From: Tom Rini Date: Fri, 10 Jan 2014 15:56:00 +0000 (-0500) Subject: Merge branch 'master' of git://git.denx.de/u-boot-arm X-Git-Tag: v2014.01-rc3~9 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=7f673c99c2d8d1aa21996c5b914f06d784b080ca;p=u-boot Merge branch 'master' of git://git.denx.de/u-boot-arm Bringing in the MMC tree means that CONFIG_BOUNCE_BUFFER needed to be added to include/configs/exynos5-dt.h now. Conflicts: include/configs/exynos5250-dt.h Signed-off-by: Tom Rini --- 7f673c99c2d8d1aa21996c5b914f06d784b080ca diff --cc Makefile index cbd45a7f17,dc5ba04616..e6f6edbb3a --- a/Makefile +++ b/Makefile @@@ -336,8 -356,9 +347,9 @@@ ALL-$(CONFIG_SPL_FRAMEWORK) += $(obj)u- ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bin ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin ifneq ($(CONFIG_SPL_TARGET),) -ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET)) +ALL-$(CONFIG_SPL) += $(obj)$(CONFIG_SPL_TARGET:"%"=%) endif + ALL-$(CONFIG_REMAKE_ELF) += $(obj)u-boot.elf # enable combined SPL/u-boot/dtb rules for tegra ifneq ($(CONFIG_TEGRA),) @@@ -497,10 -523,24 +512,22 @@@ $(obj)u-boot-img.bin: $(obj)spl/u-boot- # at the start padded up to the start of the SPL image. And then concat # the SPL image to the end. $(obj)u-boot-img-spl-at-end.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.img - tr "\000" "\377" < /dev/zero | dd ibs=1 count=$(CONFIG_UBOOT_PAD_TO) \ - of=$(obj)u-boot-pad.img 2>/dev/null - dd if=$(obj)u-boot.img of=$(obj)u-boot-pad.img \ - conv=notrunc 2>/dev/null - cat $(obj)u-boot-pad.img $(obj)spl/u-boot-spl.bin > $@ + $(OBJCOPY) -I binary -O binary --pad-to=$(CONFIG_UBOOT_PAD_TO) \ + --gap-fill=0xff $(obj)u-boot.img $@ + cat $(obj)spl/u-boot-spl.bin >> $@ + # Create a new ELF from a raw binary file. This is useful for arm64 + # where static relocation needs to be performed on the raw binary, + # but certain simulators only accept an ELF file (but don't do the + # relocation). + # FIXME refactor dts/Makefile to share target/arch detection + $(obj)u-boot.elf: $(obj)u-boot.bin + @$(OBJCOPY) -B aarch64 -I binary -O elf64-littleaarch64 \ + $< $(obj)u-boot-elf.o + @$(LD) $(obj)u-boot-elf.o -o $@ \ + --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \ + -Ttext=$(CONFIG_SYS_TEXT_BASE) + ifeq ($(CONFIG_SANDBOX),y) GEN_UBOOT = \ cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \ diff --cc common/board_f.c index c2f47bc188,d918e4bb16..aa70c3e57d --- a/common/board_f.c +++ b/common/board_f.c @@@ -1008,8 -1004,18 +1003,19 @@@ void board_init_f(ulong boot_flags gd = &data; #endif + /* + * Clear global data before it is accessed at debug print + * in initcall_run_list. Otherwise the debug print probably + * get the wrong vaule of gd->have_console. + */ + #if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \ + !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \ + !defined(CONFIG_MPC86xx) && !defined(CONFIG_X86) + zero_global_data(); + #endif + gd->flags = boot_flags; + gd->have_console = 0; if (initcall_run_list(init_sequence_f)) hang(); diff --cc include/configs/exynos5-dt.h index 0000000000,d684790f8e..414db420dc mode 000000,100644..100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-dt.h @@@ -1,0 -1,290 +1,291 @@@ + /* + * Copyright (C) 2013 Samsung Electronics + * + * Configuration settings for the SAMSUNG EXYNOS5 board. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + + #ifndef __CONFIG_H + #define __CONFIG_H + + /* High Level Configuration Options */ + #define CONFIG_SAMSUNG /* in a SAMSUNG core */ + #define CONFIG_S5P /* S5P Family */ + #define CONFIG_EXYNOS5 /* which is in a Exynos5 Family */ + + #include /* get chip and board defs */ + + #define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_ARCH_CPU_INIT + #define CONFIG_DISPLAY_CPUINFO + #define CONFIG_DISPLAY_BOARDINFO + #define CONFIG_BOARD_COMMON + #define CONFIG_ARCH_EARLY_INIT_R + #define CONFIG_EXYNOS_SPL + + /* Enable fdt support for Exynos5250 */ + #define CONFIG_OF_CONTROL + #define CONFIG_OF_SEPARATE + + /* Allow tracing to be enabled */ + #define CONFIG_TRACE + #define CONFIG_CMD_TRACE + #define CONFIG_TRACE_BUFFER_SIZE (16 << 20) + #define CONFIG_TRACE_EARLY_SIZE (8 << 20) + #define CONFIG_TRACE_EARLY + #define CONFIG_TRACE_EARLY_ADDR 0x50000000 + + /* Keep L2 Cache Disabled */ + #define CONFIG_SYS_DCACHE_OFF + #define CONFIG_SYS_CACHELINE_SIZE 64 + + /* Enable ACE acceleration for SHA1 and SHA256 */ + #define CONFIG_EXYNOS_ACE_SHA + #define CONFIG_SHA_HW_ACCEL + + /* input clock of PLL: SMDK5250 has 24MHz input clock */ + #define CONFIG_SYS_CLK_FREQ 24000000 + + #define CONFIG_SETUP_MEMORY_TAGS + #define CONFIG_CMDLINE_TAG + #define CONFIG_INITRD_TAG + #define CONFIG_CMDLINE_EDITING + + /* Power Down Modes */ + #define S5P_CHECK_SLEEP 0x00000BAD + #define S5P_CHECK_DIDLE 0xBAD00000 + #define S5P_CHECK_LPA 0xABAD0000 + + /* Offset for inform registers */ + #define INFORM0_OFFSET 0x800 + #define INFORM1_OFFSET 0x804 + #define INFORM2_OFFSET 0x808 + #define INFORM3_OFFSET 0x80c + + /* Size of malloc() pool */ + #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) + + /* select serial console configuration */ + #define CONFIG_BAUDRATE 115200 + #define EXYNOS5_DEFAULT_UART_OFFSET 0x010000 + #define CONFIG_SILENT_CONSOLE + + /* Enable keyboard */ + #define CONFIG_CROS_EC /* CROS_EC protocol */ + #define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */ + #define CONFIG_CROS_EC_I2C /* Support CROS_EC over I2C */ + #define CONFIG_CROS_EC_KEYB /* CROS_EC keyboard input */ + #define CONFIG_CMD_CROS_EC + #define CONFIG_KEYBOARD + + /* Console configuration */ + #define CONFIG_CONSOLE_MUX + #define CONFIG_SYS_CONSOLE_IS_IN_ENV + #define EXYNOS_DEVICE_SETTINGS \ + "stdin=serial,cros-ec-keyb\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" + + #define CONFIG_EXTRA_ENV_SETTINGS \ + EXYNOS_DEVICE_SETTINGS + + /* SD/MMC configuration */ + #define CONFIG_GENERIC_MMC + #define CONFIG_MMC + #define CONFIG_SDHCI + #define CONFIG_S5P_SDHCI + #define CONFIG_DWMMC + #define CONFIG_EXYNOS_DWMMC + #define CONFIG_SUPPORT_EMMC_BOOT ++#define CONFIG_BOUNCE_BUFFER + + #define CONFIG_BOARD_EARLY_INIT_F + #define CONFIG_SKIP_LOWLEVEL_INIT + + /* PWM */ + #define CONFIG_PWM + + /* allow to overwrite serial and ethaddr */ + #define CONFIG_ENV_OVERWRITE + + /* Command definition*/ + #include + + #define CONFIG_CMD_PING + #define CONFIG_CMD_ELF + #define CONFIG_CMD_MMC + #define CONFIG_CMD_EXT2 + #define CONFIG_CMD_FAT + #define CONFIG_CMD_NET + #define CONFIG_CMD_HASH + + #define CONFIG_BOOTDELAY 3 + #define CONFIG_ZERO_BOOTDELAY_CHECK + + /* Thermal Management Unit */ + #define CONFIG_EXYNOS_TMU + #define CONFIG_CMD_DTT + #define CONFIG_TMU_CMD_DTT + + /* TPM */ + #define CONFIG_TPM + #define CONFIG_CMD_TPM + #define CONFIG_TPM_TIS_I2C + #define CONFIG_TPM_TIS_I2C_BUS_NUMBER 3 + #define CONFIG_TPM_TIS_I2C_SLAVE_ADDR 0x20 + + /* MMC SPL */ + #define CONFIG_SPL + #define COPY_BL2_FNPTR_ADDR 0x02020030 + + #define CONFIG_SPL_LIBCOMMON_SUPPORT + #define CONFIG_SPL_GPIO_SUPPORT + + /* specific .lds file */ + #define CONFIG_SPL_LDSCRIPT "board/samsung/common/exynos-uboot-spl.lds" + #define CONFIG_SPL_MAX_FOOTPRINT (14 * 1024) + + + /* Miscellaneous configurable options */ + #define CONFIG_SYS_LONGHELP /* undef to save memory */ + #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ + #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ + #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ + #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ + #define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0" + /* Boot Argument Buffer Size */ + #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + /* memtest works on */ + #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000) + #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) + + #define CONFIG_RD_LVL + + #define CONFIG_NR_DRAM_BANKS 8 + #define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ + #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE + #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE + #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) + #define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE + #define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) + #define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE + #define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) + #define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE + #define PHYS_SDRAM_5 (CONFIG_SYS_SDRAM_BASE + (4 * SDRAM_BANK_SIZE)) + #define PHYS_SDRAM_5_SIZE SDRAM_BANK_SIZE + #define PHYS_SDRAM_6 (CONFIG_SYS_SDRAM_BASE + (5 * SDRAM_BANK_SIZE)) + #define PHYS_SDRAM_6_SIZE SDRAM_BANK_SIZE + #define PHYS_SDRAM_7 (CONFIG_SYS_SDRAM_BASE + (6 * SDRAM_BANK_SIZE)) + #define PHYS_SDRAM_7_SIZE SDRAM_BANK_SIZE + #define PHYS_SDRAM_8 (CONFIG_SYS_SDRAM_BASE + (7 * SDRAM_BANK_SIZE)) + #define PHYS_SDRAM_8_SIZE SDRAM_BANK_SIZE + + #define CONFIG_SYS_MONITOR_BASE 0x00000000 + + /* FLASH and environment organization */ + #define CONFIG_SYS_NO_FLASH + #undef CONFIG_CMD_IMLS + + #define CONFIG_SYS_MMC_ENV_DEV 0 + + #define CONFIG_SECURE_BL1_ONLY + + /* Secure FW size configuration */ + #ifdef CONFIG_SECURE_BL1_ONLY + #define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */ + #else + #define CONFIG_SEC_FW_SIZE 0 + #endif + + /* Configuration of BL1, BL2, ENV Blocks on mmc */ + #define CONFIG_RES_BLOCK_SIZE (512) + #define CONFIG_BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ + #define CONFIG_BL2_SIZE (512UL << 10UL) /* 512 KB */ + #define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ + + #define CONFIG_BL1_OFFSET (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE) + #define CONFIG_BL2_OFFSET (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE) + #define CONFIG_ENV_OFFSET (CONFIG_BL2_OFFSET + CONFIG_BL2_SIZE) + + /* U-boot copy size from boot Media to DRAM.*/ + #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) + #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) + + #define CONFIG_SPI_BOOTING + #define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 + #define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) + + #define CONFIG_DOS_PARTITION + #define CONFIG_EFI_PARTITION + #define CONFIG_CMD_PART + #define CONFIG_PARTITION_UUIDS + + /* I2C */ + #define CONFIG_SYS_I2C_INIT_BOARD + #define CONFIG_SYS_I2C + #define CONFIG_CMD_I2C + #define CONFIG_SYS_I2C_S3C24X0_SPEED 100000 /* 100 Kbps */ + #define CONFIG_SYS_I2C_S3C24X0 + #define CONFIG_I2C_MULTI_BUS + #define CONFIG_SYS_I2C_S3C24X0_SLAVE 0x0 + #define CONFIG_I2C_EDID + + /* SPI */ + #define CONFIG_ENV_IS_IN_SPI_FLASH + #define CONFIG_SPI_FLASH + #define CONFIG_ENV_SPI_BASE 0x12D30000 + + #ifdef CONFIG_SPI_FLASH + #define CONFIG_EXYNOS_SPI + #define CONFIG_CMD_SF + #define CONFIG_CMD_SPI + #define CONFIG_SPI_FLASH_WINBOND + #define CONFIG_SPI_FLASH_GIGADEVICE + #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 + #define CONFIG_SF_DEFAULT_SPEED 50000000 + #define EXYNOS5_SPI_NUM_CONTROLLERS 5 + #define CONFIG_OF_SPI + #endif + + #ifdef CONFIG_ENV_IS_IN_SPI_FLASH + #define CONFIG_ENV_SPI_MODE SPI_MODE_0 + #define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE + #define CONFIG_ENV_SPI_BUS 1 + #define CONFIG_ENV_SPI_MAX_HZ 50000000 + #endif + + /* PMIC */ + #define CONFIG_POWER + #define CONFIG_POWER_I2C + + /* Ethernet Controllor Driver */ + #ifdef CONFIG_CMD_NET + #define CONFIG_SMC911X + #define CONFIG_SMC911X_BASE 0x5000000 + #define CONFIG_SMC911X_16_BIT + #define CONFIG_ENV_SROM_BANK 1 + #endif /*CONFIG_CMD_NET*/ + + /* Enable PXE Support */ + #ifdef CONFIG_CMD_NET + #define CONFIG_CMD_PXE + #define CONFIG_MENU + #endif + + /* Enable devicetree support */ + #define CONFIG_OF_LIBFDT + + /* SHA hashing */ + #define CONFIG_CMD_HASH + #define CONFIG_HASH_VERIFY + #define CONFIG_SHA1 + #define CONFIG_SHA256 + + /* Enable Time Command */ + #define CONFIG_CMD_TIME + + #define CONFIG_CMD_BOOTZ + + #endif /* __CONFIG_H */