From: Wolfgang Denk Date: Sat, 16 May 2009 08:47:41 +0000 (+0200) Subject: Rename ads5121 board into mpc5121ads X-Git-Tag: v2009.08-rc1~153^2~47 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=72601d04fdfdd4c7597afcf1f6aab654bd99366c;p=u-boot Rename ads5121 board into mpc5121ads We rename the board so we use a consistent name in U-Boot and in Linux. Also, we use this opportunity to move the board into the Freecale vendor directory. Signed-off-by: Wolfgang Denk Cc: John Rigby --- diff --git a/MAKEALL b/MAKEALL index c98d03a579..0e5f31531c 100755 --- a/MAKEALL +++ b/MAKEALL @@ -77,7 +77,7 @@ LIST_5xxx=" \ ######################################################################### LIST_512x=" \ - ads5121 \ + mpc5121ads \ " ######################################################################### diff --git a/Makefile b/Makefile index 4445b4b6a3..a43617e8ec 100644 --- a/Makefile +++ b/Makefile @@ -821,14 +821,14 @@ v38b_config: unconfig ## MPC512x Systems ######################################################################### -ads5121_config \ -ads5121_rev2_config \ +mpc5121ads_config \ +mpc5121ads_rev2_config \ : unconfig @mkdir -p $(obj)include @if [ "$(findstring rev2,$@)" ] ; then \ echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ fi - @$(MKCONFIG) -a ads5121 ppc mpc512x ads5121 + @$(MKCONFIG) -a mpc5121ads ppc mpc512x mpc5121ads freescale ######################################################################### diff --git a/board/ads5121/Makefile b/board/ads5121/Makefile deleted file mode 100644 index 20fbf6e9ae..0000000000 --- a/board/ads5121/Makefile +++ /dev/null @@ -1,53 +0,0 @@ -# -# (C) Copyright 2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -$(shell mkdir -p $(OBJTREE)/board/freescale/common) - -LIB = $(obj)lib$(BOARD).a - -COBJS-y := $(BOARD).o - -COBJS := $(COBJS-y) -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/ads5121/README b/board/ads5121/README deleted file mode 100644 index defcd6b469..0000000000 --- a/board/ads5121/README +++ /dev/null @@ -1,7 +0,0 @@ -To configure for the current (Rev 3.x) ADS5121 - make ads5121_config -This will automatically include PCI, the Real Time CLock, add backup flash -ability and set the correct frequency and memory configuration. - -To configure for the older Rev 2 ADS5121 type (this will not have PCI) - make ads5121_rev2_config diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c deleted file mode 100644 index 405432c527..0000000000 --- a/board/ads5121/ads5121.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * (C) Copyright 2007 DENX Software Engineering - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_MISC_INIT_R -#include -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* Clocks in use */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_PATA_EN | \ - CLOCK_SCCR1_PCI_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) - -#define CSAW_START(start) ((start) & 0xFFFF0000) -#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) - -long int fixed_sdram(void); - -int board_early_init_f (void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 lpcaw; - - /* - * Initialize Local Window for the CPLD registers access (CS2 selects - * the CPLD chip) - */ - im->sysconf.lpcs2aw = CSAW_START(CONFIG_SYS_CPLD_BASE) | - CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE); - im->lpc.cs_cfg[2] = CONFIG_SYS_CS2_CFG; - - /* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync - */ - lpcaw = im->sysconf.lpcs2aw; - __asm__ __volatile__ ("isync"); - - /* - * Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control - * - * Without this the flash identification routine fails, as it needs to issue - * write commands in order to establish the device ID. - */ - -#ifdef CONFIG_ADS5121_REV2 - *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1; -#else - if (*((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) { - *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1; - } else { - /* running from Backup flash */ - *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0x32; - } -#endif - /* - * Configure Flash Speed - */ - *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS0_CONFIG)) = CONFIG_SYS_CS0_CFG; - if (SVR_MJREV (im->sysconf.spridr) >= 2) { - *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CONFIG_SYS_CS_ALETIMING; - } - /* - * Enable clocks - */ - im->clk.sccr[0] = SCCR1_CLOCKS_EN; - im->clk.sccr[1] = SCCR2_CLOCKS_EN; -#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE) - im->clk.sccr[1] |= CLOCK_SCCR2_IIM_EN; -#endif - - return 0; -} - -phys_size_t initdram (int board_type) -{ - u32 msize = 0; - - msize = fixed_sdram (); - - return msize; -} - -/* - * fixed sdram init -- the board doesn't use memory modules that have serial presence - * detect or similar mechanism for discovery of the DRAM settings - */ -long int fixed_sdram (void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; - u32 msize_log2 = __ilog2 (msize); - u32 i; - - /* Initialize IO Control */ - im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR; - - /* Initialize DDR Local Window */ - im->sysconf.ddrlaw.bar = CONFIG_SYS_DDR_BASE & 0xFFFFF000; - im->sysconf.ddrlaw.ar = msize_log2 - 1; - - /* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync - */ - i = im->sysconf.ddrlaw.ar; - __asm__ __volatile__ ("isync"); - - /* Enable DDR */ - im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_EN; - - /* Initialize DDR Priority Manager */ - im->mddrc.prioman_config1 = CONFIG_SYS_MDDRCGRP_PM_CFG1; - im->mddrc.prioman_config2 = CONFIG_SYS_MDDRCGRP_PM_CFG2; - im->mddrc.hiprio_config = CONFIG_SYS_MDDRCGRP_HIPRIO_CFG; - im->mddrc.lut_table0_main_upper = CONFIG_SYS_MDDRCGRP_LUT0_MU; - im->mddrc.lut_table0_main_lower = CONFIG_SYS_MDDRCGRP_LUT0_ML; - im->mddrc.lut_table1_main_upper = CONFIG_SYS_MDDRCGRP_LUT1_MU; - im->mddrc.lut_table1_main_lower = CONFIG_SYS_MDDRCGRP_LUT1_ML; - im->mddrc.lut_table2_main_upper = CONFIG_SYS_MDDRCGRP_LUT2_MU; - im->mddrc.lut_table2_main_lower = CONFIG_SYS_MDDRCGRP_LUT2_ML; - im->mddrc.lut_table3_main_upper = CONFIG_SYS_MDDRCGRP_LUT3_MU; - im->mddrc.lut_table3_main_lower = CONFIG_SYS_MDDRCGRP_LUT3_ML; - im->mddrc.lut_table4_main_upper = CONFIG_SYS_MDDRCGRP_LUT4_MU; - im->mddrc.lut_table4_main_lower = CONFIG_SYS_MDDRCGRP_LUT4_ML; - im->mddrc.lut_table0_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT0_AU; - im->mddrc.lut_table0_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT0_AL; - im->mddrc.lut_table1_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT1_AU; - im->mddrc.lut_table1_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT1_AL; - im->mddrc.lut_table2_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT2_AU; - im->mddrc.lut_table2_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT2_AL; - im->mddrc.lut_table3_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT3_AU; - im->mddrc.lut_table3_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT3_AL; - im->mddrc.lut_table4_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT4_AU; - im->mddrc.lut_table4_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT4_AL; - - /* Initialize MDDRC */ - im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG; - im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0; - im->mddrc.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1; - im->mddrc.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2; - - /* Initialize DDR */ - for (i = 0; i < 10; i++) - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM3; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EN_DLL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_OCD_DEFAULT; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - - /* Start MDDRC */ - im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0_RUN; - im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_RUN; - - return msize; -} - -int misc_init_r(void) -{ - u8 tmp_val; - extern int mpc5121_diu_init(void); - - /* Using this for DIU init before the driver in linux takes over - * Enable the TFP410 Encoder (I2C address 0x38) - */ - - i2c_set_bus_num(2); - tmp_val = 0xBF; - i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val)); - /* Verify if enabled */ - tmp_val = 0; - i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val)); - debug("DVI Encoder Read: 0x%02lx\n", tmp_val); - - tmp_val = 0x10; - i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val)); - /* Verify if enabled */ - tmp_val = 0; - i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val)); - debug("DVI Encoder Read: 0x%02lx\n", tmp_val); - -#ifdef CONFIG_FSL_DIU_FB -#if !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)) - mpc5121_diu_init(); -#endif -#endif - - return 0; -} -static iopin_t ioregs_init[] = { - /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */ - { - IOCTL_SPDIF_TXCLK, 3, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* Set highest Slew on 9 PATA pins */ - { - IOCTL_PATA_CE1, 9, 1, - IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC1=FEC_COL Sets Next 15 to FEC pads */ - { - IOCTL_PSC0_0, 15, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC1=SPDIF_TXCLK */ - { - IOCTL_LPC_CS1, 1, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) - }, - /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */ - { - IOCTL_I2C1_SCL, 2, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) - }, - /* FUNC2=DIU CLK */ - { - IOCTL_PSC6_0, 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) - }, - /* FUNC2=DIU_HSYNC */ - { - IOCTL_PSC6_1, 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */ - { - IOCTL_PSC6_4, 26, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - } -}; - -static iopin_t rev2_silicon_pci_ioregs_init[] = { - /* FUNC0=PCI Sets next 54 to PCI pads */ - { - IOCTL_PCI_AD31, 54, 0, - IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0) - } -}; - -int checkboard (void) -{ - ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00); - uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02); - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - - printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n", - brd_rev, cpld_rev); - /* initialize function mux & slew rate IO inter alia on IO Pins */ - - iopin_initialize(ioregs_init, sizeof(ioregs_init) / sizeof(ioregs_init[0])); - if (SVR_MJREV (im->sysconf.spridr) >= 2) { - iopin_initialize(rev2_silicon_pci_ioregs_init, 1); - } - - return 0; -} - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -void ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/ads5121/config.mk b/board/ads5121/config.mk deleted file mode 100644 index 14998f4750..0000000000 --- a/board/ads5121/config.mk +++ /dev/null @@ -1,23 +0,0 @@ -# -# (C) Copyright 2007 DENX Software Engineering -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -TEXT_BASE = 0xFFF00000 diff --git a/board/freescale/mpc5121ads/Makefile b/board/freescale/mpc5121ads/Makefile new file mode 100644 index 0000000000..20fbf6e9ae --- /dev/null +++ b/board/freescale/mpc5121ads/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +$(shell mkdir -p $(OBJTREE)/board/freescale/common) + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := $(BOARD).o + +COBJS := $(COBJS-y) +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mpc5121ads/README b/board/freescale/mpc5121ads/README new file mode 100644 index 0000000000..defcd6b469 --- /dev/null +++ b/board/freescale/mpc5121ads/README @@ -0,0 +1,7 @@ +To configure for the current (Rev 3.x) ADS5121 + make ads5121_config +This will automatically include PCI, the Real Time CLock, add backup flash +ability and set the correct frequency and memory configuration. + +To configure for the older Rev 2 ADS5121 type (this will not have PCI) + make ads5121_rev2_config diff --git a/board/freescale/mpc5121ads/config.mk b/board/freescale/mpc5121ads/config.mk new file mode 100644 index 0000000000..14998f4750 --- /dev/null +++ b/board/freescale/mpc5121ads/config.mk @@ -0,0 +1,23 @@ +# +# (C) Copyright 2007 DENX Software Engineering +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFF00000 diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c new file mode 100644 index 0000000000..e8eb491e3b --- /dev/null +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -0,0 +1,332 @@ +/* + * (C) Copyright 2007 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_MISC_INIT_R +#include +#endif + +DECLARE_GLOBAL_DATA_PTR; + +extern int mpc5121_diu_init(void); + +/* Clocks in use */ +#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ + CLOCK_SCCR1_LPC_EN | \ + CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ + CLOCK_SCCR1_PSCFIFO_EN | \ + CLOCK_SCCR1_DDR_EN | \ + CLOCK_SCCR1_FEC_EN | \ + CLOCK_SCCR1_PATA_EN | \ + CLOCK_SCCR1_PCI_EN | \ + CLOCK_SCCR1_TPR_EN) + +#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ + CLOCK_SCCR2_SPDIF_EN | \ + CLOCK_SCCR2_DIU_EN | \ + CLOCK_SCCR2_I2C_EN) + +#define CSAW_START(start) ((start) & 0xFFFF0000) +#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) + +long int fixed_sdram(void); + +int board_early_init_f (void) +{ + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + u32 lpcaw; + + /* + * Initialize Local Window for the CPLD registers access (CS2 selects + * the CPLD chip) + */ + im->sysconf.lpcs2aw = CSAW_START(CONFIG_SYS_CPLD_BASE) | + CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE); + im->lpc.cs_cfg[2] = CONFIG_SYS_CS2_CFG; + + /* + * According to MPC5121e RM, configuring local access windows should + * be followed by a dummy read of the config register that was + * modified last and an isync + */ + lpcaw = im->sysconf.lpcs2aw; + __asm__ __volatile__ ("isync"); + + /* + * Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control + * + * Without this the flash identification routine fails, as it needs to issue + * write commands in order to establish the device ID. + */ + +#ifdef CONFIG_ADS5121_REV2 + *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1; +#else + if (*((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) { + *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1; + } else { + /* running from Backup flash */ + *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0x32; + } +#endif + /* + * Configure Flash Speed + */ + *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS0_CONFIG)) = CONFIG_SYS_CS0_CFG; + if (SVR_MJREV (im->sysconf.spridr) >= 2) { + *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CONFIG_SYS_CS_ALETIMING; + } + /* + * Enable clocks + */ + im->clk.sccr[0] = SCCR1_CLOCKS_EN; + im->clk.sccr[1] = SCCR2_CLOCKS_EN; +#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE) + im->clk.sccr[1] |= CLOCK_SCCR2_IIM_EN; +#endif + + return 0; +} + +phys_size_t initdram (int board_type) +{ + u32 msize = 0; + + msize = fixed_sdram (); + + return msize; +} + +/* + * fixed sdram init -- the board doesn't use memory modules that have serial presence + * detect or similar mechanism for discovery of the DRAM settings + */ +long int fixed_sdram (void) +{ + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024; + u32 msize_log2 = __ilog2 (msize); + u32 i; + + /* Initialize IO Control */ + im->io_ctrl.regs[IOCTL_MEM/4] = IOCTRL_MUX_DDR; + + /* Initialize DDR Local Window */ + im->sysconf.ddrlaw.bar = CONFIG_SYS_DDR_BASE & 0xFFFFF000; + im->sysconf.ddrlaw.ar = msize_log2 - 1; + + /* + * According to MPC5121e RM, configuring local access windows should + * be followed by a dummy read of the config register that was + * modified last and an isync + */ + i = im->sysconf.ddrlaw.ar; + __asm__ __volatile__ ("isync"); + + /* Enable DDR */ + im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_EN; + + /* Initialize DDR Priority Manager */ + im->mddrc.prioman_config1 = CONFIG_SYS_MDDRCGRP_PM_CFG1; + im->mddrc.prioman_config2 = CONFIG_SYS_MDDRCGRP_PM_CFG2; + im->mddrc.hiprio_config = CONFIG_SYS_MDDRCGRP_HIPRIO_CFG; + im->mddrc.lut_table0_main_upper = CONFIG_SYS_MDDRCGRP_LUT0_MU; + im->mddrc.lut_table0_main_lower = CONFIG_SYS_MDDRCGRP_LUT0_ML; + im->mddrc.lut_table1_main_upper = CONFIG_SYS_MDDRCGRP_LUT1_MU; + im->mddrc.lut_table1_main_lower = CONFIG_SYS_MDDRCGRP_LUT1_ML; + im->mddrc.lut_table2_main_upper = CONFIG_SYS_MDDRCGRP_LUT2_MU; + im->mddrc.lut_table2_main_lower = CONFIG_SYS_MDDRCGRP_LUT2_ML; + im->mddrc.lut_table3_main_upper = CONFIG_SYS_MDDRCGRP_LUT3_MU; + im->mddrc.lut_table3_main_lower = CONFIG_SYS_MDDRCGRP_LUT3_ML; + im->mddrc.lut_table4_main_upper = CONFIG_SYS_MDDRCGRP_LUT4_MU; + im->mddrc.lut_table4_main_lower = CONFIG_SYS_MDDRCGRP_LUT4_ML; + im->mddrc.lut_table0_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT0_AU; + im->mddrc.lut_table0_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT0_AL; + im->mddrc.lut_table1_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT1_AU; + im->mddrc.lut_table1_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT1_AL; + im->mddrc.lut_table2_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT2_AU; + im->mddrc.lut_table2_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT2_AL; + im->mddrc.lut_table3_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT3_AU; + im->mddrc.lut_table3_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT3_AL; + im->mddrc.lut_table4_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT4_AU; + im->mddrc.lut_table4_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT4_AL; + + /* Initialize MDDRC */ + im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG; + im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0; + im->mddrc.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1; + im->mddrc.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2; + + /* Initialize DDR */ + for (i = 0; i < 10; i++) + im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; + + im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM3; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_EN_DLL; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_OCD_DEFAULT; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; + im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; + + /* Start MDDRC */ + im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0_RUN; + im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_RUN; + + return msize; +} + +int misc_init_r(void) +{ + u8 tmp_val; + + /* Using this for DIU init before the driver in linux takes over + * Enable the TFP410 Encoder (I2C address 0x38) + */ + + i2c_set_bus_num(2); + tmp_val = 0xBF; + i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val)); + /* Verify if enabled */ + tmp_val = 0; + i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val)); + debug("DVI Encoder Read: 0x%02lx\n", tmp_val); + + tmp_val = 0x10; + i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val)); + /* Verify if enabled */ + tmp_val = 0; + i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val)); + debug("DVI Encoder Read: 0x%02lx\n", tmp_val); + +#ifdef CONFIG_FSL_DIU_FB +# if !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)) + mpc5121_diu_init(); +# endif +#endif + return 0; +} + +static iopin_t ioregs_init[] = { + /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */ + { + IOCTL_SPDIF_TXCLK, 3, 0, + IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) + }, + /* Set highest Slew on 9 PATA pins */ + { + IOCTL_PATA_CE1, 9, 1, + IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) + }, + /* FUNC1=FEC_COL Sets Next 15 to FEC pads */ + { + IOCTL_PSC0_0, 15, 0, + IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) + }, + /* FUNC1=SPDIF_TXCLK */ + { + IOCTL_LPC_CS1, 1, 0, + IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) + }, + /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */ + { + IOCTL_I2C1_SCL, 2, 0, + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) + }, + /* FUNC2=DIU CLK */ + { + IOCTL_PSC6_0, 1, 0, + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) + }, + /* FUNC2=DIU_HSYNC */ + { + IOCTL_PSC6_1, 1, 0, + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) + }, + /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */ + { + IOCTL_PSC6_4, 26, 0, + IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | + IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) + } +}; + +static iopin_t rev2_silicon_pci_ioregs_init[] = { + /* FUNC0=PCI Sets next 54 to PCI pads */ + { + IOCTL_PCI_AD31, 54, 0, + IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0) + } +}; + +int checkboard (void) +{ + ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00); + uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02); + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + + printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n", + brd_rev, cpld_rev); + + /* initialize function mux & slew rate IO inter alia on IO Pins */ + iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init)); + + if (SVR_MJREV (im->sysconf.spridr) >= 2) + iopin_initialize(rev2_silicon_pci_ioregs_init, 1); + + return 0; +} + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h deleted file mode 100644 index b1420fa888..0000000000 --- a/include/configs/ads5121.h +++ /dev/null @@ -1,550 +0,0 @@ -/* - * (C) Copyright 2007, 2008 DENX Software Engineering - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* - * ADS5121 board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_ADS5121 1 -/* - * Memory map for the ADS5121 board: - * - * 0x0000_0000 - 0x0FFF_FFFF DDR RAM (256 MB) - * 0x3000_0000 - 0x3001_FFFF SRAM (128 KB) - * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) - * 0x8200_0000 - 0x8200_001F CPLD (32 B) - * 0x8400_0000 - 0x82FF_FFFF PCI I/O space (16 MB) - * 0xA000_0000 - 0xAFFF_FFFF PCI memory space (256 MB) - * 0xB000_0000 - 0xBFFF_FFFF PCI memory mapped I/O space (256 MB) - * 0xFC00_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB) - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_MPC512X 1 /* MPC512X family */ -#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ -#undef CONFIG_FSL_DIU_LOGO_BMP /* Don't include FSL DIU binary bmp */ - -/* video */ -#undef CONFIG_VIDEO - -#if defined(CONFIG_VIDEO) -#define CONFIG_CFB_CONSOLE -#define CONFIG_VGA_AS_SINGLE_DEVICE -#endif - -/* CONFIG_PCI is defined at config time */ - -#ifdef CONFIG_ADS5121_REV2 -#define CONFIG_SYS_MPC512X_CLKIN 66000000 /* in Hz */ -#else -#define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ -#define CONFIG_PCI -#endif - -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100) - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * DDR Setup - manually set all parameters as there's no SPD etc. - */ -#ifdef CONFIG_ADS5121_REV2 -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#else -#define CONFIG_SYS_DDR_SIZE 512 /* MB */ -#endif -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE - -/* DDR Controller Configuration - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Ready Delay: 2 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Disabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ -#ifdef CONFIG_ADS5121_REV2 -#define CONFIG_SYS_MDDRC_SYS_CFG 0xF8604A00 -#define CONFIG_SYS_MDDRC_SYS_CFG_RUN 0xE8604A00 -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x54EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x35210864 -#else -#define CONFIG_SYS_MDDRC_SYS_CFG 0xFA804A00 -#define CONFIG_SYS_MDDRC_SYS_CFG_RUN 0xEA804A00 -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x68EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34310864 -#endif -#define CONFIG_SYS_MDDRC_SYS_CFG_EN 0xF0000000 -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x00003D2E -#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x06183D2E - -#define CONFIG_SYS_MICRON_NOP 0x01380000 -#define CONFIG_SYS_MICRON_PCHG_ALL 0x01100400 -#define CONFIG_SYS_MICRON_EM2 0x01020000 -#define CONFIG_SYS_MICRON_EM3 0x01030000 -#define CONFIG_SYS_MICRON_EN_DLL 0x01010000 -#define CONFIG_SYS_MICRON_RFSH 0x01080000 -#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 -#define CONFIG_SYS_MICRON_OCD_DEFAULT 0x01010780 - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#undef CONFIG_BKUP_FLASH -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#ifdef CONFIG_BKUP_FLASH -#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* max flash size in bytes */ -#else -#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* max flash size in bytes */ -#endif -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * CPLD registers area is really only 32 bytes in size, but the smallest possible LP - * window is 64KB - */ -#define CONFIG_SYS_CPLD_BASE 0x82000000 -#define CONFIG_SYS_CPLD_SIZE 0x00010000 /* 64 KB */ - -#define CONFIG_SYS_SRAM_BASE 0x30000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -#define CONFIG_SYS_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ -#define CONFIG_SYS_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ -#define CONFIG_SYS_CS_ALETIMING 0x00000005 /* Use alternative CS timing for CS0 and CS2 */ - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE /* End of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of monitor */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ -#else -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#endif - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ -#if CONFIG_PSC_CONSOLE != 3 -#error CONFIG_PSC_CONSOLE must be 3 -#endif -#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -/* Use the HUSH parser */ -#define CONFIG_SYS_HUSH_PARSER -#ifdef CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#endif - -/* - * PCI - */ -#ifdef CONFIG_PCI - -/* - * General PCI - */ -#define CONFIG_SYS_PCI_MEM_BASE 0xA0000000 -#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI_MMIO_BASE (CONFIG_SYS_PCI_MEM_BASE + CONFIG_SYS_PCI_MEM_SIZE) -#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE -#define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI_IO_PHYS 0x84000000 -#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16M */ - - -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#endif - -/* I2C */ -#define CONFIG_HARD_I2C /* I2C with hardware support */ -#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ -#define CONFIG_SYS_I2C_SLAVE 0x7F -#if 0 -#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ -#endif - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_IIM - -/* - * EEPROM configuration - */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_NET_MULTI -#define CONFIG_PHY_ADDR 0x1 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Configure on-board RTC - */ -#define CONFIG_RTC_M41T62 /* use M41T62 rtc via i2 */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the Flash sector size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x2000 -#ifdef CONFIG_BKUP_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (256K) for env */ -#else -#define CONFIG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */ -#endif - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DATE -#undef CONFIG_CMD_FUSE -#define CONFIG_CMD_IDE -#define CONFIG_CMD_EXT2 - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -#if defined(CONFIG_CMD_IDE) -#define CONFIG_DOS_PARTITION -#define CONFIG_MAC_PARTITION -#define CONFIG_ISO_PARTITION -#endif /* defined(CONFIG_CMD_IDE) */ - -/* - * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. - * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set - * to 0xFFFF, watchdog timeouts after about 