From: Neil Armstrong Date: Wed, 11 Apr 2018 15:40:40 +0000 (+0200) Subject: ARM64: meson: Sync DT and Bindings with Linux 4.16 X-Git-Tag: v2018.07-rc1~222 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7d750c3520c5565585519cc016b9139cee7632a4;p=u-boot ARM64: meson: Sync DT and Bindings with Linux 4.16 Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.16.0. Signed-off-by: Neil Armstrong --- diff --git a/arch/arm/dts/meson-gx.dtsi b/arch/arm/dts/meson-gx.dtsi index 738ed689ff..4ee2e79514 100644 --- a/arch/arm/dts/meson-gx.dtsi +++ b/arch/arm/dts/meson-gx.dtsi @@ -211,32 +211,39 @@ #size-cells = <2>; ranges; - cbus: cbus@c1100000 { + cbus: bus@c1100000 { compatible = "simple-bus"; reg = <0x0 0xc1100000 0x0 0x100000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + gpio_intc: interrupt-controller@9880 { + compatible = "amlogic,meson-gpio-intc"; + reg = <0x0 0x9880 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>; + status = "disabled"; + }; + reset: reset-controller@4404 { compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset"; - reg = <0x0 0x04404 0x0 0x20>; + reg = <0x0 0x04404 0x0 0x9c>; #reset-cells = <1>; }; uart_A: serial@84c0 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x84c0 0x0 0x14>; + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x84c0 0x0 0x18>; interrupts = ; - clocks = <&xtal>; status = "disabled"; }; uart_B: serial@84dc { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x84dc 0x0 0x14>; + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x84dc 0x0 0x18>; interrupts = ; - clocks = <&xtal>; status = "disabled"; }; @@ -279,10 +286,9 @@ }; uart_C: serial@8700 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x8700 0x0 0x14>; + compatible = "amlogic,meson-gx-uart"; + reg = <0x0 0x8700 0x0 0x18>; interrupts = ; - clocks = <&xtal>; status = "disabled"; }; @@ -360,33 +366,53 @@ }; }; - aobus: aobus@c8100000 { + aobus: bus@c8100000 { compatible = "simple-bus"; reg = <0x0 0xc8100000 0x0 0x100000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; - clkc_AO: clock-controller@040 { - compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc"; - reg = <0x0 0x00040 0x0 0x4>; - #clock-cells = <1>; - #reset-cells = <1>; + sysctrl_AO: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-gx-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&sysctrl>; + }; + + clkc_AO: clock-controller { + compatible = "amlogic,meson-gx-aoclkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + }; + + cec_AO: cec@100 { + compatible = "amlogic,meson-gx-ao-cec"; + reg = <0x0 0x00100 0x0 0x14>; + interrupts = ; + }; + + sec_AO: ao-secure@140 { + compatible = "amlogic,meson-gx-ao-secure", "syscon"; + reg = <0x0 0x140 0x0 0x140>; + amlogic,has-chip-id; }; uart_AO: serial@4c0 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x004c0 0x0 0x14>; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x004c0 0x0 0x18>; interrupts = ; - clocks = <&xtal>; status = "disabled"; }; uart_AO_B: serial@4e0 { - compatible = "amlogic,meson-uart"; - reg = <0x0 0x004e0 0x0 0x14>; + compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart"; + reg = <0x0 0x004e0 0x0 0x18>; interrupts = ; - clocks = <&xtal>; status = "disabled"; }; @@ -427,19 +453,24 @@ }; }; - hiubus: hiubus@c883c000 { + hiubus: bus@c883c000 { compatible = "simple-bus"; reg = <0x0 