From: Hans de Goede Date: Thu, 18 Aug 2016 18:51:12 +0000 (+0200) Subject: sunxi: Sync dts files with upstream kernel X-Git-Tag: v2016.09~62^2~3 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=860fbdd41f010348757926ca8f9c65dd00616d1e;p=u-boot sunxi: Sync dts files with upstream kernel Sync dts files with the current (Aug 18th 2016) state of Maxime's linux/sunxi/for-next repo. Note this commit also updates configs/MSI_Primo81_defconfig, adding: "# CONFIG_REQUIRE_SERIAL_CONSOLE is not set", this is necessary because the tablet does not have a reachable uart so the dts sync drops its serial0 alias. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 459233c30a..6d1b94c863 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -208,6 +208,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-ainol-aw1.dtb \ sun7i-a20-bananapi.dtb \ + sun7i-a20-bananapi-m1-plus.dtb \ sun7i-a20-bananapro.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ @@ -222,6 +223,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-olimex-som-evb.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ + sun7i-a20-olinuxino-lime2-emmc.dtb \ sun7i-a20-olinuxino-micro.dtb \ sun7i-a20-orangepi.dtb \ sun7i-a20-orangepi-mini.dtb \ @@ -248,6 +250,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \ sun8i-a83t-cubietruck-plus.dtb \ sun8i-a83t-sinovoip-bpi-m3.dtb dtb-$(CONFIG_MACH_SUN8I_H3) += \ + sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-lite.dtb \ sun8i-h3-orangepi-one.dtb \ diff --git a/arch/arm/dts/axp209.dtsi b/arch/arm/dts/axp209.dtsi index 051ab3ba9a..afbe89c01d 100644 --- a/arch/arm/dts/axp209.dtsi +++ b/arch/arm/dts/axp209.dtsi @@ -87,6 +87,7 @@ reg_ldo5: ldo5 { regulator-name = "ldo5"; + status = "disabled"; }; }; diff --git a/arch/arm/dts/axp809.dtsi b/arch/arm/dts/axp809.dtsi new file mode 100644 index 0000000000..ab8e5f2d92 --- /dev/null +++ b/arch/arm/dts/axp809.dtsi @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP809 Integrated Power Management Chip + */ + +&axp809 { + compatible = "x-powers,axp809"; + interrupt-controller; + #interrupt-cells = <1>; +}; diff --git a/arch/arm/dts/sun4i-a10-a1000.dts b/arch/arm/dts/sun4i-a10-a1000.dts index 97570cb7f2..39e368ec34 100644 --- a/arch/arm/dts/sun4i-a10-a1000.dts +++ b/arch/arm/dts/sun4i-a10-a1000.dts @@ -72,8 +72,9 @@ }; blue { - label = "a1000:blue:usr"; + label = "a1000:blue:pwr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; @@ -84,9 +85,28 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &ahci { @@ -188,6 +208,12 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun4i-a10-hackberry.dts b/arch/arm/dts/sun4i-a10-hackberry.dts index 2b17c51991..6de83a6187 100644 --- a/arch/arm/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/dts/sun4i-a10-hackberry.dts @@ -66,6 +66,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts index 43f58fbe16..9103864fef 100644 --- a/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/dts/sun4i-a10-hyundai-a7hd.dts @@ -87,6 +87,30 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb0_vbus { + status = "okay"; +}; + ®_usb2_vbus { gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ status = "okay"; @@ -102,7 +126,17 @@ allwinner,pins = "PH6"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/dts/sun4i-a10-jesurun-q5.dts index 7afc7a64ee..e28f080b1f 100644 --- a/arch/arm/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/dts/sun4i-a10-jesurun-q5.dts @@ -80,6 +80,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ }; diff --git a/arch/arm/dts/sun4i-a10.dtsi b/arch/arm/dts/sun4i-a10.dtsi index 2c8f5e6ad9..7e7dfc2b43 100644 --- a/arch/arm/dts/sun4i-a10.dtsi +++ b/arch/arm/dts/sun4i-a10.dtsi @@ -65,8 +65,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&de_be0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; @@ -74,8 +75,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, + clocks = <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -84,9 +86,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, - <&ahb_gates 46>, <&dram_gates 25>, - <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>, + <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -94,8 +96,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + clocks = <&ahb_gates 34>, <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 5>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -184,6 +188,15 @@ clock-output-names = "osc24M"; }; + osc3M: osc3M_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -208,6 +221,23 @@ "pll2-4x", "pll2-8x"; }; + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll3>; + clock-output-names = "pll3-2x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -232,6 +262,23 @@ clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll7>; + clock-output-names = "pll7-2x"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -477,6 +524,17 @@ clock-output-names = "ir1"; }; + spdif_clk: clk@01c200c0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200c0 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "spdif"; + }; + usb_clk: clk@01c200cc { #clock-cells = <1>; #reset-cells = <1>; @@ -520,6 +578,81 @@ "dram_de_mp", "dram_ace"; }; + de_be0_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be0"; + }; + + de_be1_clk: clk@01c20108 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20108 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be1"; + }; + + de_fe0_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe0"; + }; + + de_fe1_clk: clk@01c20110 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20110 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe1"; + }; + + + tcon0_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch0-sclk"; + + }; + + tcon1_ch0_clk: