From: cuz Date: Thu, 25 Oct 2001 19:13:36 +0000 (+0000) Subject: Debug the rs232 routines. This involved using two new segments, STARTUP X-Git-Tag: V2.12.0~2515 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7e65f64c6a5067c9c509da4fcd50413716f5fd88;p=cc65 Debug the rs232 routines. This involved using two new segments, STARTUP and NMI to make sure the NMI handler is loaded into the low 16K of memory which are active when the control is passed from the ROM NMI stub to the user handler. git-svn-id: svn://svn.cc65.org/cc65/trunk@1086 b7a2c559-68d2-44c3-8de9-860c34a00d81 --- diff --git a/libsrc/c128/c128.inc b/libsrc/c128/c128.inc index d97abd48c..8e4415e70 100644 --- a/libsrc/c128/c128.inc +++ b/libsrc/c128/c128.inc @@ -172,6 +172,7 @@ CIA2_CRB = $DD0F ; I/O: MMU MMU_CR = $FF00 +CC65_MMU_CFG = $0E ; Bank 0 with kernal ROM ; --------------------------------------------------------------------------- ; Super CPU diff --git a/libsrc/c128/crt0.s b/libsrc/c128/crt0.s index a1c97ce76..25ec5e6c3 100644 --- a/libsrc/c128/crt0.s +++ b/libsrc/c128/crt0.s @@ -18,7 +18,6 @@ ; ------------------------------------------------------------------------ ; Constants -CC65_MMU_CFG = $0E ; Bank 0 with kernal ROM IRQInd = $2FD ; JMP $0000 - used as indirect IRQ vector ; ------------------------------------------------------------------------ @@ -45,9 +44,16 @@ tmp3: .res 1 tmp4: .res 1 regbank: .res 6 ; 6 byte register bank -zpspace = * - zpstart ; Zero page space allocated +zpspace = * - zpstart ; Zero page space allocated -.code +; Place the startup code in a special segment to cope with the quirks of +; c128 banking. Do also create an empty segment named "NMI" to avoid +; warnings if the rs232 routines are not used. + +.segment "NMI" +; empty + +.segment "STARTUP" ; ------------------------------------------------------------------------ ; BASIC header with a SYS call diff --git a/libsrc/c128/rs232.s b/libsrc/c128/rs232.s index 5718cba07..0c5d7cf5c 100644 --- a/libsrc/c128/rs232.s +++ b/libsrc/c128/rs232.s @@ -27,6 +27,8 @@ .export _rs232_init, _rs232_params, _rs232_done, _rs232_get .export _rs232_put, _rs232_pause, _rs232_unpause, _rs232_status + .include "c128.inc" + NmiExit = $ff33 ;exit address for nmi @@ -120,7 +122,7 @@ _rs232_init: ;** check for super-cpu at 20 MHz - bit $d0bc + bit SCPU_Detect bmi @L4 bit $d0b8 bvs @L4 @@ -142,14 +144,14 @@ _rs232_init: ;** set up nmi's - lda $318 - ldy $319 + lda NMIVec + ldy NMIVec+1 sta NmiSave+0 sty NmiSave+1 lda #NmiHandler - sta $318 - sty $319 + sta NMIVec + sty NMIVec+1 ;** set default to 2400-8N1, enable interrupts @@ -313,8 +315,8 @@ _rs232_done: lda NmiSave+0 ldy NmiSave+1 - sta $318 - sty $319 + sta NMIVec + sty NMIVec+1 ; Flag uninitialized @@ -530,8 +532,17 @@ _rs232_status: ; C64 @ 57.6k: 177 cycles avail, worstAvail=177-43? = 134 ; SCPU @ 230.4k: 868 cycles avail: for a joke! ; +; Because of the C128 banking, the NMI handler must go into the non banked +; memory, since the ROM NMI entry point will switch to a configuration where +; only the lowest 16K of RAM are visible. We will place the NMI handler into +; it's own segment and map this segment into the lower 16K in the linker +; config. + +.segment "NMI" NmiHandler: + lda #CC65_MMU_CFG ;(2) + sta MMU_CR ;(4) lda ACIA+RegStatus ;(4) ;status ;check for byte received and #$08 ;(2) beq @L9 ;(2*) @@ -553,7 +564,7 @@ NmiHandler: ; Assert flow control @L2: lda RtsOff ;(3) ;assert flow control if buffer space too low - sta ACIA+RegCommand ;(4) ;command + sta ACIA+RegCommand ;(4) ;command sta Stopped ;(3) jmp NmiExit ;(3) @@ -569,6 +580,9 @@ NmiHandler: @L4: jmp NmiExit @L9: jmp NmiContinue + + +.code ;---------------------------------------------------------------------------- ;