64s. For details refer - * to chapter 36 of the MPC5121e Reference Manual. - */ -/* #define CONFIG_WATCHDOG */ /* enable watchdog */ -#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF - - /* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ - -#ifdef CONFIG_CMD_KGDB - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | HID0_ICE) -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_TIMESTAMP - -#define CONFIG_HOSTNAME ads5121 -#define CONFIG_BOOTFILE ads5121/uImage -#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx - -#define CONFIG_LOADADDR 400000 /* default location for tftp and bootm */ - -#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=200000\0" \ - "kernel_addr_r=600000\0" \ - "fdt_addr_r=880000\0" \ - "ramdisk_addr_r=900000\0" \ - "u-boot_addr=FFF00000\0" \ - "kernel_addr=FFC40000\0" \ - "fdt_addr=FFEC0000\0" \ - "ramdisk_addr=FC040000\0" \ - "ramdiskfile=ads5121/uRamdisk\0" \ - "u-boot=ads5121/u-boot.bin\0" \ - "bootfile=ads5121/uImage\0" \ - "fdtfile=ads5121/ads5121.dtb\0" \ - "rootpath=/opt/eldk/ppc_6xx\n" \ - "netdev=eth0\0" \ - "consdev=ttyPSC0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_self=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run ramargs addip addtty;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off ${u-boot_addr} +${filesize};" \ - "era ${u-boot_addr} +${filesize};" \ - "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ - "upd=run load update\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 -#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11300" - -/*----------------------------------------------------------------------- - * IDE/ATA stuff - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for IDE not supported */ - -#define CONFIG_IDE_RESET /* reset for IDE supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR MPC512X_PATA - -/* Offset for data I/O RefMan MPC5121EE Table 28-10 */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x00A0) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers RefMan MPC5121EE Table 28-23 */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x00D8) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#define ATA_BASE_ADDR MPC512X_PATA - -/* - * Control register bit definitions - */ -#define FSL_ATA_CTRL_FIFO_RST_B 0x80000000 -#define FSL_ATA_CTRL_ATA_RST_B 0x40000000 -#define FSL_ATA_CTRL_FIFO_TX_EN 0x20000000 -#define FSL_ATA_CTRL_FIFO_RCV_EN 0x10000000 -#define FSL_ATA_CTRL_DMA_PENDING 0x08000000 -#define FSL_ATA_CTRL_DMA_ULTRA 0x04000000 -#define FSL_ATA_CTRL_DMA_WRITE 0x02000000 -#define FSL_ATA_CTRL_IORDY_EN 0x01000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h new file mode 100644 index 0000000000..9e3b0b7317 --- /dev/null +++ b/include/configs/mpc5121ads.h @@ -0,0 +1,550 @@ +/* + * (C) Copyright 2007, 2008 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * MPC5121ADS board configuration file + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_MPC5121ADS 1 +/* + * Memory map for the MPC5121ADS board: + * + * 0x0000_0000 - 0x0FFF_FFFF DDR RAM (256 MB) + * 0x3000_0000 - 0x3001_FFFF SRAM (128 KB) + * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) + * 0x8200_0000 - 0x8200_001F CPLD (32 B) + * 0x8400_0000 - 0x82FF_FFFF PCI I/O space (16 MB) + * 0xA000_0000 - 0xAFFF_FFFF PCI memory space (256 MB) + * 0xB000_0000 - 0xBFFF_FFFF PCI memory mapped I/O space (256 MB) + * 0xFC00_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB) + */ + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 Family */ +#define CONFIG_MPC512X 1 /* MPC512X family */ +#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ +#undef CONFIG_FSL_DIU_LOGO_BMP /* Don't include FSL DIU binary bmp */ + +/* video */ +#undef CONFIG_VIDEO + +#if defined(CONFIG_VIDEO) +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#endif + +/* CONFIG_PCI is defined at config time */ + +#ifdef CONFIG_MPC5121ADS_REV2 +#define CONFIG_SYS_MPC512X_CLKIN 66000000 /* in Hz */ +#else +#define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ +#define CONFIG_PCI +#endif + +#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_SYS_IMMR 0x80000000 +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100) + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 + +/* + * DDR Setup - manually set all parameters as there's no SPD etc. + */ +#ifdef CONFIG_MPC5121ADS_REV2 +#define CONFIG_SYS_DDR_SIZE 256 /* MB */ +#else +#define CONFIG_SYS_DDR_SIZE 512 /* MB */ +#endif +#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE + +/* DDR Controller Configuration + * + * SYS_CFG: + * [31:31] MDDRC Soft Reset: Diabled + * [30:30] DRAM CKE pin: Enabled + * [29:29] DRAM CLK: Enabled + * [28:28] Command Mode: Enabled (For initialization only) + * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] + * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] + * [20:19] Read Test: DON'T USE + * [18:18] Self Refresh: Enabled + * [17:17] 16bit Mode: Disabled + * [16:13] Ready Delay: 2 + * [12:12] Half DQS Delay: Disabled + * [11:11] Quarter DQS Delay: Disabled + * [10:08] Write Delay: 2 + * [07:07] Early ODT: Disabled + * [06:06] On DIE Termination: Disabled + * [05:05] FIFO Overflow Clear: DON'T USE here + * [04:04] FIFO Underflow Clear: DON'T USE here + * [03:03] FIFO Overflow Pending: DON'T USE here + * [02:02] FIFO Underlfow Pending: DON'T USE here + * [01:01] FIFO Overlfow Enabled: Enabled + * [00:00] FIFO Underflow Enabled: Enabled + * TIME_CFG0 + * [31:16] DRAM