From: Masahiro Yamada Date: Mon, 15 Dec 2014 14:26:10 +0000 (+0900) Subject: mpc8xx: remove SPD823TS board support X-Git-Tag: v2015.01~81 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=72ba368f45a3cdec0bb33a70cd7eec8bb64dceb1;p=u-boot mpc8xx: remove SPD823TS board support This board is still a non-generic board. Signed-off-by: Masahiro Yamada Cc: Wolfgang Denk --- diff --git a/arch/powerpc/cpu/mpc8xx/Kconfig b/arch/powerpc/cpu/mpc8xx/Kconfig index 7fa5b0b677..8bda42e804 100644 --- a/arch/powerpc/cpu/mpc8xx/Kconfig +++ b/arch/powerpc/cpu/mpc8xx/Kconfig @@ -34,9 +34,6 @@ config TARGET_R360MPI config TARGET_RRVISION bool "Support RRvision" -config TARGET_SPD823TS - bool "Support SPD823TS" - config TARGET_TQM823L bool "Support TQM823L" @@ -83,7 +80,6 @@ source "board/ivm/Kconfig" source "board/lwmon/Kconfig" source "board/netvia/Kconfig" source "board/r360mpi/Kconfig" -source "board/spd8xx/Kconfig" source "board/tqc/tqm8xx/Kconfig" endmenu diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c index 6a1cd4675a..f772787d17 100644 --- a/arch/powerpc/cpu/mpc8xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c @@ -130,8 +130,7 @@ void cpu_init_f (volatile immap_t * immr) defined(CONFIG_IVMS8) || \ defined(CONFIG_LWMON) || \ defined(CONFIG_R360MPI) || \ - defined(CONFIG_RMU) || \ - defined(CONFIG_SPD823TS) + defined(CONFIG_RMU) memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM; #endif diff --git a/board/spd8xx/Kconfig b/board/spd8xx/Kconfig deleted file mode 100644 index 2430616ec2..0000000000 --- a/board/spd8xx/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_SPD823TS - -config SYS_BOARD - default "spd8xx" - -config SYS_CONFIG_NAME - default "SPD823TS" - -endif diff --git a/board/spd8xx/MAINTAINERS b/board/spd8xx/MAINTAINERS deleted file mode 100644 index 7ed9423ece..0000000000 --- a/board/spd8xx/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -SPD8XX BOARD -M: Wolfgang Denk -S: Maintained -F: board/spd8xx/ -F: include/configs/SPD823TS.h -F: configs/SPD823TS_defconfig diff --git a/board/spd8xx/Makefile b/board/spd8xx/Makefile deleted file mode 100644 index c393f066cb..0000000000 --- a/board/spd8xx/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = spd8xx.o flash.o diff --git a/board/spd8xx/flash.c b/board/spd8xx/flash.c deleted file mode 100644 index 4a332e037b..0000000000 --- a/board/spd8xx/flash.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - /* All Speech Design board memory (DRAM and EPROM) initialisation is - done in dram_init(). - The caller of ths function here expects the total size and will hang, - if we give here back 0. So we return the EPROM size. */ - - return (1024 * 1024); /* 1 MB */ -} - -/*----------------------------------------------------------------------- - */ - -void flash_print_info (flash_info_t *info) -{ - printf("no FLASH memory in MPC823TS board\n"); - return; -} - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - return 1; -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/spd8xx/spd8xx.c b/board/spd8xx/spd8xx.c deleted file mode 100644 index d3320bb9a3..0000000000 --- a/board/spd8xx/spd8xx.c +++ /dev/null @@ -1,278 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * Ulrich Lutz, Speech Design GmbH, ulutz@datalab.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* ------------------------------------------------------------------------- */ - -static long int dram_size (long int, long int *, long int); - -/* ------------------------------------------------------------------------- */ - -#define _NOT_USED_ 0xFFFFFFFF - -const uint sharc_table[] = { - /* - * Single Read. (Offset 0 in UPM RAM) - */ - 0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04, - 0xFFFFEC05, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Read. (Offset 8 in UPM RAM) - */ - /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPM RAM) - */ - 0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04, - 0xFFFFEC05, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPM RAM) - */ - /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPM RAM) - */ - /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPM