From: Songjun Wu Date: Tue, 11 Apr 2017 08:33:30 +0000 (+0800) Subject: at91: video: Support driver-model for the HLCD driver X-Git-Tag: v2017.05-rc2~3^2~2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7927831e21a1ec2f44e0e0eb142ca24be807d202;p=u-boot at91: video: Support driver-model for the HLCD driver Add driver-model support to this driver. Signed-off-by: Songjun Wu --- diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index d1b017cfad..19e97452bd 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -371,6 +371,12 @@ config DISPLAY The devices provide a simple interface to start up the display, read display information and enable it. +config ATMEL_HLCD + bool "Enable ATMEL video support using HLCDC" + depends on DM_VIDEO + help + HLCDC supports video output to an attached LCD panel. + config VIDEO_BROADWELL_IGD bool "Enable Intel Broadwell integrated graphics device" depends on X86 diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c index 960b474b76..59b9c45616 100644 --- a/drivers/video/atmel_hlcdfb.c +++ b/drivers/video/atmel_hlcdfb.c @@ -10,13 +10,22 @@ #include #include #include +#include +#include +#include #include +#include +#include #include #if defined(CONFIG_LCD_LOGO) #include #endif +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_DM_VIDEO + /* configurable parameters */ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 #define ATMEL_LCDC_DMA_BURST_LEN 8 @@ -26,19 +35,16 @@ #define ATMEL_LCDC_FIFO_SIZE 512 -#define lcdc_readl(reg) __raw_readl((reg)) -#define lcdc_writel(reg, val) __raw_writel((val), (reg)) - /* * the CLUT register map as following * RCLUT(24 ~ 16), GCLUT(15 ~ 8), BCLUT(7 ~ 0) */ void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) { - lcdc_writel(((red << LCDC_BASECLUT_RCLUT_Pos) & LCDC_BASECLUT_RCLUT_Msk) - | ((green << LCDC_BASECLUT_GCLUT_Pos) & LCDC_BASECLUT_GCLUT_Msk) - | ((blue << LCDC_BASECLUT_BCLUT_Pos) & LCDC_BASECLUT_BCLUT_Msk), - panel_info.mmio + ATMEL_LCDC_LUT(regno)); + writel(panel_info.mmio + ATMEL_LCDC_LUT(regno), + ((red << LCDC_BASECLUT_RCLUT_Pos) & LCDC_BASECLUT_RCLUT_Msk) + | ((green << LCDC_BASECLUT_GCLUT_Pos) & LCDC_BASECLUT_GCLUT_Msk) + | ((blue << LCDC_BASECLUT_BCLUT_Pos) & LCDC_BASECLUT_BCLUT_Msk)); } ushort *configuration_get_cmap(void) @@ -55,6 +61,7 @@ void lcd_ctrl_init(void *lcdbase) unsigned long value; struct lcd_dma_desc *desc; struct atmel_hlcd_regs *regs; + int ret; if (!has_lcdc()) return; /* No lcdc */ @@ -62,21 +69,29 @@ void lcd_ctrl_init(void *lcdbase) regs = (struct atmel_hlcd_regs *)panel_info.mmio; /* Disable DISP signal */ - lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_DISPDIS); - while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS)) - udelay(1); + writel(LCDC_LCDDIS_DISPDIS, ®s->lcdc_lcddis); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS, + false, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); /* Disable synchronization */ - lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_SYNCDIS); - while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS)) - udelay(1); + writel(LCDC_LCDDIS_SYNCDIS, ®s->lcdc_lcddis); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS, + false, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); /* Disable pixel clock */ - lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_CLKDIS); - while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS)) - udelay(1); + writel(LCDC_LCDDIS_CLKDIS, ®s->lcdc_lcddis); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS, + false, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); /* Disable