile b/board/BuS/vl_ma2sc/Makefile deleted file mode 100644 index d4b24ac8c2..0000000000 --- a/board/BuS/vl_ma2sc/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2009-2012 -# Jens Scharsig -# BuS Elektronik GmbH & Co. KG -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += vl_ma2sc.o diff --git a/board/BuS/vl_ma2sc/vl_ma2sc.c b/board/BuS/vl_ma2sc/vl_ma2sc.c deleted file mode 100644 index e4e1a8572f..0000000000 --- a/board/BuS/vl_ma2sc/vl_ma2sc.c +++ /dev/null @@ -1,519 +0,0 @@ -/* - * (C) Copyright 2009-2012 - * Jens Scharsig - * BuS Elektronik GmbH & Co. KG - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) -#include -#endif -#include - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_CMD_NAND -static void vl_ma2sc_nand_hw_init(void) -{ - unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0; - at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_pio_output(AT91_PIO_PORTA, 13, 1); /* CAN_TX -> H */ - at91_set_pio_output(AT91_PIO_PORTA, 12, 1); /* CAN_STB -> H */ - at91_set_pio_output(AT91_PIO_PORTA, 11, 1); /* CAN_EN -> H */ - - /* Enable CS3 */ - csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; - writel(csa, &matrix->csa[0]); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0), - &smc->cs[3].setup); - - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - - writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(2), - &smc->cs[3].mode); - writel((1 << ATMEL_ID_PIOB) | (1 << ATMEL_ID_PIOCDE), - &pmc->pcer); - - /* Configure RDY/BSY */ -#ifdef CONFIG_SYS_NAND_READY_PIN - gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); -#endif - /* Enable NandFlash */ - gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} -#endif - -#ifdef CONFIG_MACB -static void vl_ma2sc_macb_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); - - at91_phy_reset(); - - at91_macb_hw_init(); -} -#endif - -#ifdef CONFIG_LCD -vidinfo_t panel_info = { - .vl_col = 320, - .vl_row = 240, - .vl_clk = 6500000, - .vl_sync = ATMEL_LCDC_INVDVAL_INVERTED | - ATMEL_LCDC_INVLINE_INVERTED | - ATMEL_LCDC_INVVD_INVERTED | - ATMEL_LCDC_INVFRAME_INVERTED, - .vl_bpix = (ATMEL_LCDC_PIXELSIZE_8 >> 5), - .vl_tft = 1, - .vl_hsync_len = 5, /* Horiz Sync Pulse Width */ - .vl_left_margin = 68, /* horiz back porch */ - .vl_right_margin = 20, /* horiz front porch */ - .vl_vsync_len = 2, /* vert Sync Pulse Width */ - .vl_upper_margin = 18, /* vert back porch */ - .vl_lower_margin = 4, /* vert front porch */ - .mmio = ATMEL_BASE_LCDC, -}; - -void lcd_enable(void) -{ -} - -void lcd_disable(void) -{ -} - -static void vl_ma2sc_lcd_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */ - at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */ - - at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD0 */ - at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD1 */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */ - - at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD9 */ - at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */ - at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */ - - at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD26 */ - at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD17 */ - at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */ - at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */ - at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */ - at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */ - at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ - at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ - - at91_set_pio_output(AT91_PIO_PORTE, 0, 0); /* LCD QXH */ - - at91_set_pio_output(AT91_PIO_PORTE, 2, 0); /* LCD SHUT */ - at91_set_pio_output(AT91_PIO_PORTE, 3, 1); /* LCD TopBottom */ - at91_set_pio_output(AT91_PIO_PORTE, 4, 0); /* LCD REV */ - at91_set_pio_output(AT91_PIO_PORTE, 5, 