From: cuz Date: Mon, 25 Mar 2002 06:06:52 +0000 (+0000) Subject: Straighten checking of the initialized flag in both, the C64 and C128 X-Git-Tag: V2.12.0~2408 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7d11fa012c468515b61868e3c1f2b06627543b36;p=cc65 Straighten checking of the initialized flag in both, the C64 and C128 versions of rs232.s. New include file common/rs232.inc, use the constants from this file instead of defining them separately in each platform specific rs232 module. git-svn-id: svn://svn.cc65.org/cc65/trunk@1208 b7a2c559-68d2-44c3-8de9-860c34a00d81 --- diff --git a/libsrc/atari/rs232.s b/libsrc/atari/rs232.s index d312caab0..67fa58a84 100644 --- a/libsrc/atari/rs232.s +++ b/libsrc/atari/rs232.s @@ -29,6 +29,7 @@ .include "atari.inc" .include "../common/errno.inc" + .include "../common/rs232.inc" .rodata @@ -130,17 +131,13 @@ cioerr: jsr fddecusage ; decrement usage counter of fd as open failed ; using 8 bit word size. So only 8 bit is currently tested. ; -; shouldn't this come from a "rs232.inc" ?? -ErrNotInitialized = $01 -ErrNoData = $04 - .proc _rs232_params sta tmp2 lda rshand cmp #$ff bne work ; work only if initialized - lda #ErrNotInitialized + lda #RS_ERR_NOT_INITIALIZED bne done work: lda rshand ldx #0 @@ -241,7 +238,7 @@ done: rts ldy rshand cpy #$ff bne work ; work only if initialized - lda #ErrNotInitialized + lda #RS_ERR_NOT_INITIALIZED bne nierr work: sta ptr1 @@ -267,7 +264,7 @@ go: ; check whether there is any input available beq nix_da ; no input waiting... ; input is available: get it! - + lda #GETCHR ; get raw bytes sta ICCOM,x ; in command code lda #0 @@ -282,11 +279,11 @@ go: ; check whether there is any input available sta (ptr1,x) ; return received byte txa rts - + nierr: ldx #0 rts -nix_da: lda #ErrNoData +nix_da: lda #RS_ERR_NO_DATA ldx #0 rts @@ -307,7 +304,7 @@ nix_da: lda #ErrNoData ldy rshand cpy #$ff bne work ; work only if initialized - lda #ErrNotInitialized + lda #RS_ERR_NOT_INITIALIZED bne nierr work: pha diff --git a/libsrc/c128/rs232.s b/libsrc/c128/rs232.s index 0c5d7cf5c..dd2695fac 100644 --- a/libsrc/c128/rs232.s +++ b/libsrc/c128/rs232.s @@ -25,9 +25,10 @@ .importzp ptr1, ptr2, tmp1, tmp2 .import popa, popax .export _rs232_init, _rs232_params, _rs232_done, _rs232_get - .export _rs232_put, _rs232_pause, _rs232_unpause, _rs232_status + .export _rs232_put, _rs232_pause, _rs232_unpause, _rs232_status .include "c128.inc" + .include "../common/rs232.inc" NmiExit = $ff33 ;exit address for nmi @@ -73,12 +74,6 @@ RegCommand = 2 ; Command register RegControl = 3 ; Control register RegClock = 7 ; Turbo232 external baud-rate generator -; Error codes. Beware: The codes must match the codes in the C header file -ErrNotInitialized = $01 -ErrBaudTooFast = $02 -ErrBaudNotAvail = $03 -ErrNoData = $04 -ErrOverflow = $05 .code @@ -170,11 +165,12 @@ _rs232_init: lda #$06 sta BaudCode -;** return - lda #$ff - sta Initialized - lda #$00 - tax +; Done + + ldx #$ff + stx Initialized + inx ; X = 0 + txa ; A = 0 rts ;---------------------------------------------------------------------------- @@ -197,9 +193,9 @@ _rs232_init: ; _rs232_params: - jsr CheckInitialized ;** check initialized - bcc @L1 - rts + bit Initialized + bmi @L1 + jmp NotInitialized ; Return an error code ; Save new parity @@ -221,8 +217,8 @@ _rs232_params: beq @L3 cpx #4 bcs @L3 -@L2: lda #ErrBaudTooFast - bne @L9 +@L2: lda #RS_ERR_BAUD_TOO_FAST + bne @L9 ; Set baud/parameters @@ -235,16 +231,16 @@ _rs232_params: lda HackBauds,x @L4: cmp #$ff bne @L5 - lda #ErrBaudNotAvail + lda #RS_ERR_BAUD_NOT_AVAIL bne @L9 @L5: tax and #$30 beq @L6 bit Turbo232 - bmi @L6 - lda #ErrBaudNotAvail - bne @L9 + bmi @L6 + lda #RS_ERR_BAUD_NOT_AVAIL + bne @L9 @L6: lda tmp1 and #$0f @@ -262,7 +258,7 @@ _rs232_params: beq @L7 lsr lsr - lsr + lsr lsr eor #%00000011 sta ACIA+RegClock @@ -322,7 +318,7 @@ _rs232_done: @L9: lda #$00 sta Initialized - tax + tax rts ;---------------------------------------------------------------------------- @@ -334,15 +330,14 @@ _rs232_done: ; _rs232_get: - jsr CheckInitialized ; Check if initialized - bcc @L1 - rts + bit Initialized + bpl NotInitialized ; Jump if not initialized ; Check for bytes to send @L1: sta ptr1 stx ptr1+1 ; Store pointer to received char - ldx SendFreeCnt + ldx SendFreeCnt cpx #$ff beq @L2 lda #$00 @@ -353,7 +348,7 @@ _rs232_get: @L2: lda RecvFreeCnt cmp #$ff bne @L3 - lda #ErrNoData + lda #RS_ERR_NO_DATA ldx #0 rts @@ -362,7 +357,7 @@ _rs232_get: @L3: ldx Stopped beq @L4 cmp #63 - bcc @L4 + bcc @L4 lda #$00 sta Stopped lda RtsOff @@ -374,12 +369,21 @@ _rs232_get: @L4: ldx RecvHead lda RecvBuf,x inc RecvHead - inc RecvFreeCnt + inc RecvFreeCnt ldx #$00 sta (ptr1,x) txa ; Return code = 0 rts +;---------------------------------------------------------------------------- +; +; RS232 module not initialized + +NotInitialized: + lda #RS_ERR_NOT_INITIALIZED + rts + ;---------------------------------------------------------------------------- ; ; unsigned char __fastcall__ rs232_put (char B); @@ -390,9 +394,8 @@ _rs232_get: ; _rs232_put: - jsr CheckInitialized ; Check initialized - bcc @L1 - rts + bit Initialized + bpl NotInitialized ; Jump if not initialized ; Try to send @@ -402,14 +405,14 @@ _rs232_put: pha lda #$00 jsr TryToSend - pla + pla ; Put byte into send buffer & send @L2: ldx SendFreeCnt bne @L3 - lda #ErrOverflow - ldx #$00 + lda #RS_ERR_OVERFLOW + ldx #$00 rts @L3: ldx SendTail @@ -429,10 +432,8 @@ _rs232_put: ; _rs232_pause: -; Check initialized - jsr CheckInitialized - bcc @L1 - rts + bit Initialized + bpl NotInitialized ; Jump if not initialized ; Assert flow control @@ -442,7 +443,7 @@ _rs232_pause: ; Delay for flow stop to be received - ldx BaudCode + ldx BaudCode lda PauseTimes,x jsr DelayMs @@ -472,17 +473,15 @@ PauseTimes: ; _rs232_unpause: -; Check initialized - jsr CheckInitialized - bcc @L1 - rts + bit Initialized + bpl NotInitialized ; Jump if not initialized ; Re-enable rx interrupts & release flow control @L1: lda #$00 sta Stopped lda RtsOff - ora #%00001000 + ora #%00001000 sta ACIA+RegCommand ; Poll for stalled char & exit @@ -500,17 +499,18 @@ _rs232_unpause: ; _rs232_status: - sta ptr2 - stx ptr2+1 - jsr popax - sta ptr1 - stx ptr1+1 - jsr CheckInitialized - bcs @L9 + sta ptr2 + stx ptr2+1 + jsr