From: Marian Balakowicz Date: Thu, 27 Apr 2006 17:12:19 +0000 (+0200) Subject: Add support for Freescale M5271: Merge with /work/u-boot.mcf5271 X-Git-Tag: LABEL_2006_05_19_1133~15^2~6 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7a635e004ec12bd2a0bae9f90fbb5769b524a42e;p=u-boot Add support for Freescale M5271: Merge with /work/u-boot.mcf5271 --- 7a635e004ec12bd2a0bae9f90fbb5769b524a42e diff --cc CHANGELOG index c479e5da5b,6379cc4585..7483fa605c --- a/CHANGELOG +++ b/CHANGELOG @@@ -2,473 -2,15 +2,482 @@@ Changes since U-Boot 1.1.4: ====================================================================== +* Added support for BC3450 board + Patch by Stefan Strobl, 21. Oct 2005 + +* Update for NC650 board: + - Support rev1 and rev2 hardware + - adapt to new NAND layer + - add CP850 configuration based on NC650 + +* MPC5200: enable snooping of DMA transactions on XLB even if no PCI + is configured; othrwise DMA accesses aren't cache coherent which + causes for example USB to fail. + +* Some code cleanup + +* Fix dbau1x00 boards broken by dbau1550 patch + PLL:s were not set for boards other than 1550. + Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST. + Default boot is now bootp for cards other than 1550. + Patch by Thomas Lange, 10 Aug 2005 + +* Fixes common/cmd_flash.c: + - fix some compiler/parser error, if using m68k tool chain + - optical fix for protect on/off all messages, if using more + then one bank + Patch by Jens Scharsig, 28 Jul 2005 + +* Fix Quad UART mapping on MCC200 board due to new HW revision + +* Fix JFFS2 support for legacy NAND driver. + +* Remove dependencies between DoC code and old legacy NAND driver. + +* Fix PM828_PCI target, for which PCI was *not* configured in. + +* Fix Lite5200B support: initialize SDelay register + See Freescale's AN3221 "MPC5200B SDRAM Initialization and + Configuration", 3.3.1 SDelay--MBAR + 0x0190 + +* Changes/fixes for drivers/cfi_flash.c: + + - Add Intel legacy lock/unlock support to common CFI driver + + On some Intel flash's (e.g. Intel J3) legacy unlocking is + supported, meaning that unlocking of one sector will unlock + all sectors of this bank. Using this feature, unlocking + of all sectors upon startup (via env var "unlock=yes") will + get much faster. + + - Fixed problem with multiple reads of envronment variable + "unlock" as pointed out by Reinhard Arlt & Anders Larsen. + + - Removed unwanted linefeeds from "protect" command when + CFG_FLASH_PROTECTION is enabled. + + - Changed p3p400 board to use CFG_FLASH_PROTECTION + + Patch by Stefan Roese, 01 Apr 2006 + +* Changes/fixes for drivers/cfi_flash.c: + - Correctly handle the cases where CFG_HZ != 1000 (several + XScale-based boards) + - Fix the timeout calculation of buffered writes (off by a + factor of 1000) + Patch by Anders Larsen, 31 Mar 2006 + +* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440) + + 405 SDRAM: - The SDRAM parameters can now be defined in the board + config file and the 405 SDRAM controller values will + be calculated upon bootup (see PPChameleonEVB). + When those settings are not defined in the board + config file, the register setup will be as it is now, + so this implementation should not break any current + design using this code. + + Thanks to Andrea Marson from DAVE for this patch. + + 440 DDR: - Added function sdram_tr1_set to auto calculate the + TR1 value for the DDR. + - Added ECC support (see p3p440). + + Patch by Stefan Roese, 17 Mar 2006 + +* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S + Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473] + +* Add support for ymodem protocol download + Patch by Stefano Babic, 29 Mar 2006 + +* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000 + Merge from Markus Klotzbücher's repo, 01 Apr 2006 + +* GCC-4.x fixes: clean up global data pointer initialization for all + boards + +* Update for Delta board: + - redundant NAND environment + - misc Monahans cleanups (remove dead code etc.) + - DA9030 Initialization; some minimal changes to PXA I2C driver to + make it work with the Monahans. + - Make Monahans clock frequency configurable using + CFG_MONAHANS_RUN_MODE_OSC_RATIO and + CFG_MONAHANS_TURBO_RUN_MODE_RATIO. + Merge from Markus Klotzbücher's repo, 25 Mar 2006 + +* Enable