Refresh Time: 0 CSB clocks + * [15:8] DRAM Command Time: 0 CSB clocks + * [07:00] DRAM Precharge Time: 0 CSB clocks + * TIME_CFG1 + * [31:26] DRAM tRFC: + * [25:21] DRAM tWR1: + * [20:17] DRAM tWRT1: + * [16:11] DRAM tDRR: + * [10:05] DRAM tRC: + * [04:00] DRAM tRAS: + * TIME_CFG2 + * [31:28] DRAM tRCD: + * [27:23] DRAM tFAW: + * [22:19] DRAM tRTW1: + * [18:15] DRAM tCCD: + * [14:10] DRAM tRTP: + * [09:05] DRAM tRP: + * [04:00] DRAM tRPA + */ +#ifdef CONFIG_MPC5121ADS_REV2 +#define CONFIG_SYS_MDDRC_SYS_CFG 0xF8604A00 +#define CONFIG_SYS_MDDRC_SYS_CFG_RUN 0xE8604A00 +#define CONFIG_SYS_MDDRC_TIME_CFG1 0x54EC1168 +#define CONFIG_SYS_MDDRC_TIME_CFG2 0x35210864 +#else +#define CONFIG_SYS_MDDRC_SYS_CFG 0xFA804A00 +#define CONFIG_SYS_MDDRC_SYS_CFG_RUN 0xEA804A00 +#define CONFIG_SYS_MDDRC_TIME_CFG1 0x68EC1168 +#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34310864 +#endif +#define CONFIG_SYS_MDDRC_SYS_CFG_EN 0xF0000000 +#define CONFIG_SYS_MDDRC_TIME_CFG0 0x00003D2E +#define CONFIG_SYS_MDDRC_TIME_CFG0_RUN 0x06183D2E + +#define CONFIG_SYS_MICRON_NOP 0x01380000 +#define CONFIG_SYS_MICRON_PCHG_ALL 0x01100400 +#define CONFIG_SYS_MICRON_EM2 0x01020000 +#define CONFIG_SYS_MICRON_EM3 0x01030000 +#define CONFIG_SYS_MICRON_EN_DLL 0x01010000 +#define CONFIG_SYS_MICRON_RFSH 0x01080000 +#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 +#define CONFIG_SYS_MICRON_OCD_DEFAULT 0x01010780 + +/* DDR Priority Manager Configuration */ +#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 +#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 +#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 +#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC +#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA +#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 +#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 +#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 +#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 +#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 +#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 +#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 +#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa +#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa +#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 +#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 +#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 +#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 + +/* + * NOR FLASH on the Local Bus + */ +#undef CONFIG_BKUP_FLASH +#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ +#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ +#ifdef CONFIG_BKUP_FLASH +#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* max flash size in bytes */ +#else +#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* max flash size in bytes */ +#endif +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ + +#undef CONFIG_SYS_FLASH_CHECKSUM + +/* + * CPLD registers area is really only 32 bytes in size, but the smallest possible LP + * window is 64KB + */ +#define CONFIG_SYS_CPLD_BASE 0x82000000 +#define CONFIG_SYS_CPLD_SIZE 0x00010000 /* 64 KB */ + +#define CONFIG_SYS_SRAM_BASE 0x30000000 +#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ + +#define CONFIG_SYS_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ +#define CONFIG_SYS_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ +#define CONFIG_SYS_CS_ALETIMING 0x00000005 /* Use alternative CS timing for CS0 and CS2 */ + +/* Use SRAM for initial stack */ +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Initial RAM address */ +#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_SRAM_SIZE /* End of used area in RAM */ + +#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of monitor */ +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#ifdef CONFIG_FSL_DIU_FB +#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ +#else +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) +#endif + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#undef CONFIG_SERIAL_SOFTWARE_FIFO + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ +#if CONFIG_PSC_CONSOLE != 3 +#error CONFIG_PSC_CONSOLE must be 3 +#endif +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} + +#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE +#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR +#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE +#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#ifdef CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#endif + +/* + * PCI + */ +#ifdef CONFIG_PCI + +/* + * General PCI + */ +#define CONFIG_SYS_PCI_MEM_BASE 0xA0000000 +#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE +#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI_MMIO_BASE (CONFIG_SYS_PCI_MEM_BASE + CONFIG_SYS_PCI_MEM_SIZE) +#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE +#define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCI_IO_BASE 0x00000000 +#define CONFIG_SYS_PCI_IO_PHYS 0x84000000 +#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16M */ + + +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +#endif + +/* I2C */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* so disable bit-banged I2C */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#if 0 +#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ +#endif + +/* + * IIM - IC Identification Module + */ +#undef CONFIG_IIM + +/* + * EEPROM