0xc883c000 0x0 0x2000>; #address-cells = <2>; #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>; + sysctrl: system-controller@0 { + compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd"; + reg = <0 0 0 0x400>; + }; + mailbox: mailbox@404 { compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu"; reg = <0 0x404 0 0x4c>; - interrupts = <0 208 IRQ_TYPE_EDGE_RISING>, - <0 209 IRQ_TYPE_EDGE_RISING>, - <0 210 IRQ_TYPE_EDGE_RISING>; + interrupts = , + , + ; #mbox-cells = <1>; }; }; @@ -448,7 +479,7 @@ compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac"; reg = <0x0 0xc9410000 0x0 0x10000 0x0 0xc8834540 0x0 0x4>; - interrupts = <0 8 1>; + interrupts = ; interrupt-names = "macirq"; status = "disabled"; }; diff --git a/arch/arm/dts/meson-gxbb-odroidc2.dts b/arch/arm/dts/meson-gxbb-odroidc2.dts index d147c853ab..ee4ada61c5 100644 --- a/arch/arm/dts/meson-gxbb-odroidc2.dts +++ b/arch/arm/dts/meson-gxbb-odroidc2.dts @@ -50,7 +50,7 @@ / { compatible = "hardkernel,odroid-c2", "amlogic,meson-gxbb"; model = "Hardkernel ODROID-C2"; - + aliases { serial0 = &uart_AO; }; @@ -135,6 +135,24 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; }; ðmac { @@ -156,7 +174,11 @@ #size-cells = <0>; eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; }; }; @@ -177,6 +199,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &i2c_A { status = "okay"; pinctrl-0 = <&i2c_a_pins>; @@ -194,7 +228,9 @@ "USB HUB nRESET", "USB OTG Power En", "J7 Header Pin2", "IR In", "J7 Header Pin4", "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7", - "HDMI CEC", "SYS LED"; + "HDMI CEC", "SYS LED", + /* GPIO_TEST_N */ + ""; }; &pinctrl_periphs { @@ -233,11 +269,9 @@ "J2 Header Pin12", "J2 Header Pin13", "J2 Header Pin8", "J2 Header Pin10", "", "", "", "", "", - "J2 Header Pin11", "", "J2 Header Pin7", + "J2 Header Pin11", "", "J2 Header Pin7", "", /* Bank GPIOCLK */ - "", "", "", "", - /* GPIO_TEST_N */ - ""; + "", "", "", ""; }; &saradc { @@ -253,7 +287,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -270,11 +305,11 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; max-frequency = <200000000>; non-removable; disable-wp; @@ -300,6 +335,7 @@ &usb1_phy { status = "okay"; + phy-supply = <&usb_otg_pwr>; }; &usb0 { diff --git a/arch/arm/dts/meson-gxbb.dtsi b/arch/arm/dts/meson-gxbb.dtsi index 17d3efdf14..3290a4dc35 100644 --- a/arch/arm/dts/meson-gxbb.dtsi +++ b/arch/arm/dts/meson-gxbb.dtsi @@ -307,6 +307,15 @@ }; }; +&cec_AO { + clocks = <&clkc_AO CLKID_AO_CEC_32K>; + clock-names = "core"; +}; + +&clkc_AO { + compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc"; +}; + ðmac { clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, @@ -314,6 +323,12 @@ clock-names = "stmmaceth", "clkin0", "clkin1"; }; +&gpio_intc { + compatible = "amlogic,meson-gpio-intc", + "amlogic,meson-gxbb-gpio-intc"; + status = "okay"; +}; + &hdmi_tx { compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; resets = <&reset RESET_HDMITX_CAPB3>, @@ -370,19 +385,36 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_periphs 0 14 120>; + gpio-ranges = <&pinctrl_periphs 0 0 119>; }; emmc_pins: emmc { mux { groups = "emmc_nand_d07", "emmc_cmd", - "emmc_clk", - "emmc_ds"; + "emmc_clk"; + function = "emmc"; + }; + }; + + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_ds"; function = "emmc"; }; }; + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "BOOT_8"; + bias-pull-down; + }; + }; + nor_pins: nor { mux { groups = "nor_d", @@ -421,6 +453,17 @@ }; }; + sdcard_clk_gate_pins: sdcard_clk_gate { + mux { + groups = "CARD_2"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "CARD_2"; + bias-pull-down; + }; + }; + sdio_pins: sdio { mux { groups = "sdio_d0", @@ -433,6 +476,17 @@ }; }; + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + sdio_irq_pins: sdio_irq { mux { groups = "sdio_irq"; @@ -640,33 +694,74 @@ }; }; +&pwrc_vpu { + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ +}; + &saradc { compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc"; clocks = <&xtal>, <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SANA>, <&clkc CLKID_SAR_ADC_CLK>, <&clkc CLKID_SAR_ADC_SEL>; - clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; }; &sd_emmc_a { clocks = <&clkc CLKID_SD_EMMC_A>, - <&xtal>, + <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, - <&xtal>, + <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_c { clocks = <&clkc CLKID_SD_EMMC_C>, - <&xtal>, + <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; @@ -682,6 +777,32 @@ clocks = <&clkc CLKID_SPI>; }; +&uart_A { + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_AO { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_AO_B { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_C { + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; + power-domains = <&pwrc_vpu>; }; diff --git a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts index 84cbebb534..c3515599ed 100644 --- a/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts +++ b/arch/arm/dts/meson-gxl-s905x-khadas-vim.dts @@ -66,6 +66,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &hdmi_tx { status = "okay"; pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; @@ -104,6 +111,62 @@ linux,rc-map-name = "rc-geekbox"; }; +&pinctrl_aobus { + gpio-line-names = "UART TX", + "UART RX", + "Power Key In", + "J9 Header Pin35", + "J9 Header Pin16", + "J9 Header Pin15", + "J9 Header Pin33", + "IR In", + "HDMI CEC", + "SYS LED", + /* GPIO_TEST_N */ + ""; +}; + +&pinctrl_periphs { + gpio-line-names = /* Bank GPIOZ */ + "", "", "", "", "", "", "", + "", "", "", "", "", "", "", + "Power OFF", + "VCCK Enable", + /* Bank GPIOH */ + "HDMI HPD", "HDMI SDA", "HDMI SCL", + "HDMI_5V_EN", "SPDIF", + "J9 Header Pin37", + "J9 Header Pin30", + "J9 Header Pin29", + "J9 Header Pin32", + "J9 Header Pin31", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", + "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", + "eMMC Clk", "eMMC Reset", "eMMC CMD", + "", "BOOT_MODE", "", "", "eMMC Data Strobe", + /* Bank CARD */ + "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", + "SDCard D3", "SDCard D2", "SDCard Det", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", + "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK", + "VCCK Regulator", "VDDEE Regulator", + /* Bank GPIOX */ + "WIFI SDIO D0", "WIFI SDIO D1", "WIFI SDIO D2", + "WIFI SDIO D3", "WIFI SDIO CLK", "WIFI SDIO CMD", + "WIFI Power Enable", "WIFI WAKE HOST", + "Bluetooth PCM DOUT", "Bluetooth PCM DIN", + "Bluetooth PCM SYNC", "Bluetooth PCM CLK", + "Bluetooth UART TX", "Bluetooth UART RX", + "Bluetooth UART CTS", "Bluetooth UART RTS", + "WIFI 