From: Simon Glass Date: Mon, 31 Aug 2015 01:19:19 +0000 (-0600) Subject: arm: Remove otc570 board X-Git-Tag: v2015.10-rc4~144 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=819216ddfab1e81430086fd0c8e7f187c38dd81a;p=u-boot arm: Remove otc570 board This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass --- diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index de06416da5..cb2994c281 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -103,10 +103,6 @@ config TARGET_MEESC bool "Support meesc" select CPU_ARM926EJS -config TARGET_OTC570 - bool "Support otc570" - select CPU_ARM926EJS - config TARGET_CORVUS bool "Support corvus" select CPU_ARM926EJS @@ -144,7 +140,6 @@ source "board/BuS/vl_ma2sc/Kconfig" source "board/calao/usb_a9263/Kconfig" source "board/egnite/ethernut5/Kconfig" source "board/esd/meesc/Kconfig" -source "board/esd/otc570/Kconfig" source "board/mini-box/picosam9g45/Kconfig" source "board/ronetix/pm9261/Kconfig" source "board/ronetix/pm9263/Kconfig" diff --git a/board/esd/otc570/Kconfig b/board/esd/otc570/Kconfig deleted file mode 100644 index 4966f5f755..0000000000 --- a/board/esd/otc570/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OTC570 - -config SYS_BOARD - default "otc570" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "otc570" - -endif diff --git a/board/esd/otc570/MAINTAINERS b/board/esd/otc570/MAINTAINERS deleted file mode 100644 index a7e165d8ba..0000000000 --- a/board/esd/otc570/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -OTC570 BOARD -M: Daniel Gorsulowski -S: Maintained -F: board/esd/otc570/ -F: include/configs/otc570.h -F: configs/otc570_defconfig -F: configs/otc570_dataflash_defconfig diff --git a/board/esd/otc570/Makefile b/board/esd/otc570/Makefile deleted file mode 100644 index 740bb0a282..0000000000 --- a/board/esd/otc570/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2008 -# Stelian Pop -# Lead Tech Design -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += otc570.o -obj-$(CONFIG_HAS_DATAFLASH) += partition.o diff --git a/board/esd/otc570/otc570.c b/board/esd/otc570/otc570.c deleted file mode 100644 index 4751d0a9e9..0000000000 --- a/board/esd/otc570/otc570.c +++ /dev/null @@ -1,372 +0,0 @@ -/* - * (C) Copyright 2010-2011 - * Daniel Gorsulowski - * esd electronic system design gmbh - * - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_LCD -# include -# include -# ifdef CONFIG_LCD_INFO -# include -# include -# endif -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -static int hw_rev = -1; /* hardware revision */ - -int get_hw_rev(void) -{ - if (hw_rev >= 0) - return hw_rev; - - hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19); - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1; - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2; - hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3; - - if (hw_rev == 15) - hw_rev = 0; - - return hw_rev; -} - -#ifdef CONFIG_CMD_NAND -static void otc570_nand_hw_init(void) -{ - unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0; - at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX; - - /* Enable CS3 */ - csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A; - writel(csa, &matrix->csa[0]); - - /* Configure SMC CS3 for NAND/SmartMedia */ - writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) | - AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(2), - &smc->cs[3].setup); - - writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) | - AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3), - &smc->cs[3].pulse); - - writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(6), - &smc->cs[3].cycle); - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | - AT91_SMC_MODE_EXNW_DISABLE | - AT91_SMC_MODE_DBW_8 | - AT91_SMC_MODE_TDF_CYCLE(12), - &smc->cs[3].mode); - - /* Configure RDY/BSY */ - gpio_direction_input(CONFIG_SYS_NAND_READY_PIN); - - /* Enable NandFlash */ - gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); -} -#endif /* CONFIG_CMD_NAND */ - -#ifdef CONFIG_MACB -static void otc570_macb_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - /* Enable clock */ - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); - at91_macb_hw_init(); -} -#endif - -/* - * Static memory controller initialization to enable Beckhoff ET1100 EtherCAT - * controller debugging - * The ET1100 is located at physical address 0x70000000 - * Its process memory is located at physical address 0x70001000 - */ -static void otc570_ethercat_hw_init(void) -{ - at91_smc_t *smc1 = (at91_smc_t *) ATMEL_BASE_SMC1; - - /* Configure SMC EBI1_CS0 for EtherCAT */ - writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) | - AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0), - &smc1->cs[0].setup); - writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) | - AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9), - &smc1->cs[0].pulse); - writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6), - &smc1->cs[0].cycle); - /* - * Configure