From: Simon Glass Date: Fri, 22 Jan 2016 02:43:36 +0000 (-0700) Subject: rockchip: Use pwrseq for MMC start-up on jerry X-Git-Tag: v2016.03-rc1~224 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=79d020ee74241251c0888a3badae9666e457eb6d;p=u-boot rockchip: Use pwrseq for MMC start-up on jerry This is defined in the device tree in Linux. Copy over the settings so that this can be used instead of hard-coding the reset line. Signed-off-by: Simon Glass --- diff --git a/arch/arm/dts/rk3288-veyron.dtsi b/arch/arm/dts/rk3288-veyron.dtsi index 7e37158fc3..12404ff76b 100644 --- a/arch/arm/dts/rk3288-veyron.dtsi +++ b/arch/arm/dts/rk3288-veyron.dtsi @@ -106,6 +106,13 @@ priority = /bits/ 8 <200>; }; + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; + }; + sound { compatible = "rockchip,rockchip-audio-max98090"; rockchip,model = "ROCKCHIP-I2S"; @@ -259,11 +266,12 @@ bus-width = <8>; cap-mmc-highspeed; mmc-hs200-1_8v; + mmc-pwrseq = <&emmc_pwrseq>; disable-wp; non-removable; num-slots = <1>; pinctrl-names = "default"; - pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_deassert_reset>; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_pwr>; status = "okay"; }; @@ -671,9 +679,8 @@ }; emmc { - /* Make sure eMMC is not in reset */ - emmc_deassert_reset: emmc-deassert-reset { - rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_up>; + emmc_reset: emmc-reset { + rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>; }; /* diff --git a/configs/chromebook_jerry_defconfig b/configs/chromebook_jerry_defconfig index 39cd9d696b..456b6ea290 100644 --- a/configs/chromebook_jerry_defconfig +++ b/configs/chromebook_jerry_defconfig @@ -23,6 +23,7 @@ CONFIG_SYS_I2C_ROCKCHIP=y CONFIG_LED=y CONFIG_SPL_LED=y CONFIG_LED_GPIO=y +CONFIG_PWRSEQ=y CONFIG_RESET=y CONFIG_DM_MMC=y CONFIG_ROCKCHIP_DWMMC=y diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 238711a699..f47573b25c 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -26,6 +26,7 @@ #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) #define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT