From: Øyvind Harboe <oyvind.harboe@zylin.com>
Date: Mon, 6 Dec 2010 08:21:23 +0000 (+0100)
Subject: jtag: getting the JTAG speed can fail
X-Git-Tag: v0.5.0-rc1~291
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=740b9e25b410c164e661d0334a9ea4168406726b;p=openocd

jtag: getting the JTAG speed can fail

If the JTAG speed has not been set, then it has no defined
value, add code to propagate the error.

No change to actual behavior as no new failure paths have
been introduced. This is a no-op patch to make subsequent patches
smaller.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
---

diff --git a/src/jtag/core.c b/src/jtag/core.c
index c1b64bba..b8953094 100644
--- a/src/jtag/core.c
+++ b/src/jtag/core.c
@@ -1384,9 +1384,13 @@ int adapter_init(struct command_context *cmd_ctx)
 
 	int requested_khz = jtag_get_speed_khz();
 	int actual_khz = requested_khz;
-	int retval = jtag_get_speed_readable(&actual_khz);
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	if (retval != ERROR_OK)
+		return retval;
+	retval = jtag_get_speed_readable(&actual_khz);
 	if (ERROR_OK != retval)
-		LOG_INFO("adapter-specific clock speed value %d", jtag_get_speed());
+		LOG_INFO("adapter-specific clock speed value %d", jtag_speed_var);
 	else if (actual_khz)
 	{
 		/* Adaptive clocking -- JTAG-specific */
@@ -1632,30 +1636,33 @@ int jtag_config_rclk(unsigned fallback_speed_khz)
 	return (ERROR_OK != retval) ? retval : jtag_set_speed(speed);
 }
 
-int jtag_get_speed(void)
+int jtag_get_speed(int *speed)
 {
-	int speed = 0; /* avoid -O3 warning */
 	switch(clock_mode)
 	{
 		case CLOCK_MODE_SPEED:
-			speed = jtag_speed;
+			*speed = jtag_speed;
 			break;
 		case CLOCK_MODE_KHZ:
-			adapter_khz_to_speed(jtag_get_speed_khz(), &speed);
+			adapter_khz_to_speed(jtag_get_speed_khz(), speed);
 			break;
 		case CLOCK_MODE_RCLK:
-			jtag_rclk_to_speed(rclk_fallback_speed_khz, &speed);
+			jtag_rclk_to_speed(rclk_fallback_speed_khz, speed);
 			break;
 		default:
 			LOG_ERROR("BUG: unknown jtag clock mode");
-			break;
+			return ERROR_FAIL;
 	}
-	return speed;
+	return ERROR_OK;
 }
 
 int jtag_get_speed_readable(int *khz)
 {
-	return jtag ? jtag->speed_div(jtag_get_speed(), khz) : ERROR_OK;
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	if (retval != ERROR_OK)
+		return retval;
+	return jtag ? jtag->speed_div(jtag_speed_var, khz) : ERROR_OK;
 }
 
 void jtag_set_verify(bool enable)
diff --git a/src/jtag/drivers/amt_jtagaccel.c b/src/jtag/drivers/amt_jtagaccel.c
index fca8cfe3..552d04d2 100644
--- a/src/jtag/drivers/amt_jtagaccel.c
+++ b/src/jtag/drivers/amt_jtagaccel.c
@@ -191,7 +191,8 @@ static void amt_jtagaccel_state_move(void)
 
 	aw_scan_tms_5 = 0x40 | (tms_scan[0] & 0x1f);
 	AMT_AW(aw_scan_tms_5);
-	int jtag_speed = jtag_get_speed();
+	int retval = jtag_get_speed(&jtag_speed);
+	assert(retval == ERROR_OK);
 	if (jtag_speed > 3 || rtck_enabled)
 		amt_wait_scan_busy();
 