RAM) - */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - - -const uint sdram_table[] = { - /* - * Single Read. (Offset 0 in UPM RAM) - */ - 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00, - 0x1FF77C47, /* last */ - /* - * SDRAM Initialization (offset 5 in UPM RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */ - /* - * Burst Read. (Offset 8 in UPM RAM) - */ - 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00, - 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Single Write. (Offset 18 in UPM RAM) - */ - 0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPM RAM) - */ - 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00, - 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */ - _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Refresh (Offset 30 in UPM RAM) - */ - 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC84, 0xFFFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* - * Exception. (Offset 3c in UPM RAM) - */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, -}; - -/* ------------------------------------------------------------------------- */ - - -/* - * Check Board Identity: - * - */ - -int checkboard (void) -{ - puts ("Board: SPD823TS\n"); - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size_b0; - -#if 0 - /* - * Map controller bank 2 to the SRAM bank at preliminary address. - */ - memctl->memc_or2 = CONFIG_SYS_OR2; - memctl->memc_br2 = CONFIG_SYS_BR2; -#endif - - /* - * Map controller bank 4 to the PER8 bank. - */ - memctl->memc_or4 = CONFIG_SYS_OR4; - memctl->memc_br4 = CONFIG_SYS_BR4; - -#if 0 - /* Configure SHARC at UMA */ - upmconfig (UPMA, (uint *) sharc_table, - sizeof (sharc_table) / sizeof (uint)); - /* Map controller bank 5 to the SHARC */ - memctl->memc_or5 = CONFIG_SYS_OR5; - memctl->memc_br5 = CONFIG_SYS_BR5; -#endif - - memctl->memc_mamr = 0x00001000; - - /* Configure SDRAM at UMB */ - upmconfig (UPMB, (uint *) sdram_table, - sizeof (sdram_table) / sizeof (uint)); - - memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K; - - memctl->memc_mar = 0x00000088; - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM; - memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM; - - memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL; /* refresh not enabled yet */ - - udelay (200); - memctl->memc_mcr = 0x80806105; - udelay (1); - memctl->memc_mcr = 0x80806130; - udelay (1); - memctl->memc_mcr = 0x80806130; - udelay (1); - memctl->memc_mcr = 0x80806106; - - memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */ - - /* - * Check Bank 0 Memory Size for re-configuration - */ - size_b0 = - dram_size (CONFIG_SYS_MBMR_8COL, SDRAM_BASE3_PRELIM, - SDRAM_MAX_SIZE); - - memctl->memc_mbmr = CONFIG_SYS_MBMR_8COL | MBMR_PTBE; - - return (size_b0); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - - memctl->memc_mbmr = mamr_value; - - return (get_ram_size (base, maxsize)); -} - -/* ------------------------------------------------------------------------- */ - -void reset_phy (void) -{ - immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - ushort sreg; - - /* Configure extra port pins for NS DP83843 PHY */ - immr->im_ioport.iop_papar &= ~(PA_ENET_MDC | PA_ENET_MDIO); - - sreg = immr->im_ioport.iop_padir; - sreg |= PA_ENET_MDC; /* Mgmt. Data Clock is Output */ - sreg &= ~(PA_ENET_MDIO); /* Mgmt. Data I/O is bidirect. => Input */ - immr->im_ioport.iop_padir = sreg; - - immr->im_ioport.iop_padat &= ~(PA_ENET_MDC); /* set MDC = 0 */ - - /* - * RESET in implemented by a positive pulse of at least 1 us - * at the reset pin. - * - * Configure RESET pins for NS DP83843 PHY, and RESET chip. - * - * Note: The RESET pin is high active, but there is an - * inverter on the SPD823TS board... - */ - immr->im_ioport.iop_pcpar &= ~(PC_ENET_RESET); - immr->im_ioport.iop_pcdir |= PC_ENET_RESET; - /* assert RESET signal of PHY */ - immr->im_ioport.iop_pcdat &= ~(PC_ENET_RESET); - udelay (10); - /* de-assert RESET signal of PHY */ - immr->im_ioport.iop_pcdat |= PC_ENET_RESET; - udelay (10); -} - -/* ------------------------------------------------------------------------- */ - -void ide_set_reset (int on) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - - /* - * Configure PC for IDE Reset Pin - */ - if (on) { /* assert RESET */ - immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET); - } else { /* release RESET */ - immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET; - } - - /* program port pin as GPIO output */ - immr->im_ioport.iop_pcpar &= ~(CONFIG_SYS_PC_IDE_RESET); - immr->im_ioport.iop_pcso &= ~(CONFIG_SYS_PC_IDE_RESET); - immr->im_ioport.iop_pcdir |= CONFIG_SYS_PC_IDE_RESET; -} - -/* ------------------------------------------------------------------------- */ diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds deleted file mode 100644 index 463af7eaa4..0000000000 --- a/board/spd8xx/u-boot.lds +++ /dev/null @@ -1,91 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - net/built-in.o (.text*) - arch/powerpc/cpu/mpc8xx/built-in.o (.text*) - *(.text.v*printf) - - . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.ppcenv*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug deleted file mode 100644 index 7cfed1f1d5..0000000000 --- a/board/spd8xx/u-boot.lds.debug +++ /dev/null @@ -1,122 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - arch/powerpc/lib/extable.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/common/flash.c b/common/flash.c index f1440c2c18..fa33f03d2e 100644 --- a/common/flash.c +++ b/common/flash.c @@ -88,7 +88,6 @@ flash_protect (int flag, ulong from, ulong to, flash_info_t *info) flash_info_t * addr2info (ulong addr) { -#ifndef CONFIG_SPD823TS flash_info_t *info; int i; @@ -104,7 +103,6 @@ addr2info (ulong addr) return (info); } } -#endif /* CONFIG_SPD823TS */ return (NULL); } @@ -125,9 +123,6 @@ addr2info (ulong addr) int flash_write (char *src, ulong addr, ulong cnt) { -#ifdef CONFIG_SPD823TS - return (ERR_TIMOUT); /* any other error codes are possible as well */ -#else int i; ulong end = addr + cnt - 1; flash_info_t *info_first = addr2info (addr); @@ -181,7 +176,6 @@ flash_write (char *src, ulong addr, ulong cnt) #endif /* CONFIG_SYS_FLASH_VERIFY_AFTER_WRITE */ return (ERR_OK); -#endif /* CONFIG_SPD823TS */ } /*----------------------------------------------------------------------- diff --git a/configs/SPD823TS_defconfig b/configs/SPD823TS_defconfig deleted file mode 100644 index 1b218c6bc6..0000000000 --- a/configs/SPD823TS_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_8xx=y -CONFIG_TARGET_SPD823TS=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 3a27d4c349..623a30e5a4 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +SPD823TS powerpc mpc8xx - - Wolfgang Denk KUP4K powerpc mpc8xx - - Klaus Heydeck KUP4X powerpc mpc8xx - - Klaus Heydeck ELPT860 powerpc mpc8xx - - The LEOX team diff --git a/include/commproc.h b/include/commproc.h index 311745ecc4..4c399348e5 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -627,35 +627,6 @@ typedef struct scc_enet { #endif /* CONFIG_NETVIA */ -/*** SPD823TS ******************************************************/ - -#ifdef CONFIG_SPD823TS -/* Bits in parallel I/O port registers that have to be set/cleared - * to configure the pins for SCC2 use. - */ -#define PROFF_ENET PROFF_SCC2 /* Ethernet on SCC2 */ -#define CPM_CR_ENET CPM_CR_CH_SCC2 -#define SCC_ENET 1 -#define PA_ENET_MDC ((ushort)0x0001) /* PA 15 !!! */ -#define PA_ENET_MDIO ((ushort)0x0002) /* PA 14 !!! */ -#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */ -#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */ -#define PA_ENET_RCLK ((ushort)0x0200) /* PA 6 */ -#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */ - -#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */ - -#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */ -#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */ -#define PC_ENET_RESET ((ushort)0x0100) /* PC 7 !!! */ - -/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to - * SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero. - */ -#define SICR_ENET_MASK ((uint)0x0000ff00) -#define SICR_ENET_CLKRT ((uint)0x00002E00) -#endif /* CONFIG_SPD823TS */ - /*** MVS1, TQM823L/M, TQM850L/M, TQM885D, R360MPI **********/ #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \ diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h deleted file mode 100644 index a8b4fbb7f8..0000000000 --- a/include/configs/SPD823TS.h +++ /dev/null @@ -1,402 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC823 1 /* This is a MPC823 CPU */ -#define CONFIG_SPD823TS 1 /* ...on a SPD823TS board */ - -#define CONFIG_SYS_TEXT_BASE 0xFF000000 - -#define CONFIG_RESET_PHY_R 1 /* Call reset_phy() */ - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 115200 -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */ - -#define CONFIG_BOOTARGS "root=/dev/nfs rw " \ - "nfsroot=10.0.0.2:/opt/eldk/ppc_8xx " \ - "nfsaddrs=10.0.0.99:10.0.0.2" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - -#undef CONFIG_WATCHDOG /* watchdog disabled */ - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_IDE - -#undef CONFIG_CMD_SAVEENV -#undef CONFIG_CMD_FLASH - - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - - -/*----------------------------------------------------------------------*/ -#define CONFIG_ETHADDR 00:D0:93:00:01:CB -#define CONFIG_IPADDR 10.0.0.98 -#define CONFIG_SERVERIP 10.0.0.1 -#undef CONFIG_BOOTCOMMAND -#define CONFIG_BOOTCOMMAND "tftp 200000 uImage;bootm 200000" -/*----------------------------------------------------------------------*/ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00F00000 /* 1 ... 15MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ - -#define CONFIG_SYS_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ - -#define CONFIG_SYS_PC_IDE_RESET ((ushort)0x0008) /* PC 12 */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFFF00000 /* was: 0xFF000000 */ - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#ifdef DEBUG -#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ -#else -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#endif -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 0 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 0 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 0 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 0 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x0800 /* Total Size of Environment Sector */ -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -/* 0x00000040 */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC00 | SIUMCR_GB5E) - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit, set PLL multiplication factor ! - */ -/* 0x00b0c0c0 */ -#define CONFIG_SYS_PLPRCR \ - ( (11 << PLPRCR_MF_SHIFT) | \ - PLPRCR_SPLSS | PLPRCR_TEXPS | /*PLPRCR_TMIST|*/ \ - /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL | \ - PLPRCR_CSR | PLPRCR_LOLRE /*|PLPRCR_FIOPD*/ \ - ) - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -/* 0x01800014 */ -#define CONFIG_SYS_SCCR (SCCR_COM00 | /*SCCR_TBS|*/ \ - SCCR_RTDIV | SCCR_RTSEL | \ - /*SCCR_CRQEN|*/ /*SCCR_PRQEN|*/ \ - SCCR_EBDF00 | SCCR_DFSYNC00 | \ - SCCR_DFBRG00 | SCCR_DFNL000 | \ - SCCR_DFNH000 | SCCR_DFLCD101 | \ - SCCR_DFALCD00) - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register - *----------------------------------------------------------------------- - */ -/* 0x00C3 */ -#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) - - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration Register - *----------------------------------------------------------------------- - */ -/* TIMEP=2 */ -#define CONFIG_SYS_RCCR 0x0200 - -/*----------------------------------------------------------------------- - * RMDS - RISC Microcode Development Support Control Register - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RMDS 0 - -/*----------------------------------------------------------------------- - * SDSR - SDMA Status Register - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SDSR ((u_char)0x83) - -/*----------------------------------------------------------------------- - * SDMR - SDMA Mask Register - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SDMR ((u_char)0x00) - -/*----------------------------------------------------------------------- - * - * Interrupt Levels - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_CPM_INTERRUPT 13 /* SIU_LEVEL6 */ - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */ -#define CONFIG_IDE_8xx_DIRECT 1 /* PCMCIA interface required */ -#define CONFIG_IDE_LED 1 /* LED for ide supported */ -#define CONFIG_IDE_RESET 1 /* reset for ide supported */ - -#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ - -#define CONFIG_SYS_ATA_BASE_ADDR 0xFE100000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0C00 - -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0080 /* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 /* Offset for alternate registers */ - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_DER 0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0xFF000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0xFF080000 /* FLASH bank #1 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -/* EPROMs are 512kb */ -#define CONFIG_SYS_REMAP_OR_AM 0xFFF80000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xFFF80000 /* OR addr mask */ - -/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */ -#define CONFIG_SYS_OR_TIMING_FLASH (/* OR_CSNT_SAM | */ OR_ACS_DIV4 | OR_BI | \ - OR_SCY_5_CLK | OR_EHTR) - -#define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) -/* 16 bit, bank valid */ -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) - -#define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM -/* 16 bit, bank valid */ -#define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_16 | BR_V ) - -/* - * BR2-5 and OR2-5 (SRAM/SDRAM/PER8/SHARC) - * - */ -#define SRAM_BASE 0xFE200000 /* SRAM bank */ -#define SRAM_OR_AM 0xFFE00000 /* SRAM is 2 MB */ - -#define SDRAM_BASE3_PRELIM 0x00000000 /* SDRAM bank */ -#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */ -#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB SDRAM */ - -#define PER8_BASE 0xFE000000 /* PER8 bank */ -#define PER8_OR_AM 0xFFF00000 /* PER8 is 1 MB */ - -#define SHARC_BASE 0xFE400000 /* SHARC bank */ -#define SHARC_OR_AM 0xFFC00000 /* SHARC is 4 MB */ - -/* SRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ - -#define CONFIG_SYS_OR_TIMING_SRAM 0x00000D42 /* SRAM-Timing */ -#define CONFIG_SYS_OR2 (SRAM_OR_AM | CONFIG_SYS_OR_TIMING_SRAM ) -#define CONFIG_SYS_BR2 ((SRAM_BASE & BR_BA_MSK) | BR_PS_16 | BR_V ) - -/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ - -#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 /* SDRAM-Timing */ -#define CONFIG_SYS_OR3_PRELIM (SDRAM_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) -#define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V ) - -#define CONFIG_SYS_OR_TIMING_PER8 0x00000F32 /* PER8-Timing */ -#define CONFIG_SYS_OR4 (PER8_OR_AM | CONFIG_SYS_OR_TIMING_PER8 ) -#define CONFIG_SYS_BR4 ((PER8_BASE & BR_BA_MSK) | BR_PS_8 | BR_V ) - -#define CONFIG_SYS_OR_TIMING_SHARC 0x00000700 /* SHARC-Timing */ -#define CONFIG_SYS_OR5 (SHARC_OR_AM | CONFIG_SYS_OR_TIMING_SHARC ) -#define CONFIG_SYS_BR5 ((SHARC_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_UPMA | BR_V ) -/* - * Memory Periodic Timer Prescaler - */ - -/* periodic timer for refresh */ -#define CONFIG_SYS_MBMR_PTB 204 - -/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */ -#define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ - -/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ -#define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ -#define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ - -/* - * MBMR settings for SDRAM - */ - -/* 8 column SDRAM */ -#define CONFIG_SYS_MBMR_8COL ((CONFIG_SYS_MBMR_PTB << MBMR_PTB_SHIFT) | \ - MBMR_AMB_TYPE_0 | MBMR_DSB_1_CYCL | MBMR_G0CLB_A11 | \ - MBMR_RLFB_1X | MBMR_WLFB_1X | MBMR_TLFB_4X) - -#endif /* __CONFIG_H */ diff --git a/include/pcmcia.h b/include/pcmcia.h index 2ff399b81d..371c9a49b0 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -23,8 +23,6 @@ #if defined(CONFIG_TQM8xxL) # define CONFIG_PCMCIA_SLOT_B /* The TQM8xxL use SLOT_B */ -#elif defined(CONFIG_SPD823TS) /* The SPD8xx use SLOT_B */ -# define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_IVMS8) || defined(CONFIG_IVML24) /* The IVM* use SLOT_A */ # define CONFIG_PCMCIA_SLOT_A #elif defined(CONFIG_LWMON) /* The LWMON use SLOT_B */