configuration + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* 16-bit EEPROM address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Atmel: AT24C32A-10TQ-2.7 */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* 10ms of delay */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 32-Byte Page Write Mode */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC512x_FEC 1 +#define CONFIG_NET_MULTI +#define CONFIG_PHY_ADDR 0x1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_FEC_AN_TIMEOUT 1 +#define CONFIG_HAS_ETH0 + +/* + * Configure on-board RTC + */ +#define CONFIG_RTC_M41T62 /* use M41T62 rtc via i2 */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +/* This has to be a multiple of the Flash sector size */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_ENV_SIZE 0x2000 +#ifdef CONFIG_BKUP_FLASH +#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (256K) for env */ +#else +#define CONFIG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */ +#endif + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#include + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_DATE +#undef CONFIG_CMD_FUSE +#define CONFIG_CMD_IDE +#define CONFIG_CMD_EXT2 + +#if defined(CONFIG_PCI) +#define CONFIG_CMD_PCI +#endif + +#if defined(CONFIG_CMD_IDE) +#define CONFIG_DOS_PARTITION +#define CONFIG_MAC_PARTITION +#define CONFIG_ISO_PARTITION +#endif /* defined(CONFIG_CMD_IDE) */ + +/* + * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. + * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set + * to 0xFFFF, watchdog timeouts after about 64s. For details refer + * to chapter 36 of the MPC5121e Reference Manual. + */ +/* #define CONFIG_WATCHDOG */ /* enable watchdog */ +#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF + + /* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ + +#ifdef CONFIG_CMD_KGDB + #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else + #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif + + +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ + +/* Cache Configuration */ +#define CONFIG_SYS_DCACHE_SIZE 32768 +#define CONFIG_SYS_CACHELINE_SIZE 32 +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ +#endif + +#define CONFIG_SYS_HID0_INIT 0x000000000 +#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | HID0_ICE) +#define CONFIG_SYS_HID2 HID2_HBE + +#define CONFIG_HIGH_BATS 1 /* High BATs supported */ + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_TIMESTAMP + +#define CONFIG_HOSTNAME mpc5121ads +#define CONFIG_BOOTFILE mpc5121ads/uImage +#define CONFIG_ROOTPATH /opt/eldk/ppc_6xx + +#define CONFIG_LOADADDR 400000 /* default location for tftp and bootm */ + +#define CONFIG_BOOTDELAY 5 /* -1 disables auto-boot */ +#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "u-boot_addr_r=200000\0" \ + "kernel_addr_r=600000\0" \ + "fdt_addr_r=880000\0" \ + "ramdisk_addr_r=900000\0" \ + "u-boot_addr=FFF00000\0" \ + "kernel_addr=FFC40000\0" \ + "fdt_addr=FFEC0000\0" \ + "ramdisk_addr=FC040000\0" \ + "ramdiskfile=mpc5121ads/uRamdisk\0" \ + "u-boot=mpc5121ads/u-boot.bin\0" \ + "bootfile=mpc5121ads/uImage\0" \ + "fdtfile=mpc5121ads/mpc5121ads.dtb\0" \ + "rootpath=/opt/eldk/ppc_6xx\n" \ + "netdev=eth0\0" \ + "consdev=ttyPSC0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} " \ + "console=${consdev},${baudrate}\0" \ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr} - ${fdt_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${fdt_addr_r} ${fdtfile};" \ + "run nfsargs addip addtty;" \ + "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ + "net_self=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ + "tftp ${fdt_addr_r} ${fdtfile};" \ + "run ramargs addip addtty;" \ + "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ + "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ + "update=protect off ${u-boot_addr} +${filesize};" \ + "era ${u-boot_addr} +${filesize};" \ + "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ + "upd=run load update\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 + +#define OF_CPU "PowerPC,5121@0" +#define OF_SOC_COMPAT "fsl,mpc5121-immr" +#define OF_TBCLK (bd->bi_busfreq / 4) +#define OF_STDOUT_PATH "/soc@80000000/serial@11300" + +/*----------------------------------------------------------------------- + * IDE/ATA stuff + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for IDE not supported */ + +#define CONFIG_IDE_RESET /* reset for IDE supported */ +#define CONFIG_IDE_PREINIT + +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ + +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 +#define CONFIG_SYS_ATA_BASE_ADDR MPC512X_PATA + +/* Offset for data I/O RefMan MPC5121EE Table 28-10 */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x00A0) + +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) + +/* Offset for alternate registers RefMan MPC5121EE Table 28-23 */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x00D8) + +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 + +#define ATA_BASE_ADDR MPC512X_PATA + +/* + * Control register bit definitions + */ +#define FSL_ATA_CTRL_FIFO_RST_B 0x80000000 +#define FSL_ATA_CTRL_ATA_RST_B 0x40000000 +#define FSL_ATA_CTRL_FIFO_TX_EN 0x20000000 +#define FSL_ATA_CTRL_FIFO_RCV_EN 0x10000000 +#define FSL_ATA_CTRL_DMA_PENDING 0x08000000 +#define FSL_ATA_CTRL_DMA_ULTRA 0x04000000 +#define FSL_ATA_CTRL_DMA_WRITE 0x02000000 +#define FSL_ATA_CTRL_IORDY_EN 0x01000000 + +#endif /* __CONFIG_H */