popax + sta ptr1 + stx ptr1+1 + bit Initialized + bmi @L1 + jmp NotInitialized ; Get status - lda ACIA+RegStatus +@L1: lda ACIA+RegStatus ldy #0 sta (ptr1),y jsr PollReceive ; bug-recovery hack @@ -535,14 +535,14 @@ _rs232_status: ; Because of the C128 banking, the NMI handler must go into the non banked ; memory, since the ROM NMI entry point will switch to a configuration where ; only the lowest 16K of RAM are visible. We will place the NMI handler into -; it's own segment and map this segment into the lower 16K in the linker +; it's own segment and map this segment into the lower 16K in the linker ; config. - + .segment "NMI" NmiHandler: lda #CC65_MMU_CFG ;(2) - sta MMU_CR ;(4) + sta MMU_CR ;(4) lda ACIA+RegStatus ;(4) ;status ;check for byte received and #$08 ;(2) beq @L9 ;(2*) @@ -580,27 +580,9 @@ NmiHandler: @L4: jmp NmiExit @L9: jmp NmiContinue - -.code -;---------------------------------------------------------------------------- -; -; CheckInitialized - internal check if initialized -; Set carry and an error code if not initialized, clear carry and do not -; change any registers if initialized. -; - -CheckInitialized: - bit Initialized - bmi @L1 - lda #ErrNotInitialized - ldx #0 - sec - rts - -@L1: clc - rts +.code ;---------------------------------------------------------------------------- ; Try to send a byte. Internal routine. A = TryHard diff --git a/libsrc/c64/rs232.s b/libsrc/c64/rs232.s index b2c8ecdf6..c47b35907 100644 --- a/libsrc/c64/rs232.s +++ b/libsrc/c64/rs232.s @@ -28,6 +28,7 @@ .export _rs232_put, _rs232_pause, _rs232_unpause, _rs232_status .include "c64.inc" + .include "../common/rs232.inc" NmiExit = $febc ;exit address for nmi @@ -73,12 +74,6 @@ RegCommand = 2 ; Command register RegControl = 3 ; Control register RegClock = 7 ; Turbo232 external baud-rate generator -; Error codes. Beware: The codes must match the codes in the C header file -ErrNotInitialized = $01 -ErrBaudTooFast = $02 -ErrBaudNotAvail = $03 -ErrNoData = $04 -ErrOverflow = $05 .code @@ -167,11 +162,12 @@ _rs232_init: lda #$06 sta BaudCode -;** return - lda #$ff - sta Initialized - lda #$00 - tax +; Done + + ldx #$ff + stx Initialized + inx ; X = 0 + txa ; A = 0 rts ;---------------------------------------------------------------------------- @@ -194,9 +190,9 @@ _rs232_init: ; _rs232_params: - jsr CheckInitialized ;** check initialized - bcc @L1 - rts + bit Initialized + bmi @L1 + jmp NotInitialized ; Return an error code ; Save new parity @@ -218,7 +214,7 @@ _rs232_params: beq @L3 cpx #4 bcs @L3 -@L2: lda #ErrBaudTooFast +@L2: lda #RS_ERR_BAUD_TOO_FAST bne @L9 ; Set baud/parameters @@ -232,7 +228,7 @@ _rs232_params: lda HackBauds,x @L4: cmp #$ff bne @L5 - lda #ErrBaudNotAvail + lda #RS_ERR_BAUD_NOT_AVAIL bne @L9 @L5: tax @@ -240,7 +236,7 @@ _rs232_params: beq @L6 bit Turbo232 bmi @L6 - lda #ErrBaudNotAvail + lda #RS_ERR_BAUD_NOT_AVAIL bne @L9 @L6: lda tmp1 @@ -331,13 +327,12 @@ _rs232_done: ; _rs232_get: - jsr CheckInitialized ; Check if initialized - bcc @L1 - rts + bit Initialized + bpl NotInitialized ; Jump if not initialized ; Check for bytes to send -@L1: sta ptr1 + sta ptr1 stx