32K", "Bluetooth Enable", + "Bluetooth WAKE HOST", + /* Bank GPIOCLK */ + "", "J9 Header Pin39"; +}; + &pwm_AO_ab { status = "okay"; pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; diff --git a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts index dc2acf4d16..9139761c79 100644 --- a/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm/dts/meson-gxl-s905x-libretech-cc.dts @@ -71,6 +71,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vcc_3v3: regulator-vcc_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC_3V3"; @@ -90,6 +102,16 @@ states = <3300000 0>, <1800000 1>; + + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; vddio_boot: regulator-vddio_boot { @@ -100,6 +122,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; @@ -110,6 +139,11 @@ status = "okay"; }; +&internal_phy { + pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>; + pinctrl-names = "default"; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -128,14 +162,80 @@ }; }; +&pinctrl_aobus { + gpio-line-names = "UART TX", + "UART RX", + "Blue LED", + "SDCard Voltage Switch", + "7J1 Header Pin5", + "7J1 Header Pin3", + "7J1 Header Pin12", + "IR In", + "9J3 Switch HDMI CEC/7J1 Header Pin11", + "7J1 Header Pin13", + /* GPIO_TEST_N */ + "7J1 Header Pin15"; +}; + +&pinctrl_periphs { + gpio-line-names = /* Bank GPIOZ */ + "", "", "", "", "", "", "", + "", "", "", "", "", "", "", + "Eth Link LED", "Eth Activity LED", + /* Bank GPIOH */ + "HDMI HPD", "HDMI SDA", "HDMI SCL", + "HDMI_5V_EN", "9J1 Header Pin2", + "Analog Audio Mute", + "2J3 Header Pin6", + "2J3 Header Pin5", + "2J3 Header Pin4", + "2J3 Header Pin3", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", + "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7", + "eMMC Clk", "eMMC Reset", "eMMC CMD", + "ALT BOOT MODE", "", "", "", "eMMC Data Strobe", + /* Bank CARD */ + "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", + "SDCard D3", "SDCard D2", "SDCard Det", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", "", + "Green LED", "VCCK Enable", + "7J1 Header Pin27", "7J1 Header Pin28", + "VCCK Regulator", "VDDEE Regulator", + /* Bank GPIOX */ + "7J1 Header Pin22", "7J1 Header Pin26", + "7J1 Header Pin36", "7J1 Header Pin38", + "7J1 Header Pin40", "7J1 Header Pin37", + "7J1 Header Pin33", "7J1 Header Pin35", + "7J1 Header Pin19", "7J1 Header Pin21", + "7J1 Header Pin24", "7J1 Header Pin23", + "7J1 Header Pin8", "7J1 Header Pin10", + "7J1 Header Pin16", "7J1 Header Pin18", + "7J1 Header Pin32", "7J1 Header Pin29", + "7J1 Header Pin31", + /* Bank GPIOCLK */ + "7J1 Header Pin7", ""; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + /* SD card */ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; max-frequency = <100000000>; disable-wp; @@ -149,11 +249,13 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; cap-mmc-highspeed; + mmc-ddr-3_3v; max-frequency = <50000000>; non-removable; disable-wp; diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dts b/arch/arm/dts/meson-gxl-s905x-p212.dts index 6ab17c1eee..6e2bf85829 100644 --- a/arch/arm/dts/meson-gxl-s905x-p212.dts +++ b/arch/arm/dts/meson-gxl-s905x-p212.dts @@ -71,6 +71,13 @@ }; }; +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; +}; + &cvbs_vdac_port { cvbs_vdac_out: endpoint { remote-endpoint = <&cvbs_connector_in>; diff --git