From: Przemyslaw Marczak Date: Tue, 31 Mar 2015 16:57:17 +0000 (+0200) Subject: Kconfig: i2c: fix help message related to dm i2c X-Git-Tag: v2015.07-rc1~270 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=705fcf4de40383a47dc92c4c9d7dbeb37a9d1104;p=u-boot Kconfig: i2c: fix help message related to dm i2c Signed-off-by: Przemyslaw Marczak Acked-by: Simon Glass --- diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 692810d057..c83a98459a 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -2,16 +2,13 @@ config DM_I2C bool "Enable Driver Model for I2C drivers" depends on DM help - Enable driver model for I2C. This SPI flash interface - (spi_flash_probe(), spi_flash_write(), etc.) is then - implemented by the SPI flash uclass. There is one standard - SPI flash driver which knows how to probe most chips - supported by U-Boot. The uclass interface is defined in - include/spi_flash.h, but is currently fully compatible - with the old interface to avoid confusion and duplication - during the transition parent. SPI and SPI flash must be - enabled together (it is not possible to use driver model - for one and not the other). + Enable driver model for I2C. The I2C uclass interface: probe, read, + write and speed, is implemented with the bus drivers operations, + which provide methods for bus setting and data transfer. Each chip + device (bus child) info is kept as parent platdata. The interface + is defined in include/i2c.h. When i2c bus driver supports the i2c + uclass, but the device drivers not, then DM_I2C_COMPAT config can + be used as compatibility layer. config DM_I2C_COMPAT bool "Enable I2C compatibility layer"