From: Peng Fan Date: Tue, 3 May 2016 02:02:22 +0000 (+0800) Subject: dm: spi: introduce dm api X-Git-Tag: v2016.07-rc1~203^2~75 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7a3eff4ce962de50bd9a1d83a9fce178c04999d3;p=u-boot dm: spi: introduce dm api Introduce dm_spi_claim_bus, dm_spi_release_bus and dm_spi_xfer Convert spi_claim_bus, spi_release_bus and spi_xfer to use the new API. Signed-off-by: Peng Fan Cc: Simon Glass Cc: Jagan Teki Acked-by: Simon Glass --- diff --git a/drivers/spi/spi-uclass.c b/drivers/spi/spi-uclass.c index 5561f36762..84b6786517 100644 --- a/drivers/spi/spi-uclass.c +++ b/drivers/spi/spi-uclass.c @@ -45,12 +45,12 @@ static int spi_set_speed_mode(struct udevice *bus, int speed, int mode) return 0; } -int spi_claim_bus(struct spi_slave *slave) +int dm_spi_claim_bus(struct udevice *dev) { - struct udevice *dev = slave->dev; struct udevice *bus = dev->parent; struct dm_spi_ops *ops = spi_get_ops(bus); struct dm_spi_bus *spi = dev_get_uclass_priv(bus); + struct spi_slave *slave = dev_get_parent_priv(dev); int speed; int ret; @@ -73,9 +73,8 @@ int spi_claim_bus(struct spi_slave *slave) return ops->claim_bus ? ops->claim_bus(dev) : 0; } -void spi_release_bus(struct spi_slave *slave) +void dm_spi_release_bus(struct udevice *dev) { - struct udevice *dev = slave->dev; struct udevice *bus = dev->parent; struct dm_spi_ops *ops = spi_get_ops(bus); @@ -83,10 +82,9 @@ void spi_release_bus(struct spi_slave *slave) ops->release_bus(dev); } -int spi_xfer(struct spi_slave *slave, unsigned int bitlen, - const void *dout, void *din, unsigned long flags) +int dm_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) { - struct udevice *dev = slave->dev; struct udevice *bus = dev->parent; if (bus->uclass->uc_drv->id != UCLASS_SPI) @@ -95,6 +93,22 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, return spi_get_ops(bus)->xfer(dev, bitlen, dout, din, flags); } +int spi_claim_bus(struct spi_slave *slave) +{ + return dm_spi_claim_bus(slave->dev); +} + +void spi_release_bus(struct spi_slave *slave) +{ + dm_spi_release_bus(slave->dev); +} + +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, + const void *dout, void *din, unsigned long flags) +{ + return dm_spi_xfer(slave->dev, bitlen, dout, din, flags); +} + static int spi_post_bind(struct udevice *dev) { /* Scan the bus for devices */ diff --git a/include/spi.h b/include/spi.h index 4b88d3986e..ca96fa4b31 100644 --- a/include/spi.h +++ b/include/spi.h @@ -612,6 +612,58 @@ int sandbox_spi_get_emul(struct sandbox_state *state, struct udevice *bus, struct udevice *slave, struct udevice **emulp); +/** + * Claim the bus and prepare it for communication with a given slave. + * + * This must be called before doing any transfers with a SPI slave. It + * will enable and initialize any SPI hardware as necessary, and make + * sure that the SCK line is in the correct idle state. It is not + * allowed to claim the same bus for several slaves without releasing + * the bus in between. + * + * @dev: The SPI slave device + * + * Returns: 0 if the bus was claimed successfully, or a negative value + * if it wasn't. + */ +int dm_spi_claim_bus(struct udevice *dev); + +/** + * Release the SPI bus + * + * This must be called once for every call to dm_spi_claim_bus() after + * all transfers have finished. It may disable any SPI hardware as + * appropriate. + * + * @slave: The SPI slave device + */ +void dm_spi_release_bus(struct udevice *dev); + +/** + * SPI transfer + * + * This writes "bitlen" bits out the SPI MOSI port and simultaneously clocks + * "bitlen" bits in the SPI MISO port. That's just the way SPI works. + * + * The source of the outgoing bits is the "dout" parameter and the + * destination of the input bits is the "din" parameter. Note that "dout" + * and "din" can point to the same memory location, in which case the + * input data overwrites the output data (since both are buffered by + * temporary variables, this is OK). + * + * dm_spi_xfer() interface: + * @dev: The SPI slave device which will be sending/receiving the data. + * @bitlen: How many bits to write and read. + * @dout: Pointer to a string of bits to send out. The bits are + * held in a byte array and are sent MSB first. + * @din: Pointer to a string of bits that will be filled in. + * @flags: A bitwise combination of SPI_XFER_* flags. + * + * Returns: 0 on success, not 0 on failure + */ +int dm_spi_xfer(struct udevice *dev, unsigned int bitlen, + const void *dout, void *din, unsigned long flags); + /* Access the operations for a SPI device */ #define spi_get_ops(dev) ((struct dm_spi_ops *)(dev)->driver->ops) #define spi_emul_get_ops(dev) ((struct dm_spi_emul_ops *)(dev)->driver->ops)