PWM */ - lcdc_writel(®s->lcdc_lcddis, LCDC_LCDDIS_PWMDIS); - while ((lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS)) - udelay(1); + writel(LCDC_LCDDIS_PWMDIS, ®s->lcdc_lcddis); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS, + false, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); /* Set pixel clock */ value = get_lcdc_clk_rate(0) / panel_info.vl_clk; @@ -85,23 +100,23 @@ void lcd_ctrl_init(void *lcdbase) if (value < 1) { /* Using system clock as pixel clock */ - lcdc_writel(®s->lcdc_lcdcfg0, - LCDC_LCDCFG0_CLKDIV(0) - | LCDC_LCDCFG0_CGDISHCR - | LCDC_LCDCFG0_CGDISHEO - | LCDC_LCDCFG0_CGDISOVR1 - | LCDC_LCDCFG0_CGDISBASE - | panel_info.vl_clk_pol - | LCDC_LCDCFG0_CLKSEL); + writel(LCDC_LCDCFG0_CLKDIV(0) + | LCDC_LCDCFG0_CGDISHCR + | LCDC_LCDCFG0_CGDISHEO + | LCDC_LCDCFG0_CGDISOVR1 + | LCDC_LCDCFG0_CGDISBASE + | panel_info.vl_clk_pol + | LCDC_LCDCFG0_CLKSEL, + ®s->lcdc_lcdcfg0); } else { - lcdc_writel(®s->lcdc_lcdcfg0, - LCDC_LCDCFG0_CLKDIV(value - 2) - | LCDC_LCDCFG0_CGDISHCR - | LCDC_LCDCFG0_CGDISHEO - | LCDC_LCDCFG0_CGDISOVR1 - | LCDC_LCDCFG0_CGDISBASE - | panel_info.vl_clk_pol); + writel(LCDC_LCDCFG0_CLKDIV(value - 2) + | LCDC_LCDCFG0_CGDISHCR + | LCDC_LCDCFG0_CGDISHEO + | LCDC_LCDCFG0_CGDISOVR1 + | LCDC_LCDCFG0_CGDISBASE + | panel_info.vl_clk_pol, + ®s->lcdc_lcdcfg0); } /* Initialize control register 5 */ @@ -134,50 +149,50 @@ void lcd_ctrl_init(void *lcdbase) value |= LCDC_LCDCFG5_GUARDTIME(ATMEL_LCDC_GUARD_TIME); value |= (LCDC_LCDCFG5_DISPDLY | LCDC_LCDCFG5_VSPDLYS); - lcdc_writel(®s->lcdc_lcdcfg5, value); + writel(value, ®s->lcdc_lcdcfg5); /* Vertical & Horizontal Timing */ value = LCDC_LCDCFG1_VSPW(panel_info.vl_vsync_len - 1); value |= LCDC_LCDCFG1_HSPW(panel_info.vl_hsync_len - 1); - lcdc_writel(®s->lcdc_lcdcfg1, value); + writel(value, ®s->lcdc_lcdcfg1); value = LCDC_LCDCFG2_VBPW(panel_info.vl_upper_margin); value |= LCDC_LCDCFG2_VFPW(panel_info.vl_lower_margin - 1); - lcdc_writel(®s->lcdc_lcdcfg2, value); + writel(value, ®s->lcdc_lcdcfg2); value = LCDC_LCDCFG3_HBPW(panel_info.vl_left_margin - 1); value |= LCDC_LCDCFG3_HFPW(panel_info.vl_right_margin - 1); - lcdc_writel(®s->lcdc_lcdcfg3, value); + writel(value, ®s->lcdc_lcdcfg3); /* Display size */ value = LCDC_LCDCFG4_RPF(panel_info.vl_row - 1); value |= LCDC_LCDCFG4_PPL(panel_info.vl_col - 1); - lcdc_writel(®s->lcdc_lcdcfg4, value); + writel(value, ®s->lcdc_lcdcfg4); - lcdc_writel(®s->lcdc_basecfg0, - LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO); + writel(LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO, + ®s->lcdc_basecfg0); switch (NBITS(panel_info.vl_bpix)) { case 16: - lcdc_writel(®s->lcdc_basecfg1, - LCDC_BASECFG1_RGBMODE_16BPP_RGB_565); + writel(LCDC_BASECFG1_RGBMODE_16BPP_RGB_565, + ®s->lcdc_basecfg1); break; case 32: - lcdc_writel(®s->lcdc_basecfg1, - LCDC_BASECFG1_RGBMODE_24BPP_RGB_888); + writel(LCDC_BASECFG1_RGBMODE_24BPP_RGB_888, + ®s->lcdc_basecfg1); break; default: BUG(); break; } - lcdc_writel(®s->lcdc_basecfg2, LCDC_BASECFG2_XSTRIDE(0)); - lcdc_writel(®s->lcdc_basecfg3, 0); - lcdc_writel(®s->lcdc_basecfg4, LCDC_BASECFG4_DMA); + writel(LCDC_BASECFG2_XSTRIDE(0), ®s->lcdc_basecfg2); + writel(0, ®s->lcdc_basecfg3); + writel(LCDC_BASECFG4_DMA, ®s->lcdc_basecfg4); /* Disable all interrupts */ - lcdc_writel(®s->lcdc_lcdidr, ~0UL); - lcdc_writel(®s->lcdc_baseidr, ~0UL); + writel(~0UL, ®s->lcdc_lcdidr); + writel(~0UL, ®s->lcdc_baseidr); /* Setup the DMA descriptor, this descriptor will loop to itself */ desc = (struct lcd_dma_desc *)(lcdbase - 16); @@ -191,30 +206,355 @@ void lcd_ctrl_init(void *lcdbase) /* Flush the DMA descriptor if we enabled dcache */ flush_dcache_range((u32)desc, (u32)desc + sizeof(*desc)); - lcdc_writel(®s->lcdc_baseaddr, desc->address); - lcdc_writel(®s->lcdc_basectrl, desc->control); - lcdc_writel(®s->lcdc_basenext, desc->next); - lcdc_writel(®s->lcdc_basecher, LCDC_BASECHER_CHEN | - LCDC_BASECHER_UPDATEEN); + writel(desc->address, ®s->lcdc_baseaddr); + writel(desc->control, ®s->lcdc_basectrl); + writel(desc->next, ®s->lcdc_basenext); + writel(LCDC_BASECHER_CHEN | LCDC_BASECHER_UPDATEEN, + ®s->lcdc_basecher); /* Enable LCD */ - value = lcdc_readl(®s->lcdc_lcden); - lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_CLKEN); - while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_CLKSTS)) - udelay(1); - value = lcdc_readl(®s->lcdc_lcden); - lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_SYNCEN); - while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_LCDSTS)) - udelay(1); - value = lcdc_readl(®s->lcdc_lcden); - lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_DISPEN); - while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_DISPSTS)) - udelay(1); - value = lcdc_readl(®s->lcdc_lcden); - lcdc_writel(®s->lcdc_lcden, value | LCDC_LCDEN_PWMEN); - while (!(lcdc_readl(®s->lcdc_lcdsr) & LCDC_LCDSR_PWMSTS)) - udelay(1); + value = readl(®s->lcdc_lcden); + writel(value | LCDC_LCDEN_CLKEN, ®s->lcdc_lcden); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS, + true, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); + value = readl(®s->lcdc_lcden); + writel(value | LCDC_LCDEN_SYNCEN, ®s->lcdc_lcden); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS, + true, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); + value = readl(®s->lcdc_lcden); + writel(value | LCDC_LCDEN_DISPEN, ®s->lcdc_lcden); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS, + true, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); + value = readl(®s->lcdc_lcden); + writel(value | LCDC_LCDEN_PWMEN, ®s->lcdc_lcden); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS, + true, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); /* Enable flushing if we enabled dcache */ lcd_set_flush_dcache(1); } + +#else + +enum { + LCD_MAX_WIDTH = 1024, + LCD_MAX_HEIGHT = 768, + LCD_MAX_LOG2_BPP = VIDEO_BPP16, +}; + +struct atmel_hlcdc_priv { + struct atmel_hlcd_regs *regs; + struct display_timing timing; + unsigned int vl_bpix; + unsigned int output_mode; + unsigned int guard_time; + ulong clk_rate; +}; + +static int at91_hlcdc_enable_clk(struct udevice *dev) +{ + struct atmel_hlcdc_priv *priv = dev_get_priv(dev); + struct clk clk; + ulong clk_rate; + int ret; + + ret = clk_get_by_index(dev, 0, &clk); + if (ret) + return -EINVAL; + + ret = clk_enable(&clk); + if (ret) + return ret; + + clk_rate = clk_get_rate(&clk); + if (!clk_rate) { + clk_disable(&clk); + return -ENODEV; + } + + priv->clk_rate = clk_rate; + + clk_free(&clk); + + return 0; +} + +static void atmel_hlcdc_init(struct udevice *dev) +{ + struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev); + struct atmel_hlcdc_priv *priv = dev_get_priv(dev); + struct atmel_hlcd_regs *regs = priv->regs; + struct display_timing *timing = &priv->timing; + struct lcd_dma_desc *desc; + unsigned long value, vl_clk_pol; + int ret; + + /* Disable DISP signal */ + writel(LCDC_LCDDIS_DISPDIS, ®s->lcdc_lcddis); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS, + false, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); + /* Disable