From: Masahiro Yamada Date: Mon, 4 Dec 2017 03:37:00 +0000 (+0900) Subject: Move CONFIG_PANIC_HANG to Kconfig X-Git-Tag: v2018.01-rc3~11 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7e3caa81e0e9cc5e2beed4a3a1c334e2119f4498;p=u-boot Move CONFIG_PANIC_HANG to Kconfig Freescale (NXP) boards have lots of defconfig files per board. I used "imply PANIC_HANG" for them. Signed-off-by: Masahiro Yamada Reviewed-by: York Sun --- diff --git a/README b/README index 93c7ea9665..7594f3caae 100644 --- a/README +++ b/README @@ -2168,16 +2168,6 @@ The following options need to be configured: currently only supports clearing the memory. - Error Recovery: - CONFIG_PANIC_HANG - - Define this variable to stop the system in case of a - fatal error, so that you have to reset it manually. - This is probably NOT a good idea for an embedded - system where you want the system to reboot - automatically as fast as possible, but it may be - useful during development since you can try to debug - the conditions that lead to the situation. - CONFIG_NET_RETRY_COUNT This variable defines the number of retries for diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig index 66bc32cc85..6c03dfb1d5 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig +++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig @@ -11,6 +11,7 @@ config ARCH_LS1012A select SYS_FSL_ERRATUM_A009008 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F + imply PANIC_HANG config ARCH_LS1043A bool @@ -91,6 +92,7 @@ config ARCH_LS1088A select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F imply SCSI + imply PANIC_HANG config ARCH_LS2080A bool @@ -129,6 +131,7 @@ config ARCH_LS2080A select SYS_FSL_ERRATUM_A009203 select ARCH_EARLY_INIT_R select BOARD_EARLY_INIT_F + imply PANIC_HANG config FSL_LSCH2 bool diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 5df8175f1e..19e8d02bf4 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -29,6 +29,7 @@ config TARGET_B4420QDS select ARCH_B4420 select SUPPORT_SPL select PHYS_64BIT + imply PANIC_HANG config TARGET_B4860QDS bool "Support B4860QDS" @@ -36,6 +37,7 @@ config TARGET_B4860QDS select BOARD_LATE_INIT if CHAIN_OF_TRUST select SUPPORT_SPL select PHYS_64BIT + imply PANIC_HANG config TARGET_BSC9131RDB bool "Support BSC9131RDB" @@ -57,6 +59,7 @@ config TARGET_C29XPCIE select SUPPORT_SPL select SUPPORT_TPL select PHYS_64BIT + imply PANIC_HANG config TARGET_P3041DS bool "Support P3041DS" @@ -64,6 +67,7 @@ config TARGET_P3041DS select ARCH_P3041 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG config TARGET_P4080DS bool "Support P4080DS" @@ -71,6 +75,7 @@ config TARGET_P4080DS select ARCH_P4080 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG config TARGET_P5020DS bool "Support P5020DS" @@ -78,6 +83,7 @@ config TARGET_P5020DS select ARCH_P5020 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG config TARGET_P5040DS bool "Support P5040DS" @@ -85,6 +91,7 @@ config TARGET_P5040DS select ARCH_P5040 select BOARD_LATE_INIT if CHAIN_OF_TRUST imply CMD_SATA + imply PANIC_HANG config TARGET_MPC8536DS bool "Support MPC8536DS" @@ -101,6 +108,7 @@ config TARGET_MPC8541CDS config TARGET_MPC8544DS bool "Support MPC8544DS" select ARCH_MPC8544 + imply PANIC_HANG config TARGET_MPC8548CDS bool "Support MPC8548CDS" @@ -124,6 +132,7 @@ config TARGET_MPC8572DS # Use DDR3 controller with DDR2 DIMMs on this board select SYS_FSL_DDRC_GEN3 imply SCSI + imply PANIC_HANG config TARGET_P1010RDB_PA bool "Support P1010RDB_PA" @@ -133,6 +142,7 @@ config TARGET_P1010RDB_PA select SUPPORT_TPL imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1010RDB_PB bool "Support P1010RDB_PB" @@ -142,6 +152,7 @@ config TARGET_P1010RDB_PB select SUPPORT_TPL imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1022DS bool "Support P1022DS" @@ -155,6 +166,7 @@ config TARGET_P1023RDB bool "Support P1023RDB" select ARCH_P1023 imply CMD_EEPROM + imply PANIC_HANG config TARGET_P1020MBG bool "Support P1020MBG-PC" @@ -163,6 +175,7 @@ config TARGET_P1020MBG select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1020RDB_PC bool "Support P1020RDB-PC" @@ -171,6 +184,7 @@ config TARGET_P1020RDB_PC select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1020RDB_PD bool "Support P1020RDB-PD" @@ -179,6 +193,7 @@ config TARGET_P1020RDB_PD select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1020UTM bool "Support P1020UTM" @@ -187,6 +202,7 @@ config TARGET_P1020UTM select ARCH_P1020 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1021RDB bool "Support P1021RDB" @@ -195,6 +211,7 @@ config TARGET_P1021RDB select ARCH_P1021 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1024RDB bool "Support P1024RDB" @@ -203,6 +220,7 @@ config TARGET_P1024RDB select ARCH_P1024 imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_P1025RDB bool "Support