1); /* LCD RightLeft */ - at91_set_pio_output(AT91_PIO_PORTE, 6, 0); /* LCD Color Mode CM */ - at91_set_pio_output(AT91_PIO_PORTE, 7, 0); /* LCD BGR */ - - at91_set_pio_output(AT91_PIO_PORTB, 9, 0); /* LCD CC */ - - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); - gd->fb_base = ATMEL_BASE_SRAM0; -} -#endif /* Config LCD */ - -#ifdef CONFIG_BOARD_EARLY_INIT_F -int board_early_init_f(void) -{ - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOCDE), - &pmc->pcer); - - at91_seriald_hw_init(); - - return 0; -} -#endif - -int board_init(void) -{ - at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - u32 pin; - - pin = 0x1F000001; - writel(pin, &pio->pioa.idr); - writel(pin, &pio->pioa.pudr); - writel(pin, &pio->pioa.per); - writel(pin, &pio->pioa.oer); - writel(pin, &pio->pioa.sodr); - writel((1 << 25), &pio->pioa.codr); - - pin = 0x1F000100; - writel(pin, &pio->piob.idr); - writel(pin, &pio->piob.pudr); - writel(pin, &pio->piob.per); - writel(pin, &pio->piob.oer); - writel(pin, &pio->piob.codr); - writel((1 << 24), &pio->piob.sodr); - - pin = 0x40000000; /* Pullup DRxD enbable */ - writel(pin, &pio->pioc.puer); - - pin = 0x0000000F; /* HWversion als Input */ - writel(pin, &pio->piod.idr); - writel(pin, &pio->piod.puer); - writel(pin, &pio->piod.per); - writel(pin, &pio->piod.odr); - writel(pin, &pio->piod.owdr); - - gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC; - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - writel(CONFIG_SYS_SMC0_MODE0_VAL, &smc->cs[0].setup); - writel(CONFIG_SYS_SMC0_CYCLE0_VAL, &smc->cs[0].cycle); - writel(CONFIG_SYS_SMC0_PULSE0_VAL, &smc->cs[0].pulse); - writel(CONFIG_SYS_SMC0_SETUP0_VAL, &smc->cs[0].setup); - -#ifdef CONFIG_CMD_NAND - vl_ma2sc_nand_hw_init(); -#endif -#ifdef CONFIG_MACB - vl_ma2sc_macb_hw_init(); -#endif -#ifdef CONFIG_USB_OHCI_NEW - at91_uhp_hw_init(); -#endif -#ifdef CONFIG_LCD - vl_ma2sc_lcd_hw_init(); -#endif - return 0; -} - -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) -{ - uchar buffer[8]; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - u32 pin; - - buffer[0] = 0x04; - buffer[1] = 0x00; - if (i2c_write(0x68, 0x0E, 1, buffer, 2) != 0) - puts("error reseting rtc clock\n\0"); - - /* read hardware version */ - - pin = (readl(&pio->piod.pdsr) & 0x0F) + 0x44; - printf("Board: revision %c\n", pin); - buffer[0] = pin; - buffer[1] = 0; - setenv("revision", (char *) buffer); - - pin = 0x40000000; /* Pullup DRxD enbable */ - writel(pin, &pio->pioc.puer); - return 0; -} -#endif - -int dram_init(void) -{ - gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -#ifdef CONFIG_RESET_PHY_R -void reset_phy(void) -{ -#ifdef CONFIG_MACB - /* - * Initialize ethernet HW addr prior to starting Linux, - * needed for nfsroot - */ - eth_init(); -#endif -} -#endif - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *) ATMEL_BASE_EMAC, 0x01); -#endif - return rc; -} - -#ifdef CONFIG_SYS_I2C_SOFT -void i2c_init_board(void) -{ - u32 pin; - - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - u8 sda = (1<<4); - u8 scl = (1<<5); - - writel(1 << ATMEL_ID_PIOB, &pmc->pcer); - pin = sda | scl; - writel(pin, &pio->piob.idr); /* Disable Interupt */ - writel(pin, &pio->piob.pudr); - writel(pin, &pio->piob.per); - writel(pin, &pio->piob.oer); - writel(pin, &pio->piob.sodr); -} -#endif - -void watchdog_reset(void) -{ - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - u32 pin = 0x1; /* PA0 */ - - if ((readl(&pio->pioa.odsr) & pin) > 0) - writel(pin, &pio->pioa.codr); - else - writel(pin, &pio->pioa.sodr); -} - -void enable_caches(void) -{ -#ifndef CONFIG_SYS_DCACHE_OFF - dcache_enable(); -#endif -} - -/*---------------------------------------------------------------------------*/ - -int do_ledtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int rcode = 1; - int row; - int col; - u32 