a/arch/arm/dts/meson-gxl-s905x-p212.dtsi b/arch/arm/dts/meson-gxl-s905x-p212.dtsi index 0385fb9861..2db1377819 100644 --- a/arch/arm/dts/meson-gxl-s905x-p212.dtsi +++ b/arch/arm/dts/meson-gxl-s905x-p212.dtsi @@ -27,6 +27,18 @@ reg = <0x0 0x0 0x0 0x80000000>; }; + hdmi_5v: regulator-hdmi-5v { + compatible = "regulator-fixed"; + + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio GPIOH_3 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + vddio_boot: regulator-vddio_boot { compatible = "regulator-fixed"; regulator-name = "VDDIO_BOOT"; @@ -94,7 +106,8 @@ &sd_emmc_a { status = "okay"; pinctrl-0 = <&sdio_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdio_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; #address-cells = <1>; #size-cells = <0>; @@ -115,7 +128,8 @@ &sd_emmc_b { status = "okay"; pinctrl-0 = <&sdcard_pins>; - pinctrl-names = "default"; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <4>; cap-sd-highspeed; @@ -132,11 +146,11 @@ /* eMMC */ &sd_emmc_c { status = "okay"; - pinctrl-0 = <&emmc_pins>; - pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; + pinctrl-1 = <&emmc_clk_gate_pins>; + pinctrl-names = "default", "clk-gate"; bus-width = <8>; - cap-sd-highspeed; cap-mmc-highspeed; max-frequency = <200000000>; non-removable; diff --git a/arch/arm/dts/meson-gxl.dtsi b/arch/arm/dts/meson-gxl.dtsi index 8d4f3160a0..c8514110b9 100644 --- a/arch/arm/dts/meson-gxl.dtsi +++ b/arch/arm/dts/meson-gxl.dtsi @@ -43,11 +43,20 @@ #include "meson-gx.dtsi" #include +#include #include #include / { compatible = "amlogic,meson-gxl"; + + reserved-memory { + /* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */ + secmon_reserved_alt: secmon@5000000 { + reg = <0x0 0x05000000 0x0 0x300000>; + no-map; + }; + }; }; ðmac { @@ -207,6 +216,21 @@ }; }; +&cec_AO { + clocks = <&clkc_AO CLKID_AO_CEC_32K>; + clock-names = "core"; +}; + +&clkc_AO { + compatible = "amlogic,meson-gxl-aoclkc", "amlogic,meson-gx-aoclkc"; +}; + +&gpio_intc { + compatible = "amlogic,meson-gpio-intc", + "amlogic,meson-gxl-gpio-intc"; + status = "okay"; +}; + &hdmi_tx { compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; resets = <&reset RESET_HDMITX_CAPB3>, @@ -258,19 +282,36 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; - gpio-ranges = <&pinctrl_periphs 0 10 101>; + gpio-ranges = <&pinctrl_periphs 0 0 100>; }; emmc_pins: emmc { mux { groups = "emmc_nand_d07", "emmc_cmd", - "emmc_clk", - "emmc_ds"; + "emmc_clk"; function = "emmc"; }; }; + emmc_ds_pins: emmc-ds { + mux { + groups = "emmc_ds"; + function = "emmc"; + }; + }; + + emmc_clk_gate_pins: emmc_clk_gate { + mux { + groups = "BOOT_8"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "BOOT_8"; + bias-pull-down; + }; + }; + nor_pins: nor { mux { groups = "nor_d", @@ -309,6 +350,17 @@ }; }; + sdcard_clk_gate_pins: sdcard_clk_gate { + mux { + groups = "CARD_2"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "CARD_2"; + bias-pull-down; + }; + }; + sdio_pins: sdio { mux { groups = "sdio_d0", @@ -321,6 +373,17 @@ }; }; + sdio_clk_gate_pins: sdio_clk_gate { + mux { + groups = "GPIOX_4"; + function = "gpio_periphs"; + }; + cfg-pull-down { + pins = "GPIOX_4"; + bias-pull-down; + }; + }; + sdio_irq_pins: sdio_irq { mux { groups = "sdio_irq"; @@ -568,6 +631,7 @@ internal_phy: ethernet-phy@8 { compatible = "ethernet-phy-id0181.4400", "ethernet-phy-ieee802.3-c22"; + interrupts = ; reg = <8>; max-speed = <100>; }; @@ -581,33 +645,74 @@ }; }; +&pwrc_vpu { + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + /* + * VPU clocking is provided by two identical clock paths + * VPU_0 and VPU_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + * Same for VAPB but with a final gate after the glitch free mux. + */ + assigned-clocks = <&clkc CLKID_VPU_0_SEL>, + <&clkc CLKID_VPU_0>, + <&clkc CLKID_VPU>, /* Glitch free mux */ + <&clkc CLKID_VAPB_0_SEL>, + <&clkc CLKID_VAPB_0>, + <&clkc CLKID_VAPB_SEL>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_VPU_0>, + <&clkc CLKID_FCLK_DIV4>, + <0>, /* Do Nothing */ + <&clkc CLKID_VAPB_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>, /* Do Nothing */ + <0>, /* Do Nothing */ + <250000000>, + <0>; /* Do Nothing */ +}; + &saradc { compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc"; clocks = <&xtal>, <&clkc CLKID_SAR_ADC>, - <&clkc CLKID_SANA>, <&clkc CLKID_SAR_ADC_CLK>, <&clkc CLKID_SAR_ADC_SEL>; - clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel"; + clock-names = "clkin", "core", "adc_clk", "adc_sel"; }; &sd_emmc_a { clocks = <&clkc CLKID_SD_EMMC_A>, - <&xtal>, + <&clkc CLKID_SD_EMMC_A_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_b { clocks = <&clkc CLKID_SD_EMMC_B>, - <&xtal>, + <&clkc CLKID_SD_EMMC_B_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; &sd_emmc_c { clocks = <&clkc CLKID_SD_EMMC_C>, - <&xtal>, + <&clkc CLKID_SD_EMMC_C_CLK0>, <&clkc CLKID_FCLK_DIV2>; clock-names = "core", "clkin0", "clkin1"; }; @@ -623,6 +728,32 @@ clocks = <&clkc CLKID_SPI>; }; +&uart_A { + clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_AO { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_AO_B { + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_B { + clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + +&uart_C { + clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>; + clock-names = "xtal", "pclk", "baud"; +}; + &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; + power-domains = <&pwrc_vpu>; }; diff --git a/include/dt-bindings/clock/gxbb-aoclkc.h b/include/dt-bindings/clock/gxbb-aoclkc.h index 31751482d1..9d15e2221f 100644 --- a/include/dt-bindings/clock/gxbb-aoclkc.h +++ b/include/dt-bindings/clock/gxbb-aoclkc.h @@ -62,5 +62,6 @@ #define CLKID_AO_UART1 3 #define CLKID_AO_UART2 4 #define CLKID_AO_IR_BLASTER 5 +#define CLKID_AO_CEC_32K 6 #endif diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index e3e9f7919c..8ba99a5e3f 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * GXBB clock tree IDs */ @@ -5,37 +6,96 @@ #ifndef __GXBB_CLKC_H #define __GXBB_CLKC_H +#define CLKID_SYS_PLL 0 #define CLKID_HDMI_PLL 2 +#define CLKID_FIXED_PLL 3 #define CLKID_FCLK_DIV2 4 #define CLKID_FCLK_DIV3 5 #define CLKID_FCLK_DIV4 6 +#define CLKID_FCLK_DIV5 7 +#define CLKID_FCLK_DIV7 8 #define CLKID_GP0_PLL 9 #define CLKID_CLK81 12 +#define CLKID_MPLL0 13 +#define CLKID_MPLL1 14 #define CLKID_MPLL2 15 +#define CLKID_DDR 16 +#define CLKID_DOS 17 +#define CLKID_ISA 18 +#define CLKID_PL301 19 +#define CLKID_PERIPHS 20 #define CLKID_SPICC 21 #define CLKID_I2C 22 #define CLKID_SAR_ADC 23 +#define CLKID_SMART_CARD 24 #define CLKID_RNG0 25 #define CLKID_UART0 26 +#define CLKID_SDHC 27 +#define CLKID_STREAM 28 +#define