P1025RDB" @@ -256,6 +274,7 @@ config TARGET_T1023RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_EEPROM + imply PANIC_HANG config TARGET_T1024RDB bool "Support T1024RDB" @@ -264,6 +283,7 @@ config TARGET_T1024RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_EEPROM + imply PANIC_HANG config TARGET_T1040QDS bool "Support T1040QDS" @@ -272,6 +292,7 @@ config TARGET_T1040QDS select PHYS_64BIT imply CMD_EEPROM imply CMD_SATA + imply PANIC_HANG config TARGET_T1040RDB bool "Support T1040RDB" @@ -280,6 +301,7 @@ config TARGET_T1040RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T1040D4RDB bool "Support T1040D4RDB" @@ -288,6 +310,7 @@ config TARGET_T1040D4RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T1042RDB bool "Support T1042RDB" @@ -304,6 +327,7 @@ config TARGET_T1042D4RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T1042RDB_PI bool "Support T1042RDB_PI" @@ -312,6 +336,7 @@ config TARGET_T1042RDB_PI select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T2080QDS bool "Support T2080QDS" @@ -328,6 +353,7 @@ config TARGET_T2080RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T2081QDS bool "Support T2081QDS" @@ -342,12 +368,14 @@ config TARGET_T4160QDS select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T4160RDB bool "Support T4160RDB" select ARCH_T4160 select SUPPORT_SPL select PHYS_64BIT + imply PANIC_HANG config TARGET_T4240QDS bool "Support T4240QDS" @@ -356,6 +384,7 @@ config TARGET_T4240QDS select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_T4240RDB bool "Support T4240RDB" @@ -363,6 +392,7 @@ config TARGET_T4240RDB select SUPPORT_SPL select PHYS_64BIT imply CMD_SATA + imply PANIC_HANG config TARGET_CONTROLCENTERD bool "Support controlcenterd" @@ -393,16 +423,19 @@ config TARGET_UCP1020 bool "Support uCP1020" select ARCH_P1020 imply CMD_SATA + imply PANIC_HANG config TARGET_CYRUS_P5020 bool "Support Varisys Cyrus P5020" select ARCH_P5020 select PHYS_64BIT + imply PANIC_HANG config TARGET_CYRUS_P5040 bool "Support Varisys Cyrus P5040" select ARCH_P5040 select PHYS_64BIT + imply PANIC_HANG endchoice diff --git a/configs/TWR-P1025_defconfig b/configs/TWR-P1025_defconfig index 1eedd3c21f..1eeb5908e8 100644 --- a/configs/TWR-P1025_defconfig +++ b/configs/TWR-P1025_defconfig @@ -35,4 +35,5 @@ CONFIG_SYS_NS16550=y CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/UCP1020_SPIFLASH_defconfig b/configs/UCP1020_SPIFLASH_defconfig index c8f22620a0..3c3e9fca5a 100644 --- a/configs/UCP1020_SPIFLASH_defconfig +++ b/configs/UCP1020_SPIFLASH_defconfig @@ -43,4 +43,5 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_FS_CRAMFS=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/UCP1020_defconfig b/configs/UCP1020_defconfig index 0092e99283..bd17e059b6 100644 --- a/configs/UCP1020_defconfig +++ b/configs/UCP1020_defconfig @@ -43,4 +43,5 @@ CONFIG_FSL_ESPI=y CONFIG_USB=y CONFIG_USB_STORAGE=y CONFIG_FS_CRAMFS=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/adp-ae3xx_defconfig b/configs/adp-ae3xx_defconfig index 600566955a..cdbf801703 100644 --- a/configs/adp-ae3xx_defconfig +++ b/configs/adp-ae3xx_defconfig @@ -39,3 +39,4 @@ CONFIG_DM_SPI=y CONFIG_ATCSPI200_SPI=y CONFIG_TIMER=y CONFIG_ATCPIT100_TIMER=y +CONFIG_PANIC_HANG=y diff --git a/configs/qemu-ppce500_defconfig b/configs/qemu-ppce500_defconfig index f1db0d0fc9..9d2775519e 100644 --- a/configs/qemu-ppce500_defconfig +++ b/configs/qemu-ppce500_defconfig @@ -24,4 +24,5 @@ CONFIG_DOS_PARTITION=y CONFIG_NETDEVICES=y CONFIG_E1000=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig index 0f6cccc302..27a3b6e0ca 100644 --- a/configs/tricorder_defconfig +++ b/configs/tricorder_defconfig @@ -40,4 +40,5 @@ CONFIG_NAND=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SYS_NS16550=y CONFIG_BCH=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig index 7477b427ec..78afec03b8 100644 --- a/configs/tricorder_flash_defconfig +++ b/configs/tricorder_flash_defconfig @@ -39,4 +39,5 @@ CONFIG_NAND=y CONFIG_SPL_NAND_SIMPLE=y CONFIG_SYS_NS16550=y CONFIG_BCH=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/uniphier_ld4_sld8_defconfig b/configs/uniphier_ld4_sld8_defconfig index 08ba9cce50..0d12eb52de 100644 --- a/configs/uniphier_ld4_sld8_defconfig +++ b/configs/uniphier_ld4_sld8_defconfig @@ -51,3 +51,4 @@ CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y diff --git a/configs/uniphier_v7_defconfig b/configs/uniphier_v7_defconfig index d2a1e3bc1f..47b90d67cc 100644 --- a/configs/uniphier_v7_defconfig +++ b/configs/uniphier_v7_defconfig @@ -54,3 +54,4 @@ CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_UNIPHIER=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y diff --git a/configs/uniphier_v8_defconfig b/configs/uniphier_v8_defconfig index b0b213dc56..bbcf3b0968 100644 --- a/configs/uniphier_v8_defconfig +++ b/configs/uniphier_v8_defconfig @@ -51,3 +51,4 @@ CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_UNIPHIER=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y diff --git a/configs/xpedite517x_defconfig b/configs/xpedite517x_defconfig index a2324c3e79..37735182b9 100644 --- a/configs/xpedite517x_defconfig +++ b/configs/xpedite517x_defconfig @@ -27,4 +27,5 @@ CONFIG_DS4510=y CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/xpedite520x_defconfig b/configs/xpedite520x_defconfig index 7518ef2e39..7fffaa8a21 100644 --- a/configs/xpedite520x_defconfig +++ b/configs/xpedite520x_defconfig @@ -28,4 +28,5 @@ CONFIG_CMD_PCA953X=y CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/xpedite537x_defconfig b/configs/xpedite537x_defconfig index ead06a75f8..223bc4c72e 100644 --- a/configs/xpedite537x_defconfig +++ b/configs/xpedite537x_defconfig @@ -30,4 +30,5 @@ CONFIG_DS4510=y CONFIG_MTD_NOR_FLASH=y CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/configs/xpedite550x_defconfig b/configs/xpedite550x_defconfig index 80bc914eae..f3b9280889 100644 --- a/configs/xpedite550x_defconfig +++ b/configs/xpedite550x_defconfig @@ -30,4 +30,5 @@ CONFIG_PHYLIB=y CONFIG_SYS_NS16550=y CONFIG_USB=y CONFIG_USB_STORAGE=y +CONFIG_PANIC_HANG=y CONFIG_OF_LIBFDT=y diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 661bc8bf58..b1b672547b 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -173,7 +173,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index 7e805ecff0..f9d8cc69da 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -117,7 +117,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 #define CONFIG_SYS_MEMTEST_END 0x00400000 -#define CONFIG_PANIC_HANG /* DDR Setup */ #define CONFIG_DDR_SPD diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 7587225bda..eef16027a2 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -69,7 +69,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00010000 /* skip exception vectors */ #define CONFIG_SYS_MEMTEST_END 0x1f000000 /* skip u-boot at top of RAM */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L2 Cache as L2 SRAM diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index bec8a09b5f..9d9456c5e5 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -46,7 +46,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_SYS_CCSRBAR 0xe0000000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index ebc2e3aad4..91a55917e9 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -58,7 +58,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x7fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L2 Cache as L2 SRAM diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index 72b6e3ad6d..6a444aea61 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -215,7 +215,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* DDR Setup */ #define CONFIG_SYS_DDR_RAW_TIMING diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index 1b78a4f5dc..17ae6cfd40 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -52,8 +52,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_MEMTEST_START 0x01000000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x02000000 -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - /* Implement conversion of addresses in the LBC */ #define CONFIG_SYS_LBC_LBCR 0x00000000 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 917e5d5a06..8e71fdfecd 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -116,7 +116,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index ed6df53916..dd3cd6ecc6 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -196,7 +196,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 7dee2f0d45..791c6ef1b3 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -219,7 +219,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index bc5c0d2e68..fb79b6a559 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -127,7 +127,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 2b9c77f7c8..ceb9daaac2 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -226,7 +226,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 98f8f4f10c..ecf7f64659 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -96,7 +96,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index e8b1a74c64..77bfd50cc9 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -136,7 +136,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_SYS_CCSRBAR 0xffe00000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h index 5644a6153b..f75274e273 100644 --- a/include/configs/adp-ae3xx.h +++ b/include/configs/adp-ae3xx.h @@ -21,7 +21,6 @@ #define CONFIG_SKIP_TRUNOFF_WATCHDOG #define CONFIG_CMDLINE_EDITING -#define CONFIG_PANIC_HANG #define CONFIG_ARCH_MAP_SYSMEM diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index d0e8bfbed7..de9bc532fe 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -128,7 +128,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/cyrus.h b/include/configs/cyrus.h index 4fea53bf79..942fbe2849 100644 --- a/include/configs/cyrus.h +++ b/include/configs/cyrus.h @@ -89,7 +89,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index db920bc5cc..9cbc6249dc 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -117,7 +117,6 @@ #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */ -#define CONFIG_PANIC_HANG #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #include diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 0cd2f3c2bc..6587296237 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -223,8 +223,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - #ifdef CONFIG_SPL #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 576785e4b6..b995513bdf 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -221,8 +221,6 @@ unsigned long long get_qixis_addr(void); #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ - #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 07c192aecc..4522569c29 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -270,7 +270,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_SYS_CCSRBAR 0xffe00000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR diff --git a/include/configs/p1_twr.h b/include/configs/p1_twr.h index d2302636ac..2ae77b0ad4 100644 --- a/include/configs/p1_twr.h +++ b/include/configs/p1_twr.h @@ -69,7 +69,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x1fffffff -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_SYS_CCSRBAR 0xffe00000 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index eb4cfae928..8b78f084e9 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* Needed to fill the ccsrbar pointer */ diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 5a69708e30..7aaf2107d9 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -54,7 +54,6 @@ #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ #define CONFIG_SYS_MEMTEST_END 0x00400000 #define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ /* * Config the L3 Cache as L3 SRAM diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index d9ab91c967..f892a5712c 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -90,7 +90,6 @@ /* hang() the board on panic() */ -#define CONFIG_PANIC_HANG /* environment placement (for NAND), is different for FLASHCARD but does not * harm there */ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index 453f3db9eb..12cbe9b79d 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -218,8 +218,6 @@ /* for LD20; the last 64 byte is used for dynamic DDR PHY training */ #define CONFIG_SYS_MEM_TOP_HIDE 64 -#define CONFIG_PANIC_HANG - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) /* only for SPL */ diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h index beedc9eda8..4326984b06 100644 --- a/include/configs/xpedite517x.h +++ b/include/configs/xpedite517x.h @@ -487,7 +487,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ diff --git a/include/configs/xpedite520x.h b/include/configs/xpedite520x.h index f589d1db9b..5a56162e7c 100644 --- a/include/configs/xpedite520x.h +++ b/include/configs/xpedite520x.h @@ -291,7 +291,6 @@ #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index d217eb3c7d..b26223794e 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -341,7 +341,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 6c0981b113..624e9a82d0 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -339,7 +339,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ #define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ #define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ -#define CONFIG_PANIC_HANG /* do not reset board on panic */ #define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 3050f17b81..3119f00797 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -130,10 +130,6 @@ #define CONFIG_MX_CYCLIC #define CONFIG_SHOW_BOOT_PROGRESS -#ifdef DEBUG -#define CONFIG_PANIC_HANG 1 /* Require manual reboot */ -#endif - /*=========================================*/ /* FPGA Registers (board info and control) */ diff --git a/lib/Kconfig b/lib/Kconfig index f447c53bde..00ac650e74 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -45,6 +45,16 @@ config USE_TINY_PRINTF The supported format specifiers are %c, %s, %u/%d and %x. +config PANIC_HANG + bool "Do not reset the system on fatal error" + help + Define this option to stop the system in case of a fatal error, + so that you have to reset it manually. This is probably NOT a good + idea for an embedded system where you want the system to reboot + automatically as fast as possible, but it may be useful during + development since you can try to debug the conditions that lead to + the situation. + config REGEX bool "Enable regular expression support" default y if NET