ptr1+1 ; Store pointer to received char ldx SendFreeCnt cpx #$ff @@ -350,7 +345,7 @@ _rs232_get: @L2: lda RecvFreeCnt cmp #$ff bne @L3 - lda #ErrNoData + lda #RS_ERR_NO_DATA ldx #0 rts @@ -377,6 +372,15 @@ _rs232_get: txa ; Return code = 0 rts +;---------------------------------------------------------------------------- +; +; RS232 module not initialized + +NotInitialized: + lda #RS_ERR_NOT_INITIALIZED + rts + ;---------------------------------------------------------------------------- ; ; unsigned char __fastcall__ rs232_put (char B); @@ -387,13 +391,12 @@ _rs232_get: ; _rs232_put: - jsr CheckInitialized ; Check initialized - bcc @L1 - rts + bit Initialized + bpl NotInitialized ; Jump if not initialized ; Try to send -@L1: ldx SendFreeCnt + ldx SendFreeCnt cpx #$ff beq @L2 pha @@ -405,7 +408,7 @@ _rs232_put: @L2: ldx SendFreeCnt bne @L3 - lda #ErrOverflow + lda #RS_ERR_OVERFLOW ldx #$00 rts @@ -426,14 +429,12 @@ _rs232_put: ; _rs232_pause: -; Check initialized - jsr CheckInitialized - bcc @L1 - rts + bit Initialized + bpl NotInitialized ; Jump if not initialized ; Assert flow control -@L1: lda RtsOff + lda RtsOff sta Stopped sta ACIA+RegCommand @@ -469,10 +470,8 @@ PauseTimes: ; _rs232_unpause: -; Check initialized - jsr CheckInitialized - bcc @L1 - rts + bit Initialized + bpl NotInitialized ; Jump if not initialized ; Re-enable rx interrupts & release flow control @@ -501,13 +500,14 @@ _rs232_status: stx ptr2+1 jsr popax sta ptr1 - stx ptr1+1 - jsr CheckInitialized - bcs @L9 + stx ptr1+1 + bit Initialized + bmi @L1 + jmp NotInitialized ; Get status - lda ACIA+RegStatus +@L1: lda ACIA+RegStatus ldy #0 sta (ptr1),y jsr PollReceive ; bug-recovery hack @@ -564,7 +564,7 @@ NmiHandler: ; Drop this char -@L3: inc DropCnt+0 ;not time-critical +@L3: inc DropCnt+0 ; not time-critical bne @L4 inc DropCnt+1 bne @L4 @@ -574,25 +574,7 @@ NmiHandler: @L4: jmp NmiExit @L9: pla - jmp NmiContinue - -;---------------------------------------------------------------------------- -; -; CheckInitialized - internal check if initialized -; Set carry and an error code if not initialized, clear carry and do not -; change any registers if initialized. -; - -CheckInitialized: - bit Initialized - bmi @L1 - lda #ErrNotInitialized - ldx #0 - sec - rts - -@L1: clc - rts + jmp NmiContinue ;---------------------------------------------------------------------------- ; Try to send a byte. Internal routine. A = TryHard diff --git a/libsrc/common/rs232.inc b/libsrc/common/rs232.inc new file mode 100644 index 000000000..fa0089ac7 --- /dev/null +++ b/libsrc/common/rs232.inc @@ -0,0 +1,21 @@ +; +; rs232.inc +; +; (C) Copyright 2002 Ullrich von Bassewitz (uz@cc65.org) +; + +; Assembler include file that makes the constants and structures from rs232.h +; available for asm code. + + + +; Error codes returned by all functions +RS_ERR_OK = $00 ; Not an error - relax +RS_ERR_NOT_INITIALIZED = $01 ; Module not initialized +RS_ERR_BAUD_TOO_FAST = $02 ; Cannot handle baud rate +RS_ERR_BAUD_NOT_AVAIL = $03 ; Baud rate not available +RS_ERR_NO_DATA = $04 ; Nothing to read +RS_ERR_OVERFLOW = $05 ; No room in send buffer + + +