behavior at external wait signal, byte-select mode, 16 bit - * data bus width, none data float wait states and TDF optimization - */ - writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY | - AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) | - AT91_SMC_MODE_TDF, &smc1->cs[0].mode); - - /* Configure RDY/BSY */ - at91_set_b_periph(AT91_PIO_PORTE, 20, 0); /* EBI1_NWAIT */ -} - -#ifdef CONFIG_LCD -/* Number of columns and rows, pixel clock in Hz and hsync/vsync polarity */ -vidinfo_t panel_info = { - .vl_col = 640, - .vl_row = 480, - .vl_clk = 25175000, - .vl_sync = ATMEL_LCDC_INVLINE_INVERTED | - ATMEL_LCDC_INVFRAME_INVERTED, - - .vl_bpix = LCD_BPP,/* Bits per pixel, 0 = 1bit, 3 = 8bit */ - .vl_tft = 1, /* 0 = passive, 1 = TFT */ - .vl_vsync_len = 1, /* Length of vertical sync in NOL */ - .vl_upper_margin = 35, /* Idle lines at the frame start */ - .vl_lower_margin = 5, /* Idle lines at the end of the frame */ - .vl_hsync_len = 5, /* Width of the LCDHSYNC pulse */ - .vl_left_margin = 112, /* Idle cycles at the line beginning */ - .vl_right_margin = 1, /* Idle cycles at the end of the line */ - - .mmio = ATMEL_BASE_LCDC, -}; - -void lcd_enable(void) -{ - at91_set_pio_value(AT91_PIO_PORTA, 30, 0); /* power up */ -} - -void lcd_disable(void) -{ - at91_set_pio_value(AT91_PIO_PORTA, 30, 1); /* power down */ -} - -static void otc570_lcd_hw_init(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */ - at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */ - at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */ - at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */ - at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */ - at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */ - at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */ - at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */ - at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */ - at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */ - at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */ - at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */ - at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */ - at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */ - at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */ - at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */ - at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */ - at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */ - at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */ - at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */ - at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */ - at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */ - at91_set_pio_output(AT91_PIO_PORTA, 30, 1); /* PCI */ - - writel(1 << ATMEL_ID_LCDC, &pmc->pcer); -} - -#ifdef CONFIG_LCD_INFO -void lcd_show_board_info(void) -{ - ulong dram_size, nand_size; - int i; - char temp[32]; - - dram_size = 0; - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) - dram_size += gd->bd->bi_dram[i].size; - nand_size = 0; - for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) - nand_size += nand_info[i].size; - - lcd_printf("\n%s\n", U_BOOT_VERSION); - lcd_printf("CPU at %s MHz\n", strmhz(temp, get_cpu_clk_rate())); - lcd_printf(" %ld MB SDRAM, %ld MB NAND\n", - dram_size >> 20, - nand_size >> 20 ); - lcd_printf(" Board : esd ARM9 HMI Panel - OTC570\n"); - lcd_printf(" Hardware-revision: 1.%d\n", get_hw_rev()); - lcd_printf(" Mach-type : %lu\n", gd->bd->bi_arch_number); -} -#endif /* CONFIG_LCD_INFO */ -#endif /* CONFIG_LCD */ - -int dram_init(void) -{ - gd->ram_size = get_ram_size( - (void *)CONFIG_SYS_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE); - return 0; -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00); -#endif - return rc; -} - -int checkboard(void) -{ - char str[32]; - - puts("Board : esd ARM9 HMI Panel - OTC570"); - if (getenv_f("serial#", str, sizeof(str)) > 0) { - puts(", serial# "); - puts(str); - } - printf("\n"); - printf("Hardware-revision: 1.%d\n", get_hw_rev()); - printf("Mach-type : %lu\n", gd->bd->bi_arch_number); - return 0; -} - -#ifdef CONFIG_SERIAL_TAG -void get_board_serial(struct tag_serialnr *serialnr) -{ - char *str; - - char *serial = getenv("serial#"); - if (serial) { - str = strchr(serial, '_'); - if (str && (strlen(str) >= 4)) { - serialnr->high = (*(str + 1) << 8) | *(str + 2); - serialnr->low = simple_strtoul(str + 3, NULL, 16); - } - } else { - serialnr->high = 0; - serialnr->low = 0; - } -} -#endif - -#ifdef CONFIG_REVISION_TAG -u32 get_board_rev(void) -{ - return hw_rev | 0x100; -} -#endif - -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) -{ - char str[64]; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - at91_set_pio_output(AT91_PIO_PORTA, 