@@ -249,7 +250,9 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
 	uint8_t dr_tdo;
 	uint8_t aw_tms_scan;
 	uint8_t tms_scan[2];
-	int jtag_speed = jtag_get_speed();
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	assert(retval == ERROR_OK);
 
 	if (ir_scan)
 		amt_jtagaccel_end_state(TAP_IRSHIFT);
@@ -267,7 +270,7 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
 
 		dw_tdi_scan = buf_get_u32(buffer, bit_count, (scan_size - 1) % 8) & 0xff;
 		AMT_DW(dw_tdi_scan);
-		if (jtag_speed > 3 || rtck_enabled)
+		if (jtag_speed_var > 3 || rtck_enabled)
 			amt_wait_scan_busy();
 
 		if ((type == SCAN_IN) || (type == SCAN_IO))
@@ -285,7 +288,7 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
 	{
 		dw_tdi_scan = buf_get_u32(buffer, bit_count, 8) & 0xff;
 		AMT_DW(dw_tdi_scan);
-		if (jtag_speed > 3 || rtck_enabled)
+		if (jtag_speed_var > 3 || rtck_enabled)
 			amt_wait_scan_busy();
 
 		if ((type == SCAN_IN) || (type == SCAN_IO))
@@ -302,7 +305,7 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
 	tms_scan[1] = amt_jtagaccel_tap_move[tap_move_ndx(tap_get_state())][tap_move_ndx(tap_get_end_state())][1];
 	aw_tms_scan = 0x40 | (tms_scan[0] & 0x1f) | (buf_get_u32(buffer, bit_count, 1) << 5);
 	AMT_AW(aw_tms_scan);
-	if (jtag_speed > 3 || rtck_enabled)
+	if (jtag_speed_var > 3 || rtck_enabled)
 		amt_wait_scan_busy();
 
 	if ((type == SCAN_IN) || (type == SCAN_IO))
@@ -316,7 +319,7 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
 	{
 		aw_tms_scan = 0x40 | (tms_scan[1] & 0x1f);
 		AMT_AW(aw_tms_scan);
-		if (jtag_speed > 3 || rtck_enabled)
+		if (jtag_speed_var > 3 || rtck_enabled)
 			amt_wait_scan_busy();
 	}
 	tap_set_state(tap_get_end_state());
@@ -502,7 +505,9 @@ static int amt_jtagaccel_init(void)
 	aw_control_fsm |= 0x04;
 	AMT_AW(aw_control_fsm);
 
-	amt_jtagaccel_speed(jtag_get_speed());
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	amt_jtagaccel_speed(jtag_speed_var);
 
 	enum reset_types jtag_reset_config = jtag_get_reset_config();
 	if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
diff --git a/src/jtag/drivers/ft2232.c b/src/jtag/drivers/ft2232.c
index 928ec1c6..77b5880b 100644
--- a/src/jtag/drivers/ft2232.c
+++ b/src/jtag/drivers/ft2232.c
@@ -2395,7 +2395,11 @@ static int ft2232_init(void)
 			return ERROR_JTAG_INIT_FAILED;
 	}
 
-	ft2232_speed(jtag_get_speed());
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	if (retval != ERROR_OK)
+		return retval;
+	ft2232_speed(jtag_speed_var);
 
 	buf[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */
 	if ((retval = ft2232_write(buf, 1, &bytes_written)) != ERROR_OK)
diff --git a/src/jtag/drivers/gw16012.c b/src/jtag/drivers/gw16012.c
index cb29d33a..17292994 100644
--- a/src/jtag/drivers/gw16012.c
+++ b/src/jtag/drivers/gw16012.c
@@ -529,7 +529,11 @@ static int gw16012_init(void)
 	gw16012_input(&status_port);
 	gw16012_msb = (status_port & 0x80) ^ 0x80;
 
-	gw16012_speed(jtag_get_speed());
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	if (retval != ERROR_OK)
+		return retval;
+	gw16012_speed(jtag_speed_var);
 	gw16012_reset(0, 0);
 
 	return ERROR_OK;
diff --git a/src/jtag/drivers/jlink.c b/src/jtag/drivers/jlink.c
index ff389e9e..e7e3ced9 100644
--- a/src/jtag/drivers/jlink.c
+++ b/src/jtag/drivers/jlink.c
@@ -321,7 +321,11 @@ static int jlink_init(void)
 	jlink_reset(0, 0);
 	jtag_sleep(3000);
 	jlink_tap_init();
-	jlink_speed(jtag_get_speed());
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	if (retval != ERROR_OK)
+		return retval;
+	jlink_speed(jtag_speed_var);
 