Quad UART om MCC200 board. + +* Cleanup MCC200 board configuration; omit non-existent stuff. + +* Add support for MPC859/866 Rev. A.0 + +* Add command for handling DDR ECC registers on MPC8349EE MDS board. + +* Fix DDR ECC bit definitions for MPC83xx. + +* Add initial support for MPC8349E MDS board. + +* Add support for ECC DDR initialization on MPC83xx. + +* Add DMA support for MPC83xx. + +* Add sync in do_reset() routine for MPC83xx after RPR register + was written to. It is need on some targets when BAT translation + is enabled. + +* Add bit definitions for MPC83xx DDR controller registers. + +* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx. + +* Correct shift offsets in icache_status and dcache_status for MPC83xx. + +* Add support for DS1374 RTC chip. + +* Add support for Lite5200B board. + Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006 + +* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific + timer and cpu_reset code from cpu/$(CPU) into the new + cpu/$(CPU)/$(SOC) directories + Patch by Andreas Engel, 13 Mar 2006 + +* Change max size of uncompressed uImage's to 8MByte and add + CFG_BOOTM_LEN to adjust this setting. + + As mentioned by Robin Getz on 2005-05-24 the size of uncompressed + uImages was restricted to 4MBytes. This default size is now + increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN + in the board config file. + + Patch by Stefan Roese, 13 Mar 2006 + +* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c + Patch by Stefan Roese, 13 Mar 2006 + +* cpu/ppc4xx/start.S : exceptions are enabled after relocation + Patch by Cedric Vincent, 06 Jul 2005 + +* au1x00_eth.c: check malloc return value and abort if it failed + Patch by Andrew Dyer, 26 Jul 2005 + +* Change the sequence of events in soft_i2c.c:send_ack() to keep from + incorrectly generating start/stop conditions on the bus. + Patch by Andrew Dyer, 26 Jul 2005 + +* Fix bug in [id]cache_status commands for MPC85xx processors; + should look at LSB of L1CSRn registers to determine if L1 cache is + enabled, not the MSB. + Patch by Murray Jensen, 19 Jul 2005 + +* Fix array overflow with fw_setenv on uninitialised environment + Patch by Murray Jensen, 15 Jul 2005 + +* Add support for EmbeddedPlanet EP88x boards + Patch by Yuli Barcohen, 13 Jul 2005 + +* Remove board specific configuration includes from the common xilinx + ethernet and iic adapter code. + Patch by Michael Libeskind, 12 Jul 2005 + +* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver + Patch by Murray Jensen, 08 Jul 2005 + +* Add (some) definitions for the MPC85xx local bus controller + Patch by Murray Jensen, 08 Jul 2005 + +* Add CPM2 I/O pin functions for MPC85xx processors + Patch by Murray Jensen, 08 Jul 2005 + +* Fix compile problem + +* Added PCI support for MPC8349ADS board + Patch by Kumar Gala 11 Jan 2006 + +* Enable address translation on MPC83xx + Patch by Kumar Gala, 10 Feb 2006 + +* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx + Patch by Kumar Gala, 25 Jan 2006 + +* Fixed defines for MPC83xx SICRL register to match current specs + Patch by Kumar Gala, 23 Jan 2006 + +* Only disable the MPC83xx watchdog if its enabled out of reset. + If its disabled out of reset SW can later enable it if so desired + Patch by Kumar Gala, 11 Jan 2006 + +* Allow config of GPIO direction & data registers at boot on 83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Enable time handling on 83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Make System IO Config Registers board configurable on MPC83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Fixed PCI indirect config ops to handle multiple PCI controllers + We need to adjust the bus number we are trying to access based + on which PCI controller its on + Patch by Kumar Gala, 12 Jan 2006 + +* Report back PCI bus when doing table based device config + Patch by Kumar Gala, 11 Jan 2006 + +* Added support for PCI prefetchable region and BARs + If a host controller sets up a region as prefetchable and + a device's BAR denotes it as prefetchable, allocate the + BAR into the prefetch region. + + If a BAR is prefetchable and no prefetchable region has + been setup by the controller we fall back to allocating + the BAR into the normally memory region. + Patch by