clk@01c2011c { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2011c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch0-sclk"; + + }; + + tcon0_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch1-sclk"; + + }; + + tcon1_ch1_clk: clk@01c20130 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c20130 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch1-sclk"; + + }; + ve_clk: clk@01c2013c { #clock-cells = <0>; #reset-cells = <0>; @@ -588,6 +721,19 @@ #dma-cells = <2>; }; + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <37>; + clocks = <&ahb_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -827,69 +973,62 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = ; - allwinner,pull = ; - }; - - pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; allwinner,drive = ; allwinner,pull = ; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; allwinner,drive = ; allwinner,pull = ; }; - uart0_pins_b: uart0@1 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; allwinner,drive = ; allwinner,pull = ; }; - uart1_pins_a: uart1@0 { - allwinner,pins = "PA10", "PA11"; - allwinner,function = "uart1"; + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; allwinner,drive = ; allwinner,pull = ; }; - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; + allwinner,function = "ir0"; allwinner,drive = ; allwinner,pull = ; }; - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; allwinner,drive = ; allwinner,pull = ; }; - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; allwinner,drive = ; allwinner,pull = ; }; - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; + allwinner,function = "ir1"; allwinner,drive = ; allwinner,pull = ; }; @@ -909,34 +1048,41 @@ allwinner,pull = ; }; - ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; allwinner,drive = ; allwinner,pull = ; }; - ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; allwinner,drive = ; allwinner,pull = ; }; - ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; allwinner,drive = ; allwinner,pull = ; }; - ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; allwinner,drive = ; allwinner,pull = ; }; + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB13"; + allwinner,function = "spdif"; + allwinner,drive = ; + allwinner,pull = ; + }; + spi0_pins_a: spi0@0 { allwinner,pins = "PI11", "PI12", "PI13"; allwinner,function = "spi0"; @@ -993,16 +1139,23 @@ allwinner,pull = ; }; - ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; allwinner,drive = ; allwinner,pull = ; }; - ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; + uart0_pins_b: uart0@1 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = ; + allwinner,pull = ; + }; + + uart1_pins_a: uart1@0 { + allwinner,pins = "PA10", "PA11"; + allwinner,function = "uart1"; allwinner,drive = ; allwinner,pull = ; }; @@ -1034,6 +1187,19 @@ status = "disabled"; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <13>; + clocks = <&apb0_gates 1>, <&spdif_clk>; + clock-names = "apb", "spdif"; + dmas = <&dma SUN4I_DMA_NORMAL 2>, + <&dma SUN4I_DMA_NORMAL 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + ir0: ir@01c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; diff --git a/arch/arm/dts/sun5i-a10s-mk802.dts b/arch/arm/dts/sun5i-a10s-mk802.dts index 46ff940782..23b0114eb4 100644 --- a/arch/arm/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/dts/sun5i-a10s-mk802.dts @@ -73,6 +73,20 @@ status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp152: pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; @@ -83,10 +97,23 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &ohci0 { status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_mk802: led_pins@0 { allwinner,pins = "PB2"; @@ -122,6 +149,11 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts index 86d046a502..aef91476f9 100644 --- a/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a10s-olinuxino-micro.dts @@ -248,6 +248,13 @@ status = "okay"; }; +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/dts/sun5i-a10s-wobo-i5.dts index 9fea918f94..b5de75f4c7 100644 --- a/arch/arm/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/dts/sun5i-a10s-wobo-i5.dts @@ -79,6 +79,7 @@ regulator-name = "emac-3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + startup-delay-us = <20000>; enable-active-high; gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>; }; @@ -195,7 +196,14 @@ regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; + regulator-name = "vcc-wifi1"; +}; + +®_ldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi2"; }; ®_usb1_vbus { diff --git a/arch/arm/dts/sun5i-a10s.dtsi b/arch/arm/dts/sun5i-a10s.dtsi index a5f8855389..c41a2ba34d 100644 --- a/arch/arm/dts/sun5i-a10s.dtsi +++ b/arch/arm/dts/sun5i-a10s.dtsi @@ -65,8 +65,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 43>, <&ahb_gates 44>; status = "disabled"; }; @@ -74,7 +74,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, + <&ahb_gates 44>; status = "disabled"; }; @@ -82,8 +83,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>; + clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>, + <&ahb_gates 36>, <&ahb_gates 44>; status = "disabled"; }; }; @@ -242,18 +243,18 @@ allwinner,pull = ; }; - nand_cs2_pins_a: nand_cs@2 { - allwinner,pins = "PC17"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + spi2_pins_a: spi2@0 { + allwinner,pins = "PB12", "PB13", "PB14"; + allwinner,function = "spi2"; + allwinner,drive = ; + allwinner,pull = ; }; - nand_cs3_pins_a: nand_cs@3 { - allwinner,pins = "PC18"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; + spi2_cs0_pins_a: spi2_cs0@0 { + allwinner,pins = "PB11"; + allwinner,function = "spi2"; + allwinner,drive = ; + allwinner,pull = ; }; }; diff --git a/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts index 6546fa0290..894c4c4f9a 100644 --- a/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts +++ b/arch/arm/dts/sun5i-a13-difrnce-dit4350.dts @@ -42,185 +42,9 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include -#include -#include -#include -#include +#include "sun5i-reference-design-tablet.dtsi" / { model = "Difrnce DIT4350"; compatible = "difrnce,dit4350", "allwinner,sun5i-a13"; - - aliases { - serial0 = &uart1; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - /* TODO: backlight uses axp gpio1 as enable pin */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_d709: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-pll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -®_usb0_vbus { - gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb0_vbus_pin_a { - allwinner,pins = "PG12"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_ldo3>; - status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts index ad84fe4276..081329e2b8 100644 --- a/arch/arm/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/dts/sun5i-a13-olinuxino-micro.dts @@ -109,6 +109,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { allwinner,pins = "PG0"; @@ -124,6 +128,27 @@ allwinner,pull = ; }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_pin_olinuxinom: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { allwinner,pins = "PG11"; allwinner,function = "gpio_out"; @@ -132,6 +157,12 @@ }; }; +®_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_olinuxinom>; + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; @@ -144,7 +175,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a13-olinuxino.dts b/arch/arm/dts/sun5i-a13-olinuxino.dts index 30e069a6cf..b3c234c65e 100644 --- a/arch/arm/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/dts/sun5i-a13-olinuxino.dts @@ -155,21 +155,6 @@ status = "okay"; }; -&nfc { - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; - status = "okay"; - - nand@0 { - #address-cells = <2>; - #size-cells = <2>; - reg = <0>; - allwinner,rb = <0>; - nand-ecc-mode = "hw"; - allwinner,randomize; - }; -}; - &ohci0 { status = "okay"; }; diff --git a/arch/arm/dts/sun5i-a13-q8-tablet.dts b/arch/arm/dts/sun5i-a13-q8-tablet.dts index 72e93acb5a..a89f29fa3e 100644 --- a/arch/arm/dts/sun5i-a13-q8-tablet.dts +++ b/arch/arm/dts/sun5i-a13-q8-tablet.dts @@ -42,19 +42,45 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sun5i-q8-common.dtsi" +#include "sun5i-reference-design-tablet.dtsi" / { model = "Q8 A13 Tablet"; compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; + + panel: panel { + compatible = "urt,umsh-8596md-t", "simple-panel"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + /* TODO: lcd panel uses axp gpio0 as enable pin */ + backlight = <&backlight>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; +}; + +&be0 { + status = "okay"; }; -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; }; -&usbphy { - usb1_vbus-supply = <®_ldo3>; +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; }; diff --git a/arch/arm/dts/sun5i-a13-utoo-p66.dts b/arch/arm/dts/sun5i-a13-utoo-p66.dts index fa9ddfdcfe..a8b0bcc045 100644 --- a/arch/arm/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/dts/sun5i-a13-utoo-p66.dts @@ -42,24 +42,20 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include -#include +#include "sun5i-reference-design-tablet.dtsi" #include -#include -#include / { model = "Utoo P66"; compatible = "utoo,p66", "allwinner,sun5i-a13"; - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - /* Note levels of 10 / 20% result in backlight off */ - brightness-levels = <0 30 40 50 60 70 80 90 100>; - default-brightness-level = <6>; - /* TODO: backlight uses axp gpio1 as enable pin */ + /* The P66 uses the uart pins as gpios */ + aliases { + /delete-property/serial0; + }; + + chosen { + /delete-property/stdout-path; }; i2c_lcd: i2c@0 { @@ -73,39 +69,21 @@ }; }; -&codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; - allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; +&backlight { + /* Note levels of 10 / 20% result in backlight off */ + brightness-levels = <0 30 40 50 60 70 80 90 100>; + default-brightness-level = <6>; }; -&ehci0 { - status = "okay"; +&codec { + allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; +&codec_pa_pin { + allwinner,pins = "PG3"; }; -#include "axp209.dtsi" - &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - icn8318: touchscreen@40 { compatible = "chipone,icn8318"; reg = <0x40>; @@ -119,40 +97,6 @@ touchscreen-inverted-x; touchscreen-swapped-x-y; }; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; }; &mmc2 { @@ -170,39 +114,7 @@ }; }; -&otg_sram { - status = "okay"; -}; - &pio { - codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PG3"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_cd_pin_p66: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - i2c_lcd_pins: i2c_lcd_pin@0 { allwinner,pins = "PG10", "PG12"; allwinner,function = "gpio_out"; @@ -217,67 +129,17 @@ allwinner,pull = ; }; - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-pll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; }; ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - status = "okay"; }; -&usb_otg { - dr_mode = "otg"; - status = "okay"; +&uart1 { + /* The P66 uses the uart pins as gpios */ + status = "disabled"; }; -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_ldo3>; - status = "okay"; +&usb0_vbus_pin_a { + allwinner,pins = "PB4"; }; diff --git a/arch/arm/dts/sun5i-a13.dtsi b/arch/arm/dts/sun5i-a13.dtsi index d910d3a6c4..e012890e0c 100644 --- a/arch/arm/dts/sun5i-a13.dtsi +++ b/arch/arm/dts/sun5i-a13.dtsi @@ -61,7 +61,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; + clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&de_be_clk>, + <&tcon_ch0_clk>, <&dram_gates 26>; status = "disabled"; }; }; @@ -110,8 +111,8 @@ <10>, <13>, <14>, <20>, <21>, <22>, - <28>, <32>, <36>, - <40>, <44>, + <28>, <32>, <34>, + <36>, <40>, <44>, <46>, <51>, <52>; clock-output-names = "ahb_usbotg", "ahb_ehci", @@ -120,8 +121,8 @@ "ahb_mmc2", "ahb_nand", "ahb_sdram", "ahb_spi0", "ahb_spi1", "ahb_spi2", - "ahb_stimer", "ahb_ve", "ahb_lcd", - "ahb_csi", "ahb_de_be", + "ahb_stimer", "ahb_ve", "ahb_tve", + "ahb_lcd", "ahb_csi", "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400"; }; @@ -149,9 +150,107 @@ "apb1_i2c2", "apb1_uart1", "apb1_uart3"; }; + + dram_gates: clk@01c20100 { + #clock-cells = <1>; + compatible = "allwinner,sun5i-a13-dram-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01c20100 0x4>; + clocks = <&pll5 0>; + clock-indices = <0>, + <1>, + <25>, + <26>, + <29>, + <31>; + clock-output-names = "dram_ve", + "dram_csi", + "dram_de_fe", + "dram_de_be", + "dram_ace", + "dram_iep"; + }; + + de_be_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be"; + }; + + de_fe_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe"; + }; + + tcon_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch0-sclk"; + }; + + tcon_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon-ch1-sclk"; + }; + }; + + display-engine { + compatible = "allwinner,sun5i-a13-display-engine"; + allwinner,pipelines = <&fe0>; }; soc@01c00000 { + tcon0: lcd-controller@01c0c000 { + compatible = "allwinner,sun5i-a13-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&tcon_ch0_clk 1>; + reset-names = "lcd"; + clocks = <&ahb_gates 36>, + <&tcon_ch0_clk>, + <&tcon_ch1_clk>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon-pixel-clock"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; @@ -159,6 +258,75 @@ #pwm-cells = <3>; status = "disabled"; }; + + fe0: display-frontend@01e00000 { + compatible = "allwinner,sun5i-a13-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ahb_gates 46>, <&de_fe_clk>, + <&dram_gates 25>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_fe_clk>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@01e60000 { + compatible = "allwinner,sun5i-a13-display-backend"; + reg = <0x01e60000 0x10000>; + clocks = <&ahb_gates 44>, <&de_be_clk>, + <&dram_gates 26>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_be_clk>; + status = "disabled"; + + assigned-clocks = <&de_be_clk>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + }; + }; + }; }; }; @@ -181,6 +349,16 @@ &pio { compatible = "allwinner,sun5i-a13-pinctrl"; + lcd_rgb666_pins: lcd_rgb666@0 { + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + allwinner,function = "lcd0"; + allwinner,drive = ; + allwinner,pull = ; + }; + uart1_pins_a: uart1@0 { allwinner,pins = "PE10", "PE11"; allwinner,function = "uart1"; diff --git a/arch/arm/dts/sun5i-r8-chip.dts b/arch/arm/dts/sun5i-r8-chip.dts index b1b62d5116..7a8cc27279 100644 --- a/arch/arm/dts/sun5i-r8-chip.dts +++ b/arch/arm/dts/sun5i-r8-chip.dts @@ -52,7 +52,7 @@ / { model = "NextThing C.H.I.P."; - compatible = "nextthing,chip", "allwinner,sun5i-r8"; + compatible = "nextthing,chip", "allwinner,sun5i-r8", "allwinner,sun5i-a13"; aliases { i2c0 = &i2c0; @@ -78,6 +78,10 @@ }; }; +&be0 { + status = "okay"; +}; + &codec { status = "okay"; }; @@ -142,21 +146,6 @@ status = "okay"; }; -&nfc { - pinctrl-names = "default"; - pinctrl-0 = <&nand_pins_a &nand_cs0_pins_a &nand_rb0_pins_a>; - status = "okay"; - - nand@0 { - #address-cells = <2>; - #size-cells = <2>; - reg = <0>; - allwinner,rb = <0>; - nand-ecc-mode = "hw"; - nand-on-flash-bbt; - }; -}; - &ohci0 { status = "okay"; }; @@ -240,6 +229,14 @@ status = "okay"; }; +&tcon0 { + status = "okay"; +}; + +&tve0 { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins_b>; diff --git a/arch/arm/dts/sun5i-r8.dtsi b/arch/arm/dts/sun5i-r8.dtsi index 0ef865601a..8b058f53b7 100644 --- a/arch/arm/dts/sun5i-r8.dtsi +++ b/arch/arm/dts/sun5i-r8.dtsi @@ -51,9 +51,37 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>; + clocks = <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, <&de_be_clk>, + <&tcon_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; }; + + soc@01c00000 { + tve0: tv-encoder@01c0a000 { + compatible = "allwinner,sun4i-a10-tv-encoder"; + reg = <0x01c0a000 0x1000>; + clocks = <&ahb_gates 34>; + resets = <&tcon_ch0_clk 0>; + status = "disabled"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + tve0_in_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_tve0>; + }; + }; + }; + }; +}; + +&tcon0_out { + tcon0_out_tve0: endpoint@1 { + reg = <1>; + remote-endpoint = <&tve0_in_tcon0>; + }; }; diff --git a/arch/arm/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/dts/sun5i-reference-design-tablet.dtsi new file mode 100644 index 0000000000..20cc940f5f --- /dev/null +++ b/arch/arm/dts/sun5i-reference-design-tablet.dtsi @@ -0,0 +1,210 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-reference-design-tablet.dtsi" + +#include + +/ { + aliases { + serial0 = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + /* TODO: backlight uses axp gpio1 as enable pin */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +&i2c1 { + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +#include "axp209.dtsi" + +&lradc { + vref-supply = <®_ldo2>; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PG10"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun5i.dtsi b/arch/arm/dts/sun5i.dtsi index 87e535301a..e374f4fc80 100644 --- a/arch/arm/dts/sun5i.dtsi +++ b/arch/arm/dts/sun5i.dtsi @@ -88,6 +88,15 @@ clock-output-names = "osc24M"; }; + osc3M: osc3M_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -112,6 +121,23 @@ "pll2-4x", "pll2-8x"; }; + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2_clk { + compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll3>; + clock-output-names = "pll3-2x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; @@ -136,6 +162,23 @@ clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <2>; + clocks = <&pll7>; + clock-output-names = "pll7-2x"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -356,17 +399,6 @@ #dma-cells = <2>; }; - nfc: nand@01c03000 { - compatible = "allwinner,sun4i-a10-nand"; - reg = <0x01c03000 0x1000>; - interrupts = <37>; - clocks = <&ahb_gates 13>, <&nand_clk>; - clock-names = "ahb", "mod"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -559,44 +591,6 @@ allwinner,pull = ; }; - nand_pins_a: nand_base0@0 { - allwinner,pins = "PC0", "PC1", "PC2", - "PC5", "PC8", "PC9", "PC10", - "PC11", "PC12", "PC13", "PC14", - "PC15"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - nand_cs0_pins_a: nand_cs@0 { - allwinner,pins = "PC4"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - nand_cs1_pins_a: nand_cs@1 { - allwinner,pins = "PC3"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - nand_rb0_pins_a: nand_rb@0 { - allwinner,pins = "PC6"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - - nand_rb1_pins_a: nand_rb@1 { - allwinner,pins = "PC7"; - allwinner,function = "nand0"; - allwinner,drive = <0>; - allwinner,pull = <0>; - }; - uart3_pins_a: uart3@0 { allwinner,pins = "PG9", "PG10"; allwinner,function = "uart3"; diff --git a/arch/arm/dts/sun6i-a31-m9.dts b/arch/arm/dts/sun6i-a31-m9.dts index 6e0e5687a0..29016a13a2 100644 --- a/arch/arm/dts/sun6i-a31-m9.dts +++ b/arch/arm/dts/sun6i-a31-m9.dts @@ -65,12 +65,17 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "m9:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -84,6 +89,7 @@ pinctrl-0 = <&gmac_pins_mii_a>; phy = <&phy1>; phy-mode = "mii"; + phy-supply = <®_dldo1>; status = "okay"; phy1: ethernet-phy@1 { @@ -100,13 +106,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + &pio { led_pins_m9: led_pins@0 { allwinner,pins = "PH13"; @@ -130,6 +149,78 @@ }; }; +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ethernet-phy"; +}; + +/* + * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached + * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is + * marked as regulator-always-on. + */ +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-hub"; +}; + ®_usb1_vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; @@ -145,5 +236,6 @@ &usbphy { usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_aldo1>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts index 4dd70cce21..5faeae429e 100644 --- a/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/dts/sun6i-a31-mele-a1000g-quad.dts @@ -65,12 +65,17 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "a1000g:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -84,6 +89,7 @@ pinctrl-0 = <&gmac_pins_mii_a>; phy = <&phy1>; phy-mode = "mii"; + phy-supply = <®_dldo1>; status = "okay"; phy1: ethernet-phy@1 { @@ -100,13 +106,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + &pio { led_pins_m9: led_pins@0 { allwinner,pins = "PH13"; @@ -130,6 +149,78 @@ }; }; +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ethernet-phy"; +}; + +/* + * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached + * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is + * marked as regulator-always-on. + */ +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-hub"; +}; + ®_usb1_vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; @@ -150,5 +241,6 @@ &usbphy { usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_aldo1>; status = "okay"; }; diff --git a/arch/arm/dts/sun6i-a31.dtsi b/arch/arm/dts/sun6i-a31.dtsi index 1867af24ff..b674bf79bc 100644 --- a/arch/arm/dts/sun6i-a31.dtsi +++ b/arch/arm/dts/sun6i-a31.dtsi @@ -469,7 +469,8 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb1_gates 8>, <&mmc0_clk 0>, @@ -488,7 +489,8 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ahb1_gates 9>, <&mmc1_clk 0>, @@ -507,7 +509,8 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ahb1_gates 10>, <&mmc2_clk 0>, @@ -526,7 +529,8 @@ }; mmc3: mmc@01c12000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c12000 0x1000>; clocks = <&ahb1_gates 11>, <&mmc3_clk 0>, diff --git a/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts index e182eec6d8..882a4d89fa 100644 --- a/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts +++ b/arch/arm/dts/sun6i-a31s-colorfly-e708-q1.dts @@ -42,32 +42,11 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include +#include "sun6i-reference-design-tablet.dtsi" / { model = "Colorfly E708 Q1 tablet"; compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc3>; -}; - -&ehci0 { - /* rtl8188etv wifi is connected here */ - status = "okay"; }; &lradc { @@ -82,103 +61,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>; - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; - status = "okay"; -}; - -&pio { - mma8452_int_e708_q1: mma8452_int_pin@0 { - allwinner,pins = "PA9"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&p2wi { - status = "okay"; - - axp22x: pmic@68 { - compatible = "x-powers,axp221"; - reg = <0x68>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; -}; - -#include "axp22x.dtsi" - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpus"; /* This is an educated guess */ -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-gpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc4 