From: Heiko Schocher Date: Tue, 8 Mar 2011 09:53:51 +0000 (+0100) Subject: arm, keymile: updates for the arm based boards from keymile X-Git-Tag: v2011.06-rc1~101 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=731b968044b0f96239dd41b8c7ba642cac81cfc5;p=u-boot arm, keymile: updates for the arm based boards from keymile define KM_IVM_BUS and KM_ENV_BUS macros KM_IVM_BUS is used to define the EEprom_ivm environment variable. These macros allow the reuse of these I2C addresses in other code locations. remove unneeded code On first HW versions the BOCO FPGA was behind a MUX device. These HW versions are not supported anymore. And therefore this code can be removed. added LED initialization for SUEN3 The bootstat LED required to be initialized so to have a green colour after start-up. define CONFIG_SYS_TEXT_BASE This is needed by the relocation code and is not the same for our ARM BEC and thus needs to be defined. remove memsize variable An environment variable for memsize is not needed. this can be get via the board info struct. remove unneeded double access to bi_dram[i].size field Signed-off-by: Valentin Longchamp Signed-off-by: Holger Brunck Signed-off-by: Luca Haab Signed-off-by: Heiko Schocher cc: Prafulla Wadaskar --- diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 0f1a6d1d7a..cb999b23fa 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -117,6 +117,34 @@ int ethernet_present(void) return ret; } +int initialize_unit_leds(void) +{ + /* + * init the unit LEDs + * per default they all are + * ok apart from bootstat + * LED connected through BOCO + * BOCO lies at the address 0x10 + * LEDs are in the block CTRL_H (addr 0x02) + * BOOTSTAT LED is the first 0x01 + */ + #define BOCO 0x10 + #define CTRL_H 0x02 + #define APPLEDMASK 0x01 + uchar buf; + + if (i2c_read(BOCO, CTRL_H, 1, &buf, 1) != 0) { + printf("%s: Error reading Boco\n", __func__); + return -1; + } + buf |= APPLEDMASK; + if (i2c_write(BOCO, CTRL_H, 1, &buf, 1) != 0) { + printf("%s: Error writing Boco\n", __func__); + return -1; + } + return 0; +} + int misc_init_r(void) { char *str; @@ -133,6 +161,9 @@ int misc_init_r(void) printf("Overwriting MACH_TYPE with %d!!!\n", mach_type); gd->bd->bi_arch_number = mach_type; } + + initialize_unit_leds(); + return 0; } @@ -239,7 +270,6 @@ void dram_init_banksize(void) for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { gd->bd->bi_dram[i].start = kw_sdram_bar(i); - gd->bd->bi_dram[i].size = kw_sdram_bs(i); gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i), kw_sdram_bs(i)); } diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index 5fa0153e3b..8cb0fe834d 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -49,6 +49,7 @@ /* include common defines/options for all Keymile boards */ #include "keymile-common.h" +#define CONFIG_SYS_TEXT_BASE 0x04000000 /* code address after reloc */ #define CONFIG_ENV_SIZE (128 << 10) /* NAND chip block size */ #define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */ #define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ diff --git a/include/configs/mgcoge2un.h b/include/configs/mgcoge2un.h index 9f5464b138..d3c7bdcddf 100644 --- a/include/configs/mgcoge2un.h +++ b/include/configs/mgcoge2un.h @@ -44,12 +44,14 @@ #define CONFIG_HOSTNAME mgcoge2un +#define KM_IVM_BUS "pca9547:70:9" /* I2C2 (Mux-Port 1)*/ +#define KM_ENV_BUS "pca9547:70:d" /* I2C2 (Mux-Port 5)*/ + /* * Default environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_KM_DEF_ENV \ - "memsize=0x8000000\0" \ "newenv=setenv addr 0x100000 && " \ "i2c dev 1; mw.b ${addr} 0 4 && " \ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ @@ -57,7 +59,7 @@ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ "rootpath=/opt/eldk/arm\0" \ - "EEprom_ivm=pca9547:70:9\0" \ + "EEprom_ivm=" KM_IVM_BUS "\0" \ "" #endif /* _CONFIG_MGCOGE2UN_H */ diff --git a/include/configs/suen3.h b/include/configs/suen3.h index 87f524a1b8..2b6f19ee0c 100644 --- a/include/configs/suen3.h +++ b/include/configs/suen3.h @@ -43,12 +43,14 @@ #define CONFIG_HOSTNAME suen3 +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ +#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ + /* * Default environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_KM_DEF_ENV \ - "memsize=0x8000000\0" \ "newenv=setenv addr 0x100000 && " \ "i2c dev 1; mw.b ${addr} 0 4 && " \ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ @@ -56,7 +58,7 @@ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ "rootpath=/opt/eldk/arm\0" \ - "EEprom_ivm=pca9544a:70:9\0" \ + "EEprom_ivm=" KM_IVM_BUS "\0" \ "" #endif /* _CONFIG_SUEN3_H */ diff --git a/include/configs/suen8.h b/include/configs/suen8.h index cdda4af13b..3f60bc33f0 100644 --- a/include/configs/suen8.h +++ b/include/configs/suen8.h @@ -44,12 +44,14 @@ #define CONFIG_HOSTNAME suen8 +#define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/ +#define KM_ENV_BUS "pca9544a:70:d" /* I2C2 (Mux-Port 5)*/ + /* * Default environment variables */ #define CONFIG_EXTRA_ENV_SETTINGS \ CONFIG_KM_DEF_ENV \ - "memsize=0x8000000\0" \ "newenv=setenv addr 0x100000 && " \ "i2c dev 1; mw.b ${addr} 0 4 && " \ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ @@ -57,7 +59,7 @@ "eeprom write " xstr(CONFIG_SYS_DEF_EEPROM_ADDR) \ " ${addr} " xstr(CONFIG_ENV_OFFSET_REDUND) " 4\0" \ "rootpath=/opt/eldk/arm\0" \ - "EEprom_ivm=pca9544a:70:9\0" \ + "EEprom_ivm=" KM_IVM_BUS "\0" \ "" #endif /* _CONFIG_SUEN8_H */