From: Ibai Erkiaga Date: Tue, 22 May 2018 16:03:04 +0000 (+0100) Subject: arm: zynq: Add initial support for Avnet MiniZed X-Git-Tag: v2018.07-rc1~14^2~12 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7483969c550a931aa7b2441025a99c2fc878582e;p=u-boot arm: zynq: Add initial support for Avnet MiniZed Initial support for Avnet MiniZed board. Tested UART1 (serial console), QSPI(Flash), SDHCI1 (eMMC), USB. Signed-off-by: Ibai Erkiaga Signed-off-by: Michal Simek --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a0349a8975..197639c405 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -130,6 +130,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-cc108.dtb \ zynq-cse-qspi-single.dtb \ zynq-microzed.dtb \ + zynq-minized.dtb \ zynq-picozed.dtb \ zynq-syzygy-hub.dtb \ zynq-topic-miami.dtb \ diff --git a/arch/arm/dts/zynq-minized.dts b/arch/arm/dts/zynq-minized.dts new file mode 100644 index 0000000000..525921ee7b --- /dev/null +++ b/arch/arm/dts/zynq-minized.dts @@ -0,0 +1,106 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * dts file for Avnet MiniZed board + * + * (C) Copyright 2017 - 2018, Xilinx, Inc. + * + * Ibai Erkiaga + */ + +/dts-v1/; +#include "zynq-7000.dtsi" + +/ { + model = "Avnet Zynq MiniZed Development Board"; + compatible = "avnet,minized", "xlnx,zynq-7000"; + + aliases { + serial0 = &uart1; + serial1 = &uart0; + spi0 = &qspi; + mmc0 = &sdhci0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + chosen { + bootargs = ""; + stdout-path = "serial0:115200n8"; + }; + + usb_phy0: phy0 { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + }; +}; + +&qspi { + status = "okay"; + is-dual = <0>; + num-cs = <1>; + flash@0 { + compatible = "micron,m25p128"; + reg = <0x0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "boot"; + reg = <0x0 0xff0000>; + }; + + partition@270000 { + label = "kernel"; + reg = <0x270000 0xd80000>; + }; + + partition@ff0000 { + label = "bootenv"; + reg = <0xff0000 0x10000>; + }; + + partition@1000000 { + label = "spare"; + reg = <0x1000000 0x0>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + u-boot,dm-pre-reloc; + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; + usb-phy = <&usb_phy0>; + usb-reset = <&gpio0 7 0>; /* USB_RST_N-MIO7 */ +}; + +&sdhci1 { + status = "okay"; + non-removable; + bus-width = <4>; + max-frequency = <12000000>; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + broken-hpi; + }; +}; diff --git a/configs/zynq_minized_defconfig b/configs/zynq_minized_defconfig new file mode 100644 index 0000000000..8cf3215837 --- /dev/null +++ b/configs/zynq_minized_defconfig @@ -0,0 +1,66 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQ=y +CONFIG_SYS_TEXT_BASE=0x4000000 +CONFIG_SPL=y +CONFIG_SPL_STACK_R_ADDR=0x200000 +CONFIG_DEFAULT_DEVICE_TREE="zynq-minized" +CONFIG_DEBUG_UART=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_FIT_VERBOSE=y +CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd" +CONFIG_SPL_STACK_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SYS_PROMPT="Zynq> " +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y +CONFIG_DM_GPIO=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_XILINX=y +CONFIG_ZYNQ_GEM=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_BASE=0xe0001000 +CONFIG_DEBUG_UART_CLOCK=50000000 +CONFIG_ZYNQ_SERIAL=y +CONFIG_ZYNQ_QSPI=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03fd +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_THOR=y