 	/* v5/6 jlink seems to have an issue if the first tap move
 	 * is not divisible by 8, so we send a TLR on first power up */
diff --git a/src/jtag/drivers/parport.c b/src/jtag/drivers/parport.c
index 2323ec56..3402bc2a 100644
--- a/src/jtag/drivers/parport.c
+++ b/src/jtag/drivers/parport.c
@@ -384,7 +384,9 @@ static int parport_init(void)
 
 	bitbang_interface = &parport_bitbang;
 
-	wait_states = jtag_get_speed();
+	int retval = jtag_get_speed(&wait_states);
+	if (retval != ERROR_OK)
+		return retval;
 
 	return ERROR_OK;
 }
@@ -475,7 +477,9 @@ COMMAND_HANDLER(parport_handle_parport_toggling_time_command)
 		}
 
 		parport_toggling_time_ns = ns;
-		wait_states = jtag_get_speed();
+		int retval = jtag_get_speed(&wait_states);
+		if (retval != ERROR_OK)
+			return retval;
 	}
 
 	command_print(CMD_CTX, "parport toggling time = %" PRIu32 " ns",
diff --git a/src/jtag/drivers/presto.c b/src/jtag/drivers/presto.c
index 10bed272..ca6e9d50 100644
--- a/src/jtag/drivers/presto.c
+++ b/src/jtag/drivers/presto.c
@@ -770,7 +770,11 @@ static int presto_jtag_init(void)
 	LOG_INFO("PRESTO open, serial number '%s'", presto->serial);
 
 	/* use JTAG speed setting from configuration file */
-	presto_jtag_speed(jtag_get_speed());
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	if (retval != ERROR_OK)
+		return retval;
+	presto_jtag_speed(jtag_speed_var);
 
 	bitq_interface = &presto_bitq;
 	return ERROR_OK;
diff --git a/src/jtag/drivers/rlink.c b/src/jtag/drivers/rlink.c
index dde117b0..a3fad358 100644
--- a/src/jtag/drivers/rlink.c
+++ b/src/jtag/drivers/rlink.c
@@ -1771,7 +1771,11 @@ int rlink_init(void)
 
 	tap_state_queue_init();
 	dtc_queue_init();
-	rlink_speed(jtag_get_speed());
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	if (retval != ERROR_OK)
+		return retval;
+	rlink_speed(jtag_speed_var);
 	rlink_reset(0, 0);
 
 	return ERROR_OK;
diff --git a/src/jtag/drivers/usb_blaster.c b/src/jtag/drivers/usb_blaster.c
index 16790405..c9b88f86 100644
--- a/src/jtag/drivers/usb_blaster.c
+++ b/src/jtag/drivers/usb_blaster.c
@@ -442,7 +442,11 @@ static int usb_blaster_init(void)
 
 	bitbang_interface = &usb_blaster_bitbang;
 
-	usb_blaster_speed(jtag_get_speed());
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	if (retval != ERROR_OK)
+		return retval;
+	usb_blaster_speed(jtag_speed_var);
 
 #if 0
 #if BUILD_USB_BLASTER_FTD2XX == 1
diff --git a/src/jtag/jtag.h b/src/jtag/jtag.h
index d6e49e0a..db7cd5c9 100644
--- a/src/jtag/jtag.h
+++ b/src/jtag/jtag.h
@@ -239,7 +239,7 @@ int jtag_call_event_callbacks(enum jtag_event event);
 
 
 /// @returns The current JTAG speed setting.
-int jtag_get_speed(void);
+int jtag_get_speed(int *speed);
 
 /**
  * Given a @a speed setting, use the interface @c speed_div callback to
diff --git a/src/jtag/zy1000/zy1000.c b/src/jtag/zy1000/zy1000.c
index c8bee2f5..69fa4dc8 100644
--- a/src/jtag/zy1000/zy1000.c
+++ b/src/jtag/zy1000/zy1000.c
@@ -1620,7 +1620,11 @@ int zy1000_init(void)
 
 	 /* deassert resets. Important to avoid infinite loop waiting for SRST to deassert */
 	zy1000_reset(0, 0);
-	zy1000_speed(jtag_get_speed());
+	int jtag_speed_var;
+	int retval = jtag_get_speed(&jtag_speed_var);
+	if (retval != ERROR_OK)
+		return retval;
+	zy1000_speed(jtag_speed_var);
 
 
 #if BUILD_ECOSBOARD