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-sys-dll"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_dldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - ®_dldo2 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -186,23 +68,5 @@ }; &simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; vcc-pg-supply = <®_dldo2>; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp221 pmic on the board. - * - * Once we have axp221 power-supply and vbus-usb support we should switch - * to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - usb1_vbus-supply = <®_dldo1>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun6i-a31s-primo81.dts b/arch/arm/dts/sun6i-a31s-primo81.dts index 379746a397..73c133f5e7 100644 --- a/arch/arm/dts/sun6i-a31s-primo81.dts +++ b/arch/arm/dts/sun6i-a31s-primo81.dts @@ -53,14 +53,6 @@ / { model = "MSI Primo81 tablet"; compatible = "msi,primo81", "allwinner,sun6i-a31s"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &cpu0 { @@ -184,8 +176,6 @@ }; ®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; regulator-name = "vcc-lcd"; }; diff --git a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index 360adfb1e9..d6ad6196a7 100644 --- a/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -135,8 +135,6 @@ ®_dc1sw { regulator-name = "vcc-lcd-usb2"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; }; ®_dc5ldo { diff --git a/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts new file mode 100644 index 0000000000..ba5bca0fe9 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-bananapi-m1-plus.dts @@ -0,0 +1,229 @@ +/* + * Copyright 2016 Luo Yi + * + * Thanks to the original work by Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include + +/ { + model = "Banana Pi BPI-M1-Plus"; + compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bpi_m1p>; + + green { + label = "bananapi-m1-plus:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "bananapi-m1-plus:pwr:usr"; + gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>; + reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */ + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bpi_m1p>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; + }; +}; + +&ahci { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + enable-sdio-wakeup; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&mmc3_pins_a { + /* AP6210 requires pull-up */ + allwinner,pull = ; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + gmac_power_pin_bpi_m1p: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_bpi_m1p: led_pins@0 { + allwinner,pins = "PH24", "PH25"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun7i-a20-cubietruck.dts b/arch/arm/dts/sun7i-a20-cubietruck.dts index 8da939ab83..83f39b0362 100644 --- a/arch/arm/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/dts/sun7i-a20-cubietruck.dts @@ -94,6 +94,24 @@ pinctrl-0 = <&mmc3_pwrseq_pin_cubietruck>; reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &ahci { @@ -301,6 +319,12 @@ status = "okay"; }; +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun7i-a20-itead-ibox.dts b/arch/arm/dts/sun7i-a20-itead-ibox.dts index 661c21d9bd..10d48cbf81 100644 --- a/arch/arm/dts/sun7i-a20-itead-ibox.dts +++ b/arch/arm/dts/sun7i-a20-itead-ibox.dts @@ -65,6 +65,24 @@ default-state = "on"; }; }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board SPDIF"; + + simple-audio-card,cpu { + sound-dai = <&spdif>; + }; + + simple-audio-card,codec { + sound-dai = <&spdif_out>; + }; + }; + + spdif_out: spdif-out { + #sound-dai-cells = <0>; + compatible = "linux,spdif-dit"; + }; }; &ahci { @@ -123,3 +141,9 @@ ®_ahci_5v { status = "okay"; }; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/dts/sun7i-a20-lamobo-r1.dts index 5ee43d8bf1..73c05dab0a 100644 --- a/arch/arm/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts @@ -95,6 +95,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -110,13 +114,67 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + switch: ethernet-switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + label = "lan2"; + }; + + port1: port@1 { + reg = <1>; + label = "lan3"; + }; + + port2: port@2 { + reg = <2>; + label = "lan4"; + }; + + port3: port@3 { + reg = <3>; + label = "wan"; + }; + + port4: port@4 { + reg = <4>; + label = "lan1"; + }; + + port8: port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; }; @@ -158,10 +216,6 @@ status = "okay"; }; -&ohci1 { - status = "okay"; -}; - &otg_sram { status = "okay"; }; @@ -199,7 +253,7 @@ #include "axp209.dtsi" ®_ahci_5v { - gpio = <&pio 1 3 0>; /* PB3 */ + gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ status = "okay"; }; @@ -232,11 +286,8 @@ status = "okay"; }; -®_usb1_vbus { - status = "okay"; -}; - ®_usb2_vbus { + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ status = "okay"; }; @@ -275,13 +326,16 @@ status = "okay"; }; +&usb2_vbus_pin_a { + allwinner,pins = "PH12"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts new file mode 100644 index 0000000000..5ea4915f6d --- /dev/null +++ b/arch/arm/dts/sun7i-a20-olinuxino-lime2-emmc.dts @@ -0,0 +1,82 @@ + /* + * Copyright 2015 - Ultimaker B.V. + * Author Olliver Schinagl + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun7i-a20-olinuxino-lime2.dts" + +/ { + model = "Olimex A20-OLinuXino-LIME2-eMMC"; + compatible = "olimex,a20-olinuxino-lime2-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: pwrseq { + pinctrl-0 = <&mmc2_pins_nrst>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>; + }; +}; + +&pio { + mmc2_pins_nrst: mmc2@0 { + allwinner,pins = "PC16"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&mmc2_pwrseq>; + status = "okay"; + + emmc: emmc@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi index 