From: Paul Fertser Date: Wed, 30 Nov 2016 09:51:35 +0000 (+0300) Subject: tcl: target: imx5{1,3}: remove bogus tapenable command X-Git-Tag: v0.10.0-rc1~5 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7582e2fd281153a9a7c9318a3dda010efd2a13ed;p=openocd tcl: target: imx5{1,3}: remove bogus tapenable command This seems to be a leftover from borrowing from omap3* configs. Since SJC is not enabling or disabling the DAP tap, and the tap is always available, the extra tapenable command causes warnings on startup (can't enable what's already enabled). Change-Id: I7514436d565aa5b91876dbdab547956f36dcab77 Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/3892 Tested-by: jenkins --- diff --git a/tcl/target/imx51.cfg b/tcl/target/imx51.cfg index b143aad2..d10cf9f5 100644 --- a/tcl/target/imx51.cfg +++ b/tcl/target/imx51.cfg @@ -36,9 +36,6 @@ target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.DAP # some TCK tycles are required to activate the DEBUG power domain jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100" -# have the DAP "always" be active -jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP" - proc imx51_dbginit {target} { # General Cortex-A8 debug initialisation cortex_a dbginit diff --git a/tcl/target/imx53.cfg b/tcl/target/imx53.cfg index 87a3008e..5ad6473a 100644 --- a/tcl/target/imx53.cfg +++ b/tcl/target/imx53.cfg @@ -36,9 +36,6 @@ target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.DAP # some TCK tycles are required to activate the DEBUG power domain jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100" -# have the DAP "always" be active -jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP" - proc imx53_dbginit {target} { # General Cortex-A8 debug initialisation cortex_a dbginit