pinz; - u32 pins; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - - at91_set_pio_output(AT91_PIO_PORTB, 8, 0); /* LCD DIM */ - - pins = 0x1F000000; - writel(pins, &pio->pioa.idr); - writel(pins, &pio->pioa.pudr); - writel(pins, &pio->pioa.per); - writel(pins, &pio->pioa.oer); - writel(pins, &pio->pioa.sodr); - - pinz = 0x1F000000; - writel(pinz, &pio->piob.idr); - writel(pinz, &pio->piob.pudr); - writel(pinz, &pio->piob.per); - writel(pinz, &pio->piob.oer); - writel(pinz, &pio->piob.sodr); - - for (row = 0; row < 5; row++) { - for (col = 0; col < 5; col++) { - writel((0x01000000 << col), &pio->piob.sodr); - writel((0x01000000 << row), &pio->pioa.codr); - printf("LED Test %d x %d\n", row, col); - udelay(1000000); - writel(pinz, &pio->piob.codr); - writel(pins, &pio->pioa.sodr); - } - } - return rcode; -} - -void poweroff(void) -{ - watchdog_reset(); - at91_set_pio_output(AT91_PIO_PORTA, 13, 1); /* CAN_TX -> H */ - udelay(100); - at91_set_pio_output(AT91_PIO_PORTA, 12, 0); /* CAN_STB -> L */ - udelay(100); - at91_set_pio_output(AT91_PIO_PORTA, 11, 0); /* CAN_EN -> L */ - udelay(100); - while (1) - watchdog_reset(); -} - -int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int rcode = 1; - poweroff(); - return rcode; -} - -int do_beep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int i; - u32 freq; - u32 durate; - int rcode = 1; - - freq = 1000; - durate = 2; - switch (argc) { - case 3: - durate = simple_strtoul(argv[2], NULL, 10); - case 2: - freq = simple_strtoul(argv[1], NULL, 10); - case 1: - break; - default: - cmd_usage(cmdtp); - rcode = 1; - break; - } - durate = durate * freq; - freq = 500000 / freq; - for (i = 0; i < durate; i++) { - at91_set_pio_output(AT91_PIO_PORTB, 29, 1); /* Sound On*/ - udelay(freq); - at91_set_pio_output(AT91_PIO_PORTB, 29, 0); /* Sound Off*/ - udelay(freq); - } - at91_set_pio_output(AT91_PIO_PORTB, 29, 0); /* Sound Off*/ - return rcode; -} - -int do_keytest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int rcode = 1; - int row; - u32 col; - u32 pinz; - u32 pins; - at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - writel((1 << ATMEL_ID_PIOA), &pmc->pcer); - - pins = 0x001F0000; - writel(pins, &pio->pioa.idr); - writel(pins, &pio->pioa.pudr); - writel(pins, &pio->pioa.per); - writel(pins, &pio->pioa.odr); - - pinz = 0x000F0000; - writel(pinz, &pio->piob.idr); - writel(pinz, &pio->piob.pudr); - writel(pinz, &pio->piob.per); - writel(pinz, &pio->piob.oer); - writel(pinz, &pio->piob.codr); - - while (1) { - col = 0; - for (row = 0; row < 4; row++) { - writel((0x00010000 << row), &pio->piob.sodr); - udelay(10000); - col <<= 4; - col |= ((readl(&pio->pioa.pdsr) >> 16) & 0xF) ^ 0xF ; - writel(pinz, &pio->piob.codr); - } - printf("Matix: "); - for (row = 0; row < 16; row++) { - printf("%1.1d", col & 1); - col >>= 1; - } - printf(" SP %d\r ", - 1 ^ (1 & (readl(&pio->piob.pdsr) >> 20))); - if ((1 & (readl(&pio->pioa.pdsr) >> 1)) == 0) { - /* SHUTDOWN */ - row = 0; - while (row < 1000) { - if ((1 & (readl(&pio->pioa.pdsr) >> 1)) == 0) - row++; - udelay(100); - } - udelay(100000); - row = 0; - while (row < 1000) { - if ((1 & (readl(&pio->pioa.pdsr) >> 1)) > 0) { - row++; - udelay(1000); - } - } - poweroff(); - while (1) - ; - } - } - return rcode; -} - -/*****************************************************************************/ - -U_BOOT_CMD( - ledtest, 1, 0, do_ledtest, - "test ledmatrix", - "\n" - ); - -U_BOOT_CMD( - keytest, 1, 0, do_keytest, - "test keymatix and special keys, poweroff on pressing ON key", - "\n" - ); - -U_BOOT_CMD( - poweroff, 1, 0, do_poweroff, - "power off", - "\n" - ); - -U_BOOT_CMD( - beep, 3, 0, do_beep, - "[freq [duration]]", - "freq frequence of beep\nduration duration of beep\n" - ); - -/*****************************************************************************/ diff --git a/configs/vl_ma2sc_defconfig b/configs/vl_ma2sc_defconfig deleted file mode 100644 index c908c6e7fd..0000000000 --- a/configs/vl_ma2sc_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_VL_MA2SC=y -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="U-Boot> " diff --git a/configs/vl_ma2sc_ram_defconfig b/configs/vl_ma2sc_ram_defconfig deleted file mode 100644 index 43a576f3b2..0000000000 --- a/configs/vl_ma2sc_ram_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_VL_MA2SC=y -CONFIG_SYS_EXTRA_OPTIONS="RAMLOAD" -# CONFIG_CMD_BDI is not set -# CONFIG_CMD_IMI is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/vl_ma2sc.h b/include/configs/vl_ma2sc.h deleted file mode 100644 index 3facd7f257..0000000000 --- a/include/configs/vl_ma2sc.h +++ /dev/null @@ -1,429 +0,0 @@ -/* - * (C) Copyright 2009-2012 - * Jens Scharsig - * BuS Elektronik GmbH & Co. KG - * - * Configuation settings for the VL_MA2SC board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*--------------------------------------------------------------------------*/ - -#define CONFIG_AT91SAM9263 /* It's an Atmel AT91SAM9263 SoC*/ -#define CONFIG_VL_MA2SC /* on an VL_MA2SC Board */ -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_MISC_INIT_R - -#include - -#define MACH_TYPE_VL_MA2SC 2412 -#define CONFIG_MACH_TYPE MACH_TYPE_VL_MA2SC - -#define CONFIG_SYS_DCACHE_OFF - -#ifdef CONFIG_RAMLOAD -#define CONFIG_SYS_TEXT_BASE 0x21000000 -#else -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#endif -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_IDENT_STRING " on MiS Activ 2" -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AT91_GPIO - -#if !defined(CONFIG_SYS_USE_NANDFLASH) && !defined(CONFIG_RAMLOAD) -#define CONFIG_SYS_USE_NORFLASH -#define CONFIG_SYS_USE_BOOT_NORFLASH -#endif - -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#ifndef CONFIG_SYS_USE_BOOT_NORFLASH -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -/* - * Hardware drivers - */ - -#define CONFIG_BOARD_EARLY_INIT_F - -#define CONFIG_WATCHDOG - -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS - -/* LCD */ -#define CONFIG_LCD -#define CONFIG_ATMEL_LCD -#define CONFIG_SPLASH_SCREEN -#define CONFIG_SYS_BLACK_ON_WHITE -#define LCD_BPP LCD_COLOR8 -#define CONFIG_ATMEL_LCD_BGR555 - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_BMP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_NAND -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_MD5SUM -#define CONFIG_CMD_SHA1SUM -/* -#define CONFIG_CMD_SPI -*/ -#define CONFIG_CMD_FAT -#define CONFIG_CMD_USB - -#define CONFIG_SYS_LONGHELP -#define CONFIG_MD5 -#define CONFIG_SHA1 - -/*---------------------------------------------------------------------------- - * Hardware confuguration - *---------------------------------------------------------------------------*/ - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 /* UHP_BASE */ -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE -#define CONFIG_AT91C_PQFP_UHPBUG - -/* I2C-Bus */ - -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0 /* not used */ - -#ifndef CONFIG_HARD_I2C -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED CONFIG_SYS_I2C_SPEED -#define CONFIG_SYS_I2C_SOFT_SLAVE CONFIG_SYS_I2C_SLAVE - -/* Software I2C driver configuration */ -#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SPEED) - -#define AT91_PIN_SDA (1<<4) /* AT91C_PIO_PB4 */ -#define AT91_PIN_SCL (1<<5) /* AT91C_PIO_PB5 */ - -#define I2C_INIT i2c_init_board(); -#define I2C_ACTIVE writel(AT91_PIN_SDA, &pio->piob.mddr); -#define I2C_TRISTATE writel(AT91_PIN_SDA, &pio->piob.mder); -#define I2C_READ ((readl(&pio->piob.pdsr) & AT91_PIN_SDA) != 0) -#define I2C_SDA(bit) \ - do { \ - if (bit) \ - writel(AT91_PIN_SDA, &pio->piob.sodr); \ - else \ - writel(AT91_PIN_SDA, &pio->piob.codr); \ - } while (0); -#define I2C_SCL(bit) \ - do { \ - if (bit) \ - writel(AT91_PIN_SCL, &pio->piob.sodr); \ - else \ - writel(AT91_PIN_SCL, &pio->piob.codr); \ - } while (0); -#endif - -/* I2C-RTC */ - -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_DS1338 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#endif - -/* EEPROM */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 - -/* define PDC[31:16] as DATA[31:16] */ -#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000 -#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000 - -/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */ -#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \ - (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \ - AT91_MATRIX_CSA_EBI_CS1A) - -/* user reset enable */ -#define CONFIG_SYS_RSTC_RMR_VAL \ - (AT91_RSTC_KEY | \ - AT91_RSTC_MR_URSTEN | \ - AT91_RSTC_MR_ERSTL(15)) - -/* Disable Watchdog */ -#define CONFIG_SYS_WDTC_WDMR_VAL \ - (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \ - AT91_WDT_MR_WDV(0xFFF) | \ - AT91_WDT_MR_WDDIS | \ - AT91_WDT_MR_WDD(0xFFF)) - -/* clocks */ - -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define MHZ180 -#if defined(MHZ199) -/* 199,8994 MHZ */ -#define MASTER_PLL_MUL 911 -#define MASTER_PLL_DIV 56 -#define MASTER_PLL_OUT 2 -#elif defined(MHZ180) -/* 180 MHZ */ -#define MASTER_PLL_MUL 1875 -#define MASTER_PLL_DIV 128 -#define MASTER_PLL_OUT 2 -#elif defined(MHZTEST) -/* Test MHZ */ -#define CONFIG_DISPLAY_CPUINFO -#define MASTER_PLL_MUL 8 -#define MASTER_PLL_DIV 1 -#define MASTER_PLL_OUT 2 -#else -/* 176.9472 MHZ */ -#define MASTER_PLL_MUL 72 -#define MASTER_PLL_DIV 5 -#define MASTER_PLL_OUT 2 -#endif - -#define CONFIG_SYS_MOR_VAL \ - (AT91_PMC_MOR_MOSCEN | AT91_PMC_MOR_OSCOUNT(255)) - -#define CONFIG_SYS_PLLAR_VAL \ - (AT91_PMC_PLLAR_29 | \ - AT91_PMC_PLLXR_OUT(MASTER_PLL_OUT) | \ - AT91_PMC_PLLXR_PLLCOUNT(63) | \ - AT91_PMC_PLLXR_MUL(MASTER_PLL_MUL - 1) | \ - AT91_PMC_PLLXR_DIV(MASTER_PLL_DIV)) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR1_VAL \ - (AT91_PMC_MCKR_CSS_SLOW | AT91_PMC_MCKR_PRES_1 | \ - AT91_PMC_MCKR_MDIV_2) - -/* PCK/2 = MCK Master Clock from PLLA */ -#define CONFIG_SYS_MCKR2_VAL \ - (AT91_PMC_MCKR_CSS_PLLA | AT91_PMC_MCKR_PRES_1 | \ - AT91_PMC_MCKR_MDIV_2) - -/* SDRAM */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ -#define CONFIG_SYS_INIT_SP_ADDR 0x00504000 /* use internal SRAM0 */ - -#define CONFIG_SYS_SDRC_MR_VAL1 0 -#define CONFIG_SYS_SDRC_TR_VAL1 700 -#define CONFIG_SYS_SDRC_CR_VAL \ - (AT91_SDRAMC_NC_9 | \ - AT91_SDRAMC_NR_13 | \ - AT91_SDRAMC_NB_4 | \ - AT91_SDRAMC_CAS_3 | \ - AT91_SDRAMC_DBW_32 | \ - (2 << 8) | /* Write Recovery Delay */ \ - (7 << 12) | /* Row Cycle Delay */ \ - (2 << 16) | /* Row Precharge Delay */ \ - (2 << 20) | /* Row to Column Delay */ \ - (5 << 24) | /* Active to Precharge Delay */ \ - (8 << 28)) /* Exit Self Refresh to Active Delay */ - -#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM -#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE -#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH -#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR -#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL -#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ -#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ -#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ - -/* NOR flash */ - -#define CONFIG_FLASH_SHOW_PROGRESS 45 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define PHYS_FLASH_1 0x10000000 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) - -/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */ -#define CONFIG_SYS_SMC0_SETUP0_VAL \ - (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \ - AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10)) -#define CONFIG_SYS_SMC0_PULSE0_VAL \ - (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \ - AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11)) -#define CONFIG_SYS_SMC0_CYCLE0_VAL \ - (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22)) -#define CONFIG_SYS_SMC0_MODE0_VAL \ - (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \ - AT91_SMC_MODE_DBW_16 | \ - AT91_SMC_MODE_TDF | AT91_SMC_MODE_TDF_CYCLE(6)) - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_NAND_ATMEL -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 -#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* our CLE is AD22 */ -#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) -#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PB(0) -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_NET_RETRY_COUNT 5 -#define CONFIG_AT91_WANTS_COMMON_PHY - -#define CONFIG_OVERWRITE_ETHADDR_ONCE - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END 0x21e00000 - -/* Address and size of Primary Environment Sector */ -#ifdef CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 0x20000 -#else -#define CONFIG_ENV_SIZE 0x2000 -#endif - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {312500, 230400, 115200, 19200, \ - 38400, 57600, 9600 } - -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN \ - ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) - -#ifndef CONFIG_RAMLOAD -#define CONFIG_BOOTCOMMAND "run nfsboot" -#endif -#define CONFIG_BOOT_RETRY_TIME -1 -#define CONFIG_BOOT_RETRY_MIN 15 - -#define CONFIG_NFSBOOTCOMMAND \ - "dhcp $(copy_addr) $(kernelname);" \ - "run bootargsdefaults;" \ - "set bootargs $(bootargs) boot=nfs " \ - ";echo $(bootargs)" \ - ";bootm" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ubootaddr=10000000\0" \ - "splashimage=10080000\0" \ - "kerneladdr=100A0000\0" \ - "kernelsize=00800000\0" \ - "minifsaddr=108A0000\0" \ - "minifssize=00060000\0" \ - "rootfsaddr=10900000\0" \ - "copy_addr=20200000\0" \ - "rootfssize=01700000\0" \ - "kernelname=uImage_vl_ma2sc\0" \ - "bootargsdefaults=set bootargs " \ - "console=ttyS0,115200 " \ - "video=atmel_lcdfb " \ - "mem=62M " \ - "panic=10 " \ - "boardrevison=\\\"${revision}\\\" " \ - "uboot=\\\"${ver}\\\" " \ - "\0" \ - "update_all=run update_kernel;run update_root;" \ - "run update_splash; run update_uboot\0" \ - "update_kernel=protect off $(kerneladdr) +$(kernelsize);" \ - "dhcp $(copy_addr) $(kernelname);" \ - "erase $(kerneladdr) +$(kernelsize);" \ - "cp.b $(fileaddr) $(kerneladdr) $(filesize);" \ - "protect on $(kerneladdr) +$(kernelsize)" \ - "\0" \ - "update_root=protect off $(rootfsaddr) +$(rootfssize);" \ - "dhcp $(copy_addr) vl_ma2sc.root;" \ - "erase $(rootfsaddr) +$(rootfssize);" \ - "cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \ - "\0" \ - "update_splash=protect off $(splashimage) +20000;" \ - "dhcp $(copy_addr) splash_vl_ma2sc.bmp;" \ - "erase $(splashimage) +20000;" \ - "cp.b $(fileaddr) 10080000 $(filesize);" \ - "protect on $(splashimage) +20000\0" \ - "update_uboot=protect off 10000000 1005FFFF;" \ - "dhcp $(copy_addr) u-boot_vl_ma2sc;" \ - "erase 10000000 1005FFFF;" \ - "cp.b $(fileaddr) $(ubootaddr) $(filesize);" \ - "protect on 10000000 1005FFFF;reset\0" \ - "emergency=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=emergency " \ - ";bootm $(kerneladdr)\0" \ - "netemergency=run bootargsdefaults;" \ - "dhcp $(copy_addr) $(kernelname);" \ - "set bootargs $(bootargs) root=initramfs boot=emergency " \ - ";bootm $(copy_addr)\0" \ - "norboot=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=local quiet " \ - ";bootm $(kerneladdr)\0" \ - "nandboot=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=nand " \ - ";bootm $(kerneladdr)\0" \ - "setnorboot=set bootcmd 'run norboot'; set bootdelay 1;save\0" \ - "clearenv=protect off 10060000 1007FFFF;" \ - "erase 10060000 1007FFFF;reset\0" \ - " " - -#endif