29, 1); - at91_set_a_periph(AT91_PIO_PORTA, 26, 1); /* TXD0 */ - at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* RXD0 */ - writel(1 << ATMEL_ID_USART0, &pmc->pcer); - /* Set USART_MODE = 1 (RS485) */ - writel(1, 0xFFF8C004); - - printf("USART0: "); - - if (getenv_f("usart0", str, sizeof(str)) == -1) { - printf("No entry - assuming 1-wire\n"); - /* CTS pin, works as mode select pin (0 = 1-wire; 1 = RS485) */ - at91_set_pio_output(AT91_PIO_PORTA, 29, 0); - } else { - if (strcmp(str, "1-wire") == 0) { - printf("%s\n", str); - at91_set_pio_output(AT91_PIO_PORTA, 29, 0); - } else if (strcmp(str, "rs485") == 0) { - printf("%s\n", str); - at91_set_pio_output(AT91_PIO_PORTA, 29, 1); - } else { - printf("Wrong entry - assuming 1-wire "); - printf("(valid values are '1-wire' or 'rs485')\n"); - at91_set_pio_output(AT91_PIO_PORTA, 29, 0); - } - } -#ifdef CONFIG_LCD - printf("Display memory address: 0x%08lX\n", gd->fb_base); -#endif - - return 0; -} -#endif /* CONFIG_MISC_INIT_R */ - -int board_early_init_f(void) -{ - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - - /* enable all clocks */ - writel((1 << ATMEL_ID_PIOA) | - (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOCDE) | - (1 << ATMEL_ID_TWI) | - (1 << ATMEL_ID_SPI0) | -#ifdef CONFIG_LCD - (1 << ATMEL_ID_LCDC) | -#endif - (1 << ATMEL_ID_UHP), - &pmc->pcer); - - at91_seriald_hw_init(); - - /* arch number of OTC570-Board */ - gd->bd->bi_arch_number = MACH_TYPE_OTC570; - - return 0; -} - -int board_init(void) -{ - /* initialize ET1100 Controller */ - otc570_ethercat_hw_init(); - - /* adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - -#ifdef CONFIG_CMD_NAND - otc570_nand_hw_init(); -#endif -#ifdef CONFIG_HAS_DATAFLASH - at91_spi0_hw_init(1 << 0); -#endif -#ifdef CONFIG_MACB - otc570_macb_hw_init(); -#endif -#ifdef CONFIG_AT91_CAN - at91_can_hw_init(); -#endif -#ifdef CONFIG_USB_OHCI_NEW - at91_uhp_hw_init(); -#endif -#ifdef CONFIG_LCD - otc570_lcd_hw_init(); -#endif - return 0; -} diff --git a/board/esd/otc570/partition.c b/board/esd/otc570/partition.c deleted file mode 100644 index b6afafc239..0000000000 --- a/board/esd/otc570/partition.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * (C) Copyright 2008 - * Ulf Samuelsson - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include - -AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS]; - -struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = { - {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ -}; - -/* define the area offsets */ -dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { - {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, - {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, - {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, -}; diff --git a/configs/otc570_dataflash_defconfig b/configs/otc570_dataflash_defconfig deleted file mode 100644 index c5ff59a5a2..0000000000 --- a/configs/otc570_dataflash_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_OTC570=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/configs/otc570_defconfig b/configs/otc570_defconfig deleted file mode 100644 index 8cc55eea8c..0000000000 --- a/configs/otc570_defconfig +++ /dev/null @@ -1,8 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_AT91=y -CONFIG_TARGET_OTC570=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_LOADS is not set -# CONFIG_CMD_FPGA is not set -# CONFIG_CMD_SETEXPR is not set diff --git a/include/configs/otc570.h b/include/configs/otc570.h deleted file mode 100644 index 0cada63ef7..0000000000 --- a/include/configs/otc570.h +++ /dev/null @@ -1,252 +0,0 @@ -/* - * (C) Copyright 2010-2011 - * Daniel Gorsulowski - * esd electronic system design gmbh - * - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * Configuation settings for the esd OTC570 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * SoC must be defined first, before hardware.h is included. - * In this case SoC is defined in boards.cfg. - */ -#include - -/* - * Warning: changing CONFIG_SYS_TEXT_BASE requires - * adapting the initial boot program. - * Since the linker has to swallow that define, we must use a pure - * hex number here! - */ -#define CONFIG_SYS_TEXT_BASE 0x20002000 - -/* - * since a number of boards are not being listed in linux - * arch/arm/tools/mach-types any more, the mach-types have to be - * defined here - */ -#define MACH_TYPE_OTC570 2166 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */ -#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */ - -/* Misc CPU related */ -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */ -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG -#define CONFIG_SERIAL_TAG -#define CONFIG_REVISION_TAG -#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ -#define CONFIG_MISC_INIT_R /* Call misc_init_r */ - -#define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */ -#define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */ -#define CONFIG_PREBOOT /* enable preboot variable */ - -/* - * Hardware drivers - */ - -/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */ -#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP - -/* general purpose I/O */ -#define CONFIG_AT91_GPIO - -/* Console output */ -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID ATMEL_ID_SYS -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK - -/* LCD */ -#define CONFIG_LCD -#undef CONFIG_SPLASH_SCREEN - -#ifdef CONFIG_LCD -# define LCD_BPP LCD_COLOR8 - -# ifndef CONFIG_SPLASH_SCREEN -# define CONFIG_LCD_LOGO -# define CONFIG_LCD_INFO -# undef CONFIG_LCD_INFO_BELOW_LOGO -# endif /* CONFIG_SPLASH_SCREEN */ - -# undef LCD_TEST_PATTERN -# define CONFIG_SYS_WHITE_ON_BLACK -# define CONFIG_ATMEL_LCD -# define CONFIG_SYS_CONSOLE_IS_IN_ENV -# define CONFIG_OTC570_LCD_BASE (CONFIG_SYS_SDRAM_BASE + 0x03fa5000) -# define CONFIG_CMD_BMP -#endif /* CONFIG_LCD */ - -/* RTC and I2C stuff */ -#define CONFIG_RTC_DS1338 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#ifdef CONFIG_SYS_I2C_SOFT -#define CONFIG_SYS_I2C_SOFT_SPEED 100000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F - -/* Configure data and clock pins for pio */ -# define I2C_INIT { \ - at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \ - at91_set_pio_output(AT91_PIO_PORTB, 5, 0); \ -} -# define I2C_SOFT_DECLARATIONS -/* Configure data pin as output */ -# define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTB, 4, 0) -/* Configure data pin as input */ -# define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTB, 4, 0) -/* Read data pin */ -# define I2C_READ at91_get_pio_value(AT91_PIO_PORTB, 4) -/* Set data pin */ -# define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTB, 4, bit) -/* Set clock pin */ -# define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTB, 5, bit) -# define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ -#endif /* CONFIG_SYS_I2C_SOFT */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NAND -#define CONFIG_CMD_USB -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DATE - -/* LED */ -#define CONFIG_AT91_LED - -/* - * SDRAM: 1 bank, min 32, max 128 MB - * Initialized before u-boot gets started. - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_SDRAM_BASE 0x20000000 /* ATMEL_BASE_CS1 */ -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 - -#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x00100000) -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01E00000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00100000) - -/* - * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, - * leaving the correct space for initial global data structure above - * that address while providing maximum stack area below. - */ -#define CONFIG_SYS_INIT_SP_ADDR \ - (ATMEL_BASE_SRAM0 + 0x1000 - GENERATED_GBL_DATA_SIZE) - -/* DataFlash */ -#ifdef CONFIG_SYS_USE_DATAFLASH -# define CONFIG_ATMEL_DATAFLASH_SPI -# define CONFIG_HAS_DATAFLASH -# define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 -# define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */ -# define AT91_SPI_CLK 15000000 -# define DATAFLASH_TCSS (0x1a << 16) -# define DATAFLASH_TCHS (0x1 << 24) -#endif - -/* NOR flash is not populated, disable it */ -#define CONFIG_SYS_NO_FLASH - -/* NAND flash */ -#ifdef CONFIG_CMD_NAND -# define CONFIG_NAND_ATMEL -# define CONFIG_SYS_MAX_NAND_DEVICE 1 -# define CONFIG_SYS_NAND_BASE 0x40000000 /* ATMEL_BASE_CS3 */ -# define CONFIG_SYS_NAND_DBW_8 -# define CONFIG_SYS_NAND_MASK_ALE (1 << 21) -# define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -# define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(15) -# define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(22) -#endif - -/* Ethernet */ -#define CONFIG_MACB -#define CONFIG_RMII -#define CONFIG_FIT -#define CONFIG_NET_RETRY_COUNT 20 -#undef CONFIG_RESET_PHY_R - -/* USB */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_DOS_PARTITION -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_USB_STORAGE -#define CONFIG_CMD_FAT - -/* CAN */ -#define CONFIG_AT91_CAN - -/* hw-controller addresses */ -#define CONFIG_ET1100_BASE 0x70000000 /* ATMEL_BASE_CS6 */ - -#ifdef CONFIG_SYS_USE_DATAFLASH - -/* bootstrap + u-boot + env in dataflash on CS0 */ -# define CONFIG_ENV_IS_IN_DATAFLASH -# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ - 0x8400) -# define CONFIG_ENV_OFFSET 0x4200 -# define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \ - CONFIG_ENV_OFFSET) -# define CONFIG_ENV_SIZE 0x4200 - -#elif CONFIG_SYS_USE_NANDFLASH - -/* bootstrap + u-boot + env + linux in nandflash */ -# define CONFIG_ENV_IS_IN_NAND 1 -# define CONFIG_ENV_OFFSET 0xC0000 -# define CONFIG_ENV_SIZE 0x20000 - -#endif - -#define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ - 128*1024, 0x1000) - -#endif