CLKID_ASYNC_FIFO 29 +#define CLKID_SDIO 30 +#define CLKID_ABUF 31 +#define CLKID_HIU_IFACE 32 +#define CLKID_ASSIST_MISC 33 #define CLKID_SPI 34 #define CLKID_ETH 36 +#define CLKID_I2S_SPDIF 35 +#define CLKID_DEMUX 37 #define CLKID_AIU_GLUE 38 #define CLKID_IEC958 39 #define CLKID_I2S_OUT 40 +#define CLKID_AMCLK 41 +#define CLKID_AIFIFO2 42 +#define CLKID_MIXER 43 #define CLKID_MIXER_IFACE 44 +#define CLKID_ADC 45 +#define CLKID_BLKMV 46 #define CLKID_AIU 47 #define CLKID_UART1 48 +#define CLKID_G2D 49 #define CLKID_USB0 50 #define CLKID_USB1 51 +#define CLKID_RESET 52 +#define CLKID_NAND 53 +#define CLKID_DOS_PARSER 54 #define CLKID_USB 55 +#define CLKID_VDIN1 56 +#define CLKID_AHB_ARB0 57 +#define CLKID_EFUSE 58 +#define CLKID_BOOT_ROM 59 +#define CLKID_AHB_DATA_BUS 60 +#define CLKID_AHB_CTRL_BUS 61 +#define CLKID_HDMI_INTR_SYNC 62 #define CLKID_HDMI_PCLK 63 #define CLKID_USB1_DDR_BRIDGE 64 #define CLKID_USB0_DDR_BRIDGE 65 +#define CLKID_MMC_PCLK 66 +#define CLKID_DVIN 67 #define CLKID_UART2 68 #define CLKID_SANA 69 +#define CLKID_VPU_INTR 70 +#define CLKID_SEC_AHB_AHB3_BRIDGE 71 +#define CLKID_CLK81_A53 72 +#define CLKID_VCLK2_VENCI0 73 +#define CLKID_VCLK2_VENCI1 74 +#define CLKID_VCLK2_VENCP0 75 +#define CLKID_VCLK2_VENCP1 76 #define CLKID_GCLK_VENCI_INT0 77 +#define CLKID_GCLK_VENCI_INT 78 +#define CLKID_DAC_CLK 79 #define CLKID_AOCLK_GATE 80 #define CLKID_IEC958_GATE 81 +#define CLKID_ENC480P 82 +#define CLKID_RNG1 83 +#define CLKID_GCLK_VENCI_INT1 84 +#define CLKID_VCLK2_VENCLMCC 85 +#define CLKID_VCLK2_VENCL 86 +#define CLKID_VCLK_OTHER 87 +#define CLKID_EDP 88 +#define CLKID_AO_MEDIA_CPU 89 +#define CLKID_AO_AHB_SRAM 90 +#define CLKID_AO_AHB_BUS 91 +#define CLKID_AO_IFACE 92 #define CLKID_AO_I2C 93 #define CLKID_SD_EMMC_A 94 #define CLKID_SD_EMMC_B 95 @@ -50,5 +110,20 @@ #define CLKID_CTS_AMCLK 107 #define CLKID_CTS_MCLK_I958 110 #define CLKID_CTS_I958 113 +#define CLKID_32K_CLK 114 +#define CLKID_SD_EMMC_A_CLK0 119 +#define CLKID_SD_EMMC_B_CLK0 122 +#define CLKID_SD_EMMC_C_CLK0 125 +#define CLKID_VPU_0_SEL 126 +#define CLKID_VPU_0 128 +#define CLKID_VPU_1_SEL 129 +#define CLKID_VPU_1 131 +#define CLKID_VPU 132 +#define CLKID_VAPB_0_SEL 133 +#define CLKID_VAPB_0 135 +#define CLKID_VAPB_1_SEL 136 +#define CLKID_VAPB_1 138 +#define CLKID_VAPB_SEL 139 +#define CLKID_VAPB 140 #endif /* __GXBB_CLKC_H */ diff --git a/include/dt-bindings/gpio/meson-gxbb-gpio.h b/include/dt-bindings/gpio/meson-gxbb-gpio.h index 58654fd7aa..43a68a1110 100644 --- a/include/dt-bindings/gpio/meson-gxbb-gpio.h +++ b/include/dt-bindings/gpio/meson-gxbb-gpio.h @@ -29,6 +29,7 @@ #define GPIOAO_11 11 #define GPIOAO_12 12 #define GPIOAO_13 13 +#define GPIO_TEST_N 14 #define GPIOZ_0 0 #define GPIOZ_1 1 @@ -149,6 +150,5 @@ #define GPIOCLK_1 116 #define GPIOCLK_2 117 #define GPIOCLK_3 118 -#define GPIO_TEST_N 119 #endif diff --git a/include/dt-bindings/gpio/meson-gxl-gpio.h b/include/dt-bindings/gpio/meson-gxl-gpio.h index 684d0d7add..01f2a2abd3 100644 --- a/include/dt-bindings/gpio/meson-gxl-gpio.h +++ b/include/dt-bindings/gpio/meson-gxl-gpio.h @@ -25,6 +25,7 @@ #define GPIOAO_7 7 #define GPIOAO_8 8 #define GPIOAO_9 9 +#define GPIO_TEST_N 10 #define GPIOZ_0 0 #define GPIOZ_1 1 @@ -126,6 +127,5 @@ #define GPIOX_18 97 #define GPIOCLK_0 98 #define GPIOCLK_1 99 -#define GPIO_TEST_N 100 #endif