From: Rupjyoti Sarmah Date: Fri, 1 Oct 2010 09:01:28 +0000 (+0530) Subject: ppc44x: config GPIOs for USB on canyonlands board X-Git-Tag: v2010.12-rc1~170^2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=709d9481e99f9f42625a48d0517a8877382995a3;p=u-boot ppc44x: config GPIOs for USB on canyonlands board The GPIO 16 and 19 reconfiguration should be done once USB is initialized. So moved the reconfiguration to the USB init function. Signed-off-by: Rupjyoti Sarmah Signed-off-by: Stefan Roese --- diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index a30d4f45ff..faa3720df3 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -195,16 +195,6 @@ int board_early_init_f(void) mtdcr(AHB_TOP, 0x8000004B); mtdcr(AHB_BOT, 0x8000004B); - if (pvr_460ex()) { - /* - * Configure USB-STP pins as alternate and not GPIO - * It seems to be neccessary to configure the STP pins as GPIO - * input at powerup (perhaps while USB reset is asserted). So - * we configure those pins to their "real" function now. - */ - gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); - } #endif return 0; @@ -222,6 +212,15 @@ int usb_board_init(void) val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST); out_8(&bcsr_data->usb_ctrl, val); + /* + * Configure USB-STP pins as alternate and not GPIO + * It seems to be neccessary to configure the STP pins as GPIO + * input at powerup (perhaps while USB reset is asserted). So + * we configure those pins to their "real" function now. + */ + gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1); + return 0; } @@ -236,6 +235,10 @@ int usb_board_stop(void) val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST); out_8(&bcsr_data->usb_ctrl, val); + /* Reconfigure USB-STP pins as input */ + gpio_config(16, GPIO_IN , GPIO_SEL, GPIO_OUT_0); + gpio_config(19, GPIO_IN , GPIO_SEL, GPIO_OUT_0); + return 0; }