From: Aneesh Bansal Date: Mon, 18 Apr 2016 17:28:33 +0000 (+0530) Subject: powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache X-Git-Tag: v2016.07-rc1~172^2~2 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=82eda68444fa4d026bcf1f59c7c0d044ddbcb193;p=u-boot powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache While enabling L2 cache, the value of L2PE (L2 cache parity/ECC error checking enable) must not be changed while the L2 cache is enabled. So, L2PE must be set before enabling L2 cache. Signed-off-by: Aneesh Bansal Reviewed-by: York Sun --- diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 82a151a0d0..4c51225868 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -720,16 +720,39 @@ enable_l2_cluster_l2: ori r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l sync stw r4, 0(r3) /* invalidate L2 */ + /* Poll till the bits are cleared */ 1: sync lwz r0, 0(r3) twi 0, r0, 0 isync and. r1, r0, r4 bne 1b + + /* L2PE must be set before L2 cache is enabled */ + lis r4, (L2CSR0_L2PE)@h + ori r4, r4, (L2CSR0_L2PE)@l + sync + stw r4, 0(r3) /* enable L2 parity/ECC error checking */ + /* Poll till the bit is set */ +1: sync + lwz r0, 0(r3) + twi 0, r0, 0 + isync + and. r1, r0, r4 + beq 1b + lis r4, (L2CSR0_L2E|L2CSR0_L2PE)@h ori r4, r4, (L2CSR0_L2REP_MODE)@l sync stw r4, 0(r3) /* enable L2 */ + /* Poll till the bit is set */ +1: sync + lwz r0, 0(r3) + twi 0, r0, 0 + isync + and. r1, r0, r4 + beq 1b + delete_ccsr_l2_tlb: delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 #endif