From: Stephen Warren Date: Thu, 20 Sep 2012 09:29:03 +0000 (+0000) Subject: ARM: tegra: define CONFIG_SYS_BOOTMAPSZ X-Git-Tag: v2013.01-rc2~146^2~19 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7f1b767aea949d954e75fa635968a9d315d2e7ff;p=u-boot ARM: tegra: define CONFIG_SYS_BOOTMAPSZ This define indicates the size of the memory region where it is safe to place data passed to the Linux kernel (ATAGs, DTB, initrd). The value needs to be: a) Less than or equal to RAM size. b) Small enough that the area is not within the kernel's highmem region, since the kernel cannot access ATAGs/DTB/initrd from highmem. c) Large enough to hold the kernel+DTB+initrd. 256M seems large enough for (c) in most circumstances, and small enough to satisfy (a) and (b) across any possible Tegra board. Note that the user can override this value via environment variable "bootm_mapsize" if needed. The advantage of defining BOOTMAPSZ is that we no longer need to define variable fdt_high in the default environment. Previously, we defined this to prevent the DTB from being relocated to the very end of RAM, which on most Tegra systems is within highmem, and hence which would cause boot failures. A user can still define this variable themselves if they want the FDT to be either left in-place wherever loaded, or copied to some other specific location. Similarly, there should no longer be a strict requirement for the user to define initrd_high if using an initrd. Signed-off-by: Stephen Warren Signed-off-by: Tom Warren --- diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 9698c23dad..5d1d3ddcb7 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -143,7 +143,6 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ "fdt_load=0x01000000\0" \ - "fdt_high=01100000\0" \ BOOTCMDS_COMMON /* overrides for SPL build here */ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index dc7444d1cc..70c5cfbba8 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -171,6 +171,8 @@ #define CONFIG_SYS_TEXT_BASE 0x0010c000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */ + #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \