From: Vasily Khoruzhick Date: Fri, 27 Oct 2017 04:51:51 +0000 (-0700) Subject: sunxi: video: split out PLL configuration code X-Git-Tag: v2017.11-rc3~4^2~3 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=79f285ddebea204eedefb4cb4bfe4a2710138fa3;p=u-boot sunxi: video: split out PLL configuration code It will be reused in new DM LCD driver. Signed-off-by: Vasily Khoruzhick --- diff --git a/arch/arm/include/asm/arch-sunxi/lcdc.h b/arch/arm/include/asm/arch-sunxi/lcdc.h index a751698b4f..132c480106 100644 --- a/arch/arm/include/asm/arch-sunxi/lcdc.h +++ b/arch/arm/include/asm/arch-sunxi/lcdc.h @@ -124,5 +124,8 @@ void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const lcdc, void lcdc_tcon1_mode_set(struct sunxi_lcdc_reg * const lcdc, const struct display_timing *mode, bool ext_hvsync, bool is_composite); +void lcdc_pll_set(struct sunxi_ccm_reg * const ccm, int tcon, + int dotclock, int *clk_div, int *clk_double, + bool is_composite); #endif /* _LCDC_H */ diff --git a/drivers/video/sunxi/lcdc.c b/drivers/video/sunxi/lcdc.c index 7d215b713e..4cb86fb7ff 100644 --- a/drivers/video/sunxi/lcdc.c +++ b/drivers/video/sunxi/lcdc.c @@ -10,6 +10,7 @@ #include +#include #include #include @@ -100,7 +101,7 @@ void lcdc_tcon0_mode_set(struct sunxi_lcdc_reg * const lcdc, writel(SUNXI_LCDC_TCON0_TIMING_V_TOTAL(total) | SUNXI_LCDC_TCON0_TIMING_V_BP(bp), &lcdc->tcon0_timing_v); -#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL +#if defined(CONFIG_VIDEO_LCD_IF_PARALLEL) || defined(CONFIG_VIDEO_DE2) writel(SUNXI_LCDC_X(mode->hsync_len.typ) | SUNXI_LCDC_Y(mode->vsync_len.typ), &lcdc->tcon0_timing_sync); @@ -207,3 +208,122 @@ void lcdc_tcon1_mode_set(struct sunxi_lcdc_reg * const lcdc, SUNXI_LCDC_MUX_CTRL_SRC0(1)); #endif } + +void lcdc_pll_set(struct sunxi_ccm_reg *ccm, int tcon, int dotclock, + int *clk_div, int *clk_double, bool is_composite) +{ + int value, n, m, min_m, max_m, diff; + int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF; + int best_double = 0; + bool use_mipi_pll = false; + + if (tcon == 0) { +#if defined(CONFIG_VIDEO_LCD_IF_PARALLEL) || defined(CONFIG_SUNXI_DE2) + min_m = 6; + max_m = 127; +#endif +#ifdef CONFIG_VIDEO_LCD_IF_LVDS + min_m = 7; + max_m = 7; +#endif + } else { + min_m = 1; + max_m = 15; + } + + /* + * Find the lowest divider resulting in a matching clock, if there + * is no match, pick the closest lower clock, as monitors tend to + * not sync to higher frequencies. + */ + for (m = min_m; m <= max_m; m++) { +#ifndef CONFIG_SUNXI_DE2 + n = (m * dotclock) / 3000; + + if ((n >= 9) && (n <= 127)) { + value = (3000 * n) / m; + diff = dotclock - value; + if (diff < best_diff) { + best_diff = diff; + best_m = m; + best_n = n; + best_double = 0; + } + } + + /* These are just duplicates */ + if (!(m & 1)) + continue; +#endif + + /* No double clock on DE2 */ + n = (m * dotclock) / 6000; + if ((n >= 9) && (n <= 127)) { + value = (6000 * n) / m; + diff = dotclock - value; + if (diff < best_diff) { + best_diff = diff; + best_m = m; + best_n = n; + best_double = 1; + } + } + } + +#ifdef CONFIG_MACH_SUN6I + /* + * Use the MIPI pll if we've been unable to find any matching setting + * for PLL3, this happens with high dotclocks because of min_m = 6. + */ + if (tcon == 0 && best_n == 0) { + use_mipi_pll = true; + best_m = 6; /* Minimum m for tcon0 */ + } + + if (use_mipi_pll) { + clock_set_pll3(297000000); /* Fix the video pll at 297 MHz */ + clock_set_mipi_pll(best_m * dotclock * 1000); + debug("dotclock: %dkHz = %dkHz via mipi pll\n", + dotclock, clock_get_mipi_pll() / best_m / 1000); + } else +#endif + { + clock_set_pll3(best_n * 3000000); + debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n", + dotclock, + (best_double + 1) * clock_get_pll3() / best_m / 1000, + best_double + 1, best_n, best_m); + } + + if (tcon == 0) { + u32 pll; + + if (use_mipi_pll) + pll = CCM_LCD_CH0_CTRL_MIPI_PLL; + else if (best_double) + pll = CCM_LCD_CH0_CTRL_PLL3_2X; + else + pll = CCM_LCD_CH0_CTRL_PLL3; +#ifndef CONFIG_SUNXI_DE2 + writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll, + &ccm->lcd0_ch0_clk_cfg); +#else + writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll, + &ccm->lcd0_clk_cfg); +#endif + } +#ifndef CONFIG_SUNXI_DE2 + else { + writel(CCM_LCD_CH1_CTRL_GATE | + (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X : + CCM_LCD_CH1_CTRL_PLL3) | + CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg); + if (is_composite) + setbits_le32(&ccm->lcd0_ch1_clk_cfg, + CCM_LCD_CH1_CTRL_HALF_SCLK1); + } +#endif + + *clk_div = best_m; + *clk_double = best_double; +} diff --git a/drivers/video/sunxi/sunxi_display.c b/drivers/video/sunxi/sunxi_display.c index 7f25ed5f26..0630289c0a 100644 --- a/drivers/video/sunxi/sunxi_display.c +++ b/drivers/video/sunxi/sunxi_display.c @@ -516,119 +516,6 @@ static void sunxi_composer_enable(void) setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START); } -/* - * LCDC, what allwinner calls a CRTC, so timing controller and serializer. - */ -static void sunxi_lcdc_pll_set(int tcon, int dotclock, - int *clk_div, int *clk_double) -{ - struct sunxi_ccm_reg * const ccm = - (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; - int value, n, m, min_m, max_m, diff; - int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF; - int best_double = 0; - bool use_mipi_pll = false; - - if (tcon == 0) { -#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL - min_m = 6; - max_m = 127; -#endif -#ifdef CONFIG_VIDEO_LCD_IF_LVDS - min_m = max_m = 7; -#endif - } else { - min_m = 1; - max_m = 15; - } - - /* - * Find the lowest divider resulting in a matching clock, if there - * is no match, pick the closest lower clock, as monitors tend to - * not sync to higher frequencies. - */ - for (m = min_m; m <= max_m; m++) { - n = (m * dotclock) / 3000; - - if ((n >= 9) && (n <= 127)) { - value = (3000 * n) / m; - diff = dotclock - value; - if (diff < best_diff) { - best_diff = diff; - best_m = m; - best_n = n; - best_double = 0; - } - } - - /* These are just duplicates */ - if (!(m & 1)) - continue; - - n = (m * dotclock) / 6000; - if ((n >= 9) && (n <= 127)) { - value = (6000 * n) / m; - diff = dotclock - value; - if (diff < best_diff) { - best_diff = diff; - best_m = m; - best_n = n; - best_double = 1; - } - } - } - -#ifdef CONFIG_MACH_SUN6I - /* - * Use the MIPI pll if we've been unable to find any matching setting - * for PLL3, this happens with high dotclocks because of min_m = 6. - */ - if (tcon == 0 && best_n == 0) { - use_mipi_pll = true; - best_m = 6; /* Minimum m for tcon0 */ - } - - if (use_mipi_pll) { - clock_set_pll3(297000000); /* Fix the video pll at 297 MHz */ - clock_set_mipi_pll(best_m * dotclock * 1000); - debug("dotclock: %dkHz = %dkHz via mipi pll\n", - dotclock, clock_get_mipi_pll() / best_m / 1000); - } else -#endif - { - clock_set_pll3(best_n * 3000000); - debug("dotclock: %dkHz = %dkHz: (%d * 3MHz * %d) / %d\n", - dotclock, - (best_double + 1) * clock_get_pll3() / best_m / 1000, - best_double + 1, best_n, best_m); - } - - if (tcon == 0) { - u32 pll; - - if (use_mipi_pll) - pll = CCM_LCD_CH0_CTRL_MIPI_PLL; - else if (best_double) - pll = CCM_LCD_CH0_CTRL_PLL3_2X; - else - pll = CCM_LCD_CH0_CTRL_PLL3; - - writel(CCM_LCD_CH0_CTRL_GATE | CCM_LCD_CH0_CTRL_RST | pll, - &ccm->lcd0_ch0_clk_cfg); - } else { - writel(CCM_LCD_CH1_CTRL_GATE | - (best_double ? CCM_LCD_CH1_CTRL_PLL3_2X : - CCM_LCD_CH1_CTRL_PLL3) | - CCM_LCD_CH1_CTRL_M(best_m), &ccm->lcd0_ch1_clk_cfg); - if (sunxi_is_composite()) - setbits_le32(&ccm->lcd0_ch1_clk_cfg, - CCM_LCD_CH1_CTRL_HALF_SCLK1); - } - - *clk_div = best_m; - *clk_double = best_double; -} - static void sunxi_lcdc_init(void) { struct sunxi_ccm_reg * const ccm = @@ -755,6 +642,8 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode, { struct sunxi_lcdc_reg * const lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; int clk_div, clk_double, pin; struct display_timing timing; @@ -774,7 +663,8 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode, #endif } - sunxi_lcdc_pll_set(0, mode->pixclock_khz, &clk_div, &clk_double); + lcdc_pll_set(ccm, 0, mode->pixclock_khz, &clk_div, &clk_double, + sunxi_is_composite()); sunxi_ctfb_mode_to_display_timing(mode, &timing); lcdc_tcon0_mode_set(lcdc, &timing, clk_div, for_ext_vga_dac, @@ -788,6 +678,8 @@ static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode, { struct sunxi_lcdc_reg * const lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE; + struct sunxi_ccm_reg * const ccm = + (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; struct display_timing timing; sunxi_ctfb_mode_to_display_timing(mode, &timing); @@ -799,7 +691,8 @@ static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode, sunxi_gpio_set_cfgpin(SUNXI_GPD(27), SUNXI_GPD_LCD0); } - sunxi_lcdc_pll_set(1, mode->pixclock_khz, clk_div, clk_double); + lcdc_pll_set(ccm, 1, mode->pixclock_khz, clk_div, clk_double, + sunxi_is_composite()); } #endif /* CONFIG_VIDEO_HDMI || defined CONFIG_VIDEO_VGA || CONFIG_VIDEO_COMPOSITE */