From: Anton Gerasimov Date: Sat, 24 Mar 2018 17:31:59 +0000 (+0100) Subject: ARM: dts: zynq: Update dts for Z-turn board X-Git-Tag: v2018.05-rc2~44^2~50 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=6fb7b756732054dc3972ced06dac2bddc11dfeb9;p=u-boot ARM: dts: zynq: Update dts for Z-turn board Delete devices implemented in PL, stylistic changes. Signed-off-by: Anton Gerasimov Signed-off-by: Michal Simek --- diff --git a/arch/arm/dts/zynq-zturn-myir.dts b/arch/arm/dts/zynq-zturn-myir.dts index a5ecfcc1d7..8aa384b59b 100644 --- a/arch/arm/dts/zynq-zturn-myir.dts +++ b/arch/arm/dts/zynq-zturn-myir.dts @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Copyright (C) 2015 Andrea Merello * Copyright (C) 2017 Alexander Graf @@ -6,31 +7,23 @@ * Copyright (C) 2011 - 2014 Xilinx * Copyright (C) 2012 National Instruments Corp. * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ + /dts-v1/; /include/ "zynq-7000.dtsi" / { model = "Zynq Z-Turn MYIR Board"; - compatible = "xlnx,zynq-7000"; + compatible = "myir,zynq-zturn", "xlnx,zynq-7000"; aliases { ethernet0 = &gem0; serial0 = &uart1; serial1 = &uart0; - spi0 = &qspi; mmc0 = &sdhci0; }; - memory { + memory@0 { device_type = "memory"; reg = <0x0 0x40000000>; }; @@ -41,52 +34,23 @@ gpio-leds { compatible = "gpio-leds"; - led_r { - label = "led_r"; - gpios = <&gpio0 0x72 0x1>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led_g { - label = "led_g"; - gpios = <&gpio0 0x73 0x1>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led_b { - label = "led_b"; - gpios = <&gpio0 0x74 0x1>; - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - usr_led1 { - label = "usr_led1"; + usr-led1 { + label = "usr-led1"; gpios = <&gpio0 0x0 0x1>; default-state = "off"; - linux,default-trigger = "none"; }; - usr_led2 { - label = "usr_led2"; + usr-led2 { + label = "usr-led2"; gpios = <&gpio0 0x9 0x1>; default-state = "off"; - linux,default-trigger = "none"; }; }; - gpio-beep { - compatible = "gpio-beeper"; - label = "pl-beep"; - gpios = <&gpio0 0x75 0x0>; - }; - gpio-keys { compatible = "gpio-keys"; - #address-cells = <0x1>; - #size-cells = <0x0>; + #address-cells = <1>; + #size-cells = <0>; autorepeat; K1 { label = "K1"; @@ -100,7 +64,6 @@ &clkc { ps-clk-frequency = <33333333>; - fclk-enable = <0xf>; }; &qspi { @@ -152,8 +115,8 @@ reg = <0x49>; }; - adxl345@53 { - compatible = "adi,adxl34x", "adxl34x"; + accelerometer@53 { + compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x"; reg = <0x53>; interrupt-parent = <&intc>; interrupts = <0x0 0x1e 0x4>;