synchronization */ + writel(LCDC_LCDDIS_SYNCDIS, ®s->lcdc_lcddis); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS, + false, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); + /* Disable pixel clock */ + writel(LCDC_LCDDIS_CLKDIS, ®s->lcdc_lcddis); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS, + false, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); + /* Disable PWM */ + writel(LCDC_LCDDIS_PWMDIS, ®s->lcdc_lcddis); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS, + false, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); + + /* Set pixel clock */ + value = priv->clk_rate / timing->pixelclock.typ; + if (priv->clk_rate % timing->pixelclock.typ) + value++; + + vl_clk_pol = 0; + if (timing->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) + vl_clk_pol = LCDC_LCDCFG0_CLKPOL; + + if (value < 1) { + /* Using system clock as pixel clock */ + writel(LCDC_LCDCFG0_CLKDIV(0) + | LCDC_LCDCFG0_CGDISHCR + | LCDC_LCDCFG0_CGDISHEO + | LCDC_LCDCFG0_CGDISOVR1 + | LCDC_LCDCFG0_CGDISBASE + | vl_clk_pol + | LCDC_LCDCFG0_CLKSEL, + ®s->lcdc_lcdcfg0); + + } else { + writel(LCDC_LCDCFG0_CLKDIV(value - 2) + | LCDC_LCDCFG0_CGDISHCR + | LCDC_LCDCFG0_CGDISHEO + | LCDC_LCDCFG0_CGDISOVR1 + | LCDC_LCDCFG0_CGDISBASE + | vl_clk_pol, + ®s->lcdc_lcdcfg0); + } + + /* Initialize control register 5 */ + value = 0; + + if (!(timing->flags & DISPLAY_FLAGS_HSYNC_HIGH)) + value |= LCDC_LCDCFG5_HSPOL; + if (!(timing->flags & DISPLAY_FLAGS_VSYNC_HIGH)) + value |= LCDC_LCDCFG5_VSPOL; + + switch (priv->output_mode) { + case 12: + value |= LCDC_LCDCFG5_MODE_OUTPUT_12BPP; + break; + case 16: + value |= LCDC_LCDCFG5_MODE_OUTPUT_16BPP; + break; + case 18: + value |= LCDC_LCDCFG5_MODE_OUTPUT_18BPP; + break; + case 24: + value |= LCDC_LCDCFG5_MODE_OUTPUT_24BPP; + break; + default: + BUG(); + break; + } + + value |= LCDC_LCDCFG5_GUARDTIME(priv->guard_time); + value |= (LCDC_LCDCFG5_DISPDLY | LCDC_LCDCFG5_VSPDLYS); + writel(value, ®s->lcdc_lcdcfg5); + + /* Vertical & Horizontal Timing */ + value = LCDC_LCDCFG1_VSPW(timing->vsync_len.typ - 1); + value |= LCDC_LCDCFG1_HSPW(timing->hsync_len.typ - 1); + writel(value, ®s->lcdc_lcdcfg1); + + value = LCDC_LCDCFG2_VBPW(timing->vback_porch.typ); + value |= LCDC_LCDCFG2_VFPW(timing->vfront_porch.typ - 1); + writel(value, ®s->lcdc_lcdcfg2); + + value = LCDC_LCDCFG3_HBPW(timing->hback_porch.typ - 1); + value |= LCDC_LCDCFG3_HFPW(timing->hfront_porch.typ - 1); + writel(value, ®s->lcdc_lcdcfg3); + + /* Display size */ + value = LCDC_LCDCFG4_RPF(timing->vactive.typ - 1); + value |= LCDC_LCDCFG4_PPL(timing->hactive.typ - 1); + writel(value, ®s->lcdc_lcdcfg4); + + writel(LCDC_BASECFG0_BLEN_AHB_INCR4 | LCDC_BASECFG0_DLBO, + ®s->lcdc_basecfg0); + + switch (VNBITS(priv->vl_bpix)) { + case 16: + writel(LCDC_BASECFG1_RGBMODE_16BPP_RGB_565, + ®s->lcdc_basecfg1); + break; + case 32: + writel(LCDC_BASECFG1_RGBMODE_24BPP_RGB_888, + ®s->lcdc_basecfg1); + break; + default: + BUG(); + break; + } + + writel(LCDC_BASECFG2_XSTRIDE(0), ®s->lcdc_basecfg2); + writel(0, ®s->lcdc_basecfg3); + writel(LCDC_BASECFG4_DMA, ®s->lcdc_basecfg4); + + /* Disable all interrupts */ + writel(~0UL, ®s->lcdc_lcdidr); + writel(~0UL, ®s->lcdc_baseidr); + + /* Setup the DMA descriptor, this descriptor will loop to itself */ + desc = (struct lcd_dma_desc *)(uc_plat->base - 16); + + desc->address = (u32)uc_plat->base; + + /* Disable DMA transfer interrupt & descriptor loaded interrupt. */ + desc->control = LCDC_BASECTRL_ADDIEN | LCDC_BASECTRL_DSCRIEN + | LCDC_BASECTRL_DMAIEN | LCDC_BASECTRL_DFETCH; + desc->next = (u32)desc; + + /* Flush the DMA descriptor if we enabled dcache */ + flush_dcache_range((u32)desc, (u32)desc + sizeof(*desc)); + + writel(desc->address, ®s->lcdc_baseaddr); + writel(desc->control, ®s->lcdc_basectrl); + writel(desc->next, ®s->lcdc_basenext); + writel(LCDC_BASECHER_CHEN | LCDC_BASECHER_UPDATEEN, + ®s->lcdc_basecher); + + /* Enable LCD */ + value = readl(®s->lcdc_lcden); + writel(value | LCDC_LCDEN_CLKEN, ®s->lcdc_lcden); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_CLKSTS, + true, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); + value = readl(®s->lcdc_lcden); + writel(value | LCDC_LCDEN_SYNCEN, ®s->lcdc_lcden); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_LCDSTS, + true, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); + value = readl(®s->lcdc_lcden); + writel(value | LCDC_LCDEN_DISPEN, ®s->lcdc_lcden); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_DISPSTS, + true, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); + value = readl(®s->lcdc_lcden); + writel(value | LCDC_LCDEN_PWMEN, ®s->lcdc_lcden); + ret = wait_for_bit(__func__, ®s->lcdc_lcdsr, LCDC_LCDSR_PWMSTS, + true, 1000, false); + if (ret) + printf("%s: %d: Timeout!\n", __func__, __LINE__); +} + +static int atmel_hlcdc_probe(struct udevice *dev) +{ + struct video_priv *uc_priv = dev_get_uclass_priv(dev); + struct atmel_hlcdc_priv *priv = dev_get_priv(dev); + int ret; + + ret = at91_hlcdc_enable_clk(dev); + if (ret) + return ret; + + atmel_hlcdc_init(dev); + + uc_priv->xsize = priv->timing.hactive.typ; + uc_priv->ysize = priv->timing.vactive.typ; + uc_priv->bpix = priv->vl_bpix; + + /* Enable flushing if we enabled dcache */ + video_set_flush_dcache(dev, true); + + return 0; +} + +static int atmel_hlcdc_ofdata_to_platdata(struct udevice *dev) +{ + struct atmel_hlcdc_priv *priv = dev_get_priv(dev); + const void *blob = gd->fdt_blob; + int node = dev->of_offset; + + priv->regs = (struct atmel_hlcd_regs *)dev_get_addr(dev); + if (!priv->regs) { + debug("%s: No display controller address\n", __func__); + return -EINVAL; + } + + if (fdtdec_decode_display_timing(blob, dev->of_offset, + 0, &priv->timing)) { + debug("%s: Failed to decode display timing\n", __func__); + return -EINVAL; + } + + if (priv->timing.hactive.typ > LCD_MAX_WIDTH) + priv->timing.hactive.typ = LCD_MAX_WIDTH; + + if (priv->timing.vactive.typ > LCD_MAX_HEIGHT) + priv->timing.vactive.typ = LCD_MAX_HEIGHT; + + priv->vl_bpix = fdtdec_get_int(blob, node, "atmel,vl-bpix", 0); + if (!priv->vl_bpix) { + debug("%s: Failed to get bits per pixel\n", __func__); + return -EINVAL; + } + + priv->output_mode = fdtdec_get_int(blob, node, "atmel,output-mode", 24); + priv->guard_time = fdtdec_get_int(blob, node, "atmel,guard-time", 1); + + return 0; +} + +static int atmel_hlcdc_bind(struct udevice *dev) +{ + struct video_uc_platdata *uc_plat = dev_get_uclass_platdata(dev); + + uc_plat->size = LCD_MAX_WIDTH * LCD_MAX_HEIGHT * + (1 << LCD_MAX_LOG2_BPP) / 8; + + debug("%s: Frame buffer size %x\n", __func__, uc_plat->size); + + return 0; +} + +static const struct udevice_id atmel_hlcdc_ids[] = { + { .compatible = "atmel,sama5d2-hlcdc" }, + { .compatible = "atmel,at91sam9x5-hlcdc" }, + { } +}; + +U_BOOT_DRIVER(atmel_hlcdfb) = { + .name = "atmel_hlcdfb", + .id = UCLASS_VIDEO, + .of_match = atmel_hlcdc_ids, + .bind = atmel_hlcdc_bind, + .probe = atmel_hlcdc_probe, + .ofdata_to_platdata = atmel_hlcdc_ofdata_to_platdata, + .priv_auto_alloc_size = sizeof(struct atmel_hlcdc_priv), +}; + +#endif