Kumar Gala, 11 Jan 2006 + +* Add helper function for generic flat device tree fixups for mpc83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Add support for passing initrd information via flat device tree + Patch by Kumar Gala, 11 Jan 2006 + +* Added OF_STDOUT_PATH and OF_SOC + + OF_STDOUT_PATH specifies the path to the device the kernel can use + for console output + + OF_SOC specifies the proper name of the SOC node if one exists. + Patch by Kumar Gala, 11 Jan 2006 + +* Allow board code to fixup the flat device tree before booting a kernel + Patch by Kumar Gala, 11 Jan 2006 + +* Added CONFIG_ options for bd_t and env in flat dev tree + + CONFIG_OF_HAS_BD_T will put a copy of the bd_t + into the resulting flat device tree. + + CONFIG_OF_HAS_UBOOT_ENV will copy the environment + variables from u-boot into the flat device tree + + Patch by Kumar Gala, 11 Jan 2006 + +* Add support for the DHCP vendor optional bootfile (#67). + Ignores the vendor TFTP server name option (#66). + Patch by Murray Jensen, 30 Jun 2005 + +* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode + Patch by Andy Fleming, 14 Jun 2005 + +* Fix bad register definitions for LTX971 PHY on MPC85xx boards. + Patch by Gerhard Jaeger, 21 Jun 2005 + +* Add netconsole and some more commands to RPXlite_DW board + Patch by Sam Song, 19 Jun 2005 + +* Fix bad declaration on pci_cfgfunc_nothing + Patch by Sam Song, 19 Jun 2005 + +* Adjust "echo" as a default command + Patch by Sam Song, 19 Jun 2005 + +* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC + Patch by KokHow Teh, 16 Jun 2005 + +* Add crc of data to jffs2 (in jffs2_1pass_build_lists()). + Patch by Rick Bronson, 15 Jun 2005 + +* Coding Style cleanup + +* Avoid dereferencing NULL in find_cmd() if no valid commands were found + Patch by Andrew Dyer, 13 Jun 2005 + +* Add ADI Blackfin support + - add support for Analog Devices Blackfin BF533 CPU + - add support for the ADI BF533 Stamp uClinux board + - add support for the ADI BF533 EZKit board + Patches by Richard Klingler, 11 Jun 2005 + +* Add loads of ntohl() in image header handling + Patch by Steven Scholz, 10 Jun 2005 + +* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment + variable to set clock + Patch by Yuli Barcohen, 05 Jun 2005 + +* RPXlite configuration fixes + - Use correct flash sector size + - Use correct memory test end address + - Add support for bzip2 compression + - Various small fixes + Patch by Yuli Barcohen, 05 Jun 2005 + +* Memory configuration changes for ZPC.1900 board + - Fix SDRAM timing on both local bus and 60x bus + - Add support for second flash bank (SIMM) + - Change boot flash base + Patch by Yuli Barcohen, 05 Jun 2005 + +* Add support for Adder boards with 16MB SDRAM; + add support for second FEC on Adder87x board. + Patch by Yuli Barcohen, 05 Jun 2005 + +* Fix conditional for including ks8695eth driver + Patch by Greg Ungerer, 04 Jun 2005 + +* Fix Makefile: include config.mk only after CROSS_COMPILE is defined + Patch by Friedrich Lobenstock, 02 Jun 2005 + +* Fix comment in common/soft_i2c.c + Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005 + +* Cleanup compiler warnings. + Patch by Greg Ungerer, 21 May 2005 + +* Word alignment fixes for word aligned NS16550 UART + Patch by Jean-Paul Saman, 01 Mar 2005 + + Fixes bug with UART that only supports word aligned access: removed + "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some + (broken!) versions of GCC generate byte accesses when encountering + the packed attribute regardless if the struct is already correctly + aligned for a platform. Peripherals that can only handle word + aligned access won't work properly when accessed with byte access. + The struct NS16550 is already word aligned for REG_SIZE = 4, so + there is no need to packed the struct in that case. + +* Fix behaviour if gatewayip is not set + Patch by Robin Gilks, 23 Dec 2004 + +* Fix cleanup for netstart board. + Remove build results from repository + +* Some code cleanup for GCC 4.x + +* Fixes to support environment in NAND flash; + enable NAND flash based environment for delta board. + +* Add support for Intel Monahans CPU on Zylonite and Delta boards + (This is Work in Progress!) + +* Add support for TQM8260-AI boards. + +* Minor code cleanup + +* Merge the new NAND code (testing-NAND brach); see doc/README.nand + Rewrite of NAND code based on what is in 2.6.12 Linux kernel + Patch by Ladislav Michl, 29 Jun 2005 + +* Add lowboot target to mcc200 board + Patch by Stefan Roese, 4 Mar 2006 + +* Fix problem with flash_get_size() from CFI driver update + Patch by Stefan Roese, 1 Mar 2006 + +* Make CFG_NO_FLASH work on ARM systems + Patch by Markus Klotzbuecher, 27 Feb 2006 + +* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock, + use hush shell. + +* Convert mcc200 to use common CFI flash driver + Patch by Stefan Roese, 28 Feb 2006 + +* Add env-variable "unlock" to handle initial state of sectors + (locked/unlocked). + + Only the U-Boot image and it's environment is protected, + all other sectors are unprotected (unlocked) if flash + hardware protection is used (CFG_FLASH_PROTECTION) and + the environment variable "unlock" is set to "yes". + + Patch by Stefan Roese, 28 Feb 2006 + +* Update drivers/cfi_flash.c: + - find_sector() called in both versions of flash_write_cfiword() + Patch by Peter Pearse, 27th Feb 2006 + +* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode + Patch by Jose Maria Lopez, 16 Jan 2006 + +* Add support for AMD/Spansion Flashes in flash_write_cfibuffer + Patch by Alex Bastos and Thomas Schaefer, 2005-08-29 + +* Changes/fixes for drivers/cfi_flash.c: + We *should* check if there are any error bits if the previous call + returned ERR_OK (Otherwise we will have output an error message in + flash_status_check() already.) The original code would only check for + error bits if flash_status_check() returns ERR_TIMEOUT. + Patch by Marcus Hall, 23 Aug 2005 + +* Changes/fixes for drivers/cfi_flash.c: + - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c + - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c + Patch by Sangmoon Kim, 19 Aug 2005 + +* Fixes for drivers/cfi_flash.c: + - Fix wrong timeout value usage in flash_status_check() + - Round write_tout up when converting to msec in flash_get_size() + - Remove clearing flash status at the end of flash_write_cfibuffer() + which sets Intel 28F640J3 flash back to command mode on CSB472 + Patch by Tolunay Orkun, 02 July 2005 + +* Add basic support for the SMMACO4 Board from PanDaCom. + Patch by Heiko Schocher, 20 Feb 2006 + +* Add GIT version information (commid ID) to untagged U-Boot versions + + As done in the linux kernel, the U-Boot version (U_BOOT_VERSION) + of all unreleased (untagged) U-Boot images will be automatically + extended upon compiletime with a part of the GIT commit ID and + possibly with "dirty" if uncommited changes are detected. + + Here an example for the resulting version: + "U-Boot 1.1.4-g3457ac18-dirty" + + The version is now maintained in the toplevel Makefile and the + version headers are autogenerated. + + Patch by Stefan Roese, 9 Feb 2006 + +* Update default environment for INKA4x00 board. + +* Convert CPCI750 to use common CFI flash driver + Patch by Reinhard Arlt, 8 Feb 2006 + +* Various changes to esd HH405 board specific files + Patch by Matthias Fuchs, 07 Feb 2006 + +* Cleanup U-Boot boot messages on ARM. + + To match the U-Boot user interface on ARM platforms to the U-Boot + standard (as on PPC platforms), some messages with debug character + are removed from the default U-Boot build. + Enable DEBUG for lib_arm/board.c to enable debug messages. + New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options. + Patch by Stefan Roese, 24 Jan 2006 + +* Fix various compiler warnings on ppc4xx builds (ELDK 4.0) + Patch by Stefan Roese, 18 Jan 2006 + +* Add VGA support (CT69000) to CPCI750 board. + Insert missing __le32_to_cpu() for filesize in ext2fs_read_file(). + Patch by Reinhard Arlt, 30 Dec 2005 + +* PMC405 and CPCI405: Moved configuration of pci resources + into config file. + PMC405 and CPCI2DP: Added firmware download and booting via pci. + Patch by Matthias Fuchs, 20 Dec 2005 + + * Add ColdFire targets to MAKEALL script + Patch by Zachary Landau, 26 Jan 2006 + + * Add support for r5200 board + Patch by Zachary Landau, 26 Jan 2006 + + * Add support for Freescale M5271 processor + Patch by Zachary Landau, 26 Jan 2006 + * Fix 28F256J3A support on PM520 board (without bank-switching only 32 MB can be accessed)