From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Date: Sat, 8 Dec 2007 15:34:08 +0000 (+0100)
Subject: IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x
X-Git-Tag: v1.3.2-rc1~102^2~49^2~20
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7b74ebe723e576baedf5a8b6240589b19b845a1b;p=u-boot

IXP: Add full baud-rate support for ixp42x, ixp45x and ixp46x

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
---

diff --git a/cpu/ixp/serial.c b/cpu/ixp/serial.c
index 2015958571..df379f380a 100644
--- a/cpu/ixp/serial.c
+++ b/cpu/ixp/serial.c
@@ -31,25 +31,22 @@
 #include <common.h>
 #include <asm/arch/ixp425.h>
 
+/*
+ *               14.7456 MHz
+ * Baud Rate = --------------
+ *              16 x Divisor
+ */
+#define SERIAL_CLOCK 921600 
+
 DECLARE_GLOBAL_DATA_PTR;
 
 void serial_setbrg (void)
 {
 	unsigned int quot = 0;
 	int uart = CFG_IXP425_CONSOLE;
-
-	if (gd->baudrate == 1200)
-		quot = 192;
-	else if (gd->baudrate == 9600)
-		quot = 96;
-	else if (gd->baudrate == 19200)
-		quot = 48;
-	else if (gd->baudrate == 38400)
-		quot = 24;
-	else if (gd->baudrate == 57600)
-		quot = 16;
-	else if (gd->baudrate == 115200)
-		quot = 8;
+	
+	if ((gd->baudrate <= SERIAL_CLOCK) && (SERIAL_CLOCK % gd->baudrate == 0))
+		quot = SERIAL_CLOCK / gd->baudrate;
 	else
 		hang ();
 
@@ -65,7 +62,6 @@ void serial_setbrg (void)
 	IER(uart) = IER_UUE;
 }
 
-
 /*
  * Initialise the serial port with the given baudrate. The settings
  * are always 8 data bits, no parity, 1 stop bit, no start bits.