From: Bill Cook Date: Wed, 25 May 2011 19:51:07 +0000 (-0400) Subject: MPC83XX: Fix PCI express clock setup X-Git-Tag: v2011.09-rc1~253 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=810cb19003ffe0115d10700fc512a2a743916f20;p=u-boot MPC83XX: Fix PCI express clock setup On a 8308 based board it was found that the PEX_GLK_RATIO register (programmed in arch/powerpc/cpu/mpc83xx/pcie.c) was getting set to 0, This was tracked to the fact that the pci express clock frequency was not being assigned to the pciexp1_clk entry in the global data structure in file arch/powerpc/cpu/mpc83xx/speed.c. Fix this and a similiar issue in 'do_clocks' command. Signed-off-by: Bill Cook Signed-off-by: Kim Phillips --- diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c index 1eca1a8f26..4542ab1ac4 100644 --- a/arch/powerpc/cpu/mpc83xx/speed.c +++ b/arch/powerpc/cpu/mpc83xx/speed.c @@ -483,7 +483,8 @@ int get_clocks(void) gd->qe_clk = qe_clk; gd->brg_clk = brg_clk; #endif -#if defined(CONFIG_MPC837x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC837x) gd->pciexp1_clk = pciexp1_clk; gd->pciexp2_clk = pciexp2_clk; #endif @@ -543,7 +544,8 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_MPC834x) printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk)); #endif -#if defined(CONFIG_MPC837x) +#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \ + defined(CONFIG_MPC837x) printf(" PCIEXP1: %-4s MHz\n", strmhz(buf, gd->pciexp1_clk)); printf(" PCIEXP2: %-4s MHz\n", strmhz(buf, gd->pciexp2_clk)); #endif