0940a788f8..4394711e5a 100644 --- a/arch/arm/dts/sun7i-a20.dtsi +++ b/arch/arm/dts/sun7i-a20.dtsi @@ -67,8 +67,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&de_be0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; @@ -76,7 +77,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>, + clocks = <&ahb_gates 36>, <&ahb_gates 44>, + <&de_be0_clk>, <&tcon0_ch0_clk>, <&dram_gates 26>; status = "disabled"; }; @@ -85,8 +87,10 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, + <&de_be0_clk>, <&tcon0_ch1_clk>, + <&dram_gates 5>, <&dram_gates 26>; status = "disabled"; }; }; @@ -186,6 +190,15 @@ clock-output-names = "osc24M"; }; + osc3M: osc3M_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <8>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc3M"; + }; + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -210,6 +223,23 @@ "pll2-4x", "pll2-8x"; }; + pll3: clk@01c20010 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20010 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll3"; + }; + + pll3x2: pll3x2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&pll3>; + clock-div = <1>; + clock-mult = <2>; + clock-output-names = "pll3-2x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-pll4-clk"; @@ -235,6 +265,23 @@ "pll6_div_4"; }; + pll7: clk@01c20030 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll3-clk"; + reg = <0x01c20030 0x4>; + clocks = <&osc3M>; + clock-output-names = "pll7"; + }; + + pll7x2: pll7x2_clk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&pll7>; + clock-div = <1>; + clock-mult = <2>; + clock-output-names = "pll7-2x"; + }; + pll8: clk@01c20040 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-pll4-clk"; @@ -324,9 +371,9 @@ <5>, <6>, <7>, <8>, <10>; clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_iis0", "apb0_iis1", + "apb0_ac97", "apb0_i2s0", "apb0_i2s1", "apb0_pio", "apb0_ir0", "apb0_ir1", - "apb0_iis2", "apb0_keypad"; + "apb0_i2s2", "apb0_keypad"; }; apb1: clk@01c20058 { @@ -476,6 +523,39 @@ clock-output-names = "ir1"; }; + i2s0_clk: clk@01c200b8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200b8 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s0"; + }; + + ac97_clk: clk@01c200bc { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200bc 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "ac97"; + }; + + spdif_clk: clk@01c200c0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200c0 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "spdif"; + }; + keypad_clk: clk@01c200c4 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod0-clk"; @@ -502,6 +582,28 @@ clock-output-names = "spi3"; }; + i2s1_clk: clk@01c200d8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200d8 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s1"; + }; + + i2s2_clk: clk@01c200dc { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200dc 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s2"; + }; + dram_gates: clk@01c20100 { #clock-cells = <1>; compatible = "allwinner,sun4i-a10-dram-gates-clk"; @@ -527,6 +629,80 @@ "dram_de_mp", "dram_ace"; }; + de_be0_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be0"; + }; + + de_be1_clk: clk@01c20108 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20108 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be1"; + }; + + de_fe0_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe0"; + }; + + de_fe1_clk: clk@01c20110 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20110 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe1"; + }; + + tcon0_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch0-sclk"; + + }; + + tcon1_ch0_clk: clk@01c2011c { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2011c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch0-sclk"; + + }; + + tcon0_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch1-sclk"; + + }; + + tcon1_ch1_clk: clk@01c20130 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c20130 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch1-sclk"; + + }; + ve_clk: clk@01c2013c { #clock-cells = <0>; #reset-cells = <0>; @@ -670,6 +846,19 @@ #dma-cells = <2>; }; + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = ; + clocks = <&ahb_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -716,7 +905,8 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb_gates 8>, <&mmc0_clk 0>, @@ -733,7 +923,8 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ahb_gates 9>, <&mmc1_clk 0>, @@ -750,7 +941,8 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ahb_gates 10>, <&mmc2_clk 0>, @@ -767,7 +959,8 @@ }; mmc3: mmc@01c12000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c12000 0x1000>; clocks = <&ahb_gates 11>, <&mmc3_clk 0>, @@ -902,160 +1095,177 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; + clk_out_a_pins_a: clk_out_a@0 { + allwinner,pins = "PI12"; + allwinner,function = "clk_out_a"; allwinner,drive = ; allwinner,pull = ; }; - pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; + clk_out_b_pins_a: clk_out_b@0 { + allwinner,pins = "PI13"; + allwinner,function = "clk_out_b"; allwinner,drive = ; allwinner,pull = ; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; allwinner,drive = ; allwinner,pull = ; }; - uart2_pins_a: uart2@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; - allwinner,function = "uart2"; + gmac_pins_mii_a: gmac_mii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "gmac"; allwinner,drive = ; allwinner,pull = ; }; - uart3_pins_a: uart3@0 { - allwinner,pins = "PG6", "PG7", "PG8", "PG9"; - allwinner,function = "uart3"; - allwinner,drive = ; + gmac_pins_rgmii_a: gmac_rgmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA10", + "PA11", "PA12", "PA13", + "PA15", "PA16"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + allwinner,drive = ; allwinner,pull = ; }; - uart3_pins_b: uart3@1 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "uart3"; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; allwinner,drive = ; allwinner,pull = ; }; - uart4_pins_a: uart4@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "uart4"; + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; allwinner,drive = ; allwinner,pull = ; }; - uart4_pins_b: uart4@1 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "uart4"; + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; allwinner,drive = ; allwinner,pull = ; }; - uart5_pins_a: uart5@0 { - allwinner,pins = "PI10", "PI11"; - allwinner,function = "uart5"; + i2c3_pins_a: i2c3@0 { + allwinner,pins = "PI0", "PI1"; + allwinner,function = "i2c3"; allwinner,drive = ; allwinner,pull = ; }; - uart6_pins_a: uart6@0 { - allwinner,pins = "PI12", "PI13"; - allwinner,function = "uart6"; - allwinner,drive = ; - allwinner,pull = ; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; + allwinner,function = "ir0"; + allwinner,drive = ; + allwinner,pull = ; }; - uart7_pins_a: uart7@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "uart7"; - allwinner,drive = ; - allwinner,pull = ; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = ; + allwinner,pull = ; }; - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = ; - allwinner,pull = ; + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = ; + allwinner,pull = ; }; - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = ; - allwinner,pull = ; + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; + allwinner,function = "ir1"; + allwinner,drive = ; + allwinner,pull = ; }; - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = ; + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = ; allwinner,pull = ; }; - i2c3_pins_a: i2c3@0 { - allwinner,pins = "PI0", "PI1"; - allwinner,function = "i2c3"; + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; allwinner,drive = ; + allwinner,pull = ; + }; + + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; + allwinner,function = "mmc2"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + allwinner,function = "mmc3"; + allwinner,drive = ; allwinner,pull = ; }; - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; allwinner,drive = ; allwinner,pull = ; }; - clk_out_a_pins_a: clk_out_a@0 { - allwinner,pins = "PI12"; - allwinner,function = "clk_out_a"; + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; allwinner,drive = ; allwinner,pull = ; }; - clk_out_b_pins_a: clk_out_b@0 { - allwinner,pins = "PI13"; - allwinner,function = "clk_out_b"; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; allwinner,drive = ; allwinner,pull = ; }; - gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "gmac"; + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; allwinner,drive = ; allwinner,pull = ; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA10", - "PA11", "PA12", "PA13", - "PA15", "PA16"; - allwinner,function = "gmac"; - /* - * data lines in RGMII mode use DDR mode - * and need a higher signal drive strength - */ - allwinner,drive = ; - allwinner,pull = ; + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB13"; + allwinner,function = "spdif"; + allwinner,drive = ; + allwinner,pull = ; }; spi0_pins_a: spi0@0 { @@ -1121,75 +1331,65 @@ allwinner,pull = ; }; - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = ; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; + allwinner,drive = ; allwinner,pull = ; }; - mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; + uart2_pins_a: uart2@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "uart2"; allwinner,drive = ; - allwinner,pull = ; - }; - - mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", - "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = ; - allwinner,pull = ; + allwinner,pull = ; }; - mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4", "PI5", "PI6", - "PI7", "PI8", "PI9"; - allwinner,function = "mmc3"; - allwinner,drive = ; + uart3_pins_a: uart3@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart3"; + allwinner,drive = ; allwinner,pull = ; }; - ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = ; - allwinner,pull = ; + uart3_pins_b: uart3@1 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "uart3"; + allwinner,drive = ; + allwinner,pull = ; }; - ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = ; - allwinner,pull = ; + uart4_pins_a: uart4@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "uart4"; + allwinner,drive = ; + allwinner,pull = ; }; - ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = ; - allwinner,pull = ; + uart4_pins_b: uart4@1 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "uart4"; + allwinner,drive = ; + allwinner,pull = ; }; - ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = ; - allwinner,pull = ; + uart5_pins_a: uart5@0 { + allwinner,pins = "PI10", "PI11"; + allwinner,function = "uart5"; + allwinner,drive = ; + allwinner,pull = ; }; - ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; + uart6_pins_a: uart6@0 { + allwinner,pins = "PI12", "PI13"; + allwinner,function = "uart6"; allwinner,drive = ; allwinner,pull = ; }; - ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; + uart7_pins_a: uart7@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "uart7"; allwinner,drive = ; allwinner,pull = ; }; @@ -1226,6 +1426,19 @@ status = "disabled"; }; + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-spdif"; + reg = <0x01c21000 0x400>; + interrupts = ; + clocks = <&apb0_gates 1>, <&spdif_clk>; + clock-names = "apb", "spdif"; + dmas = <&dma SUN4I_DMA_NORMAL 2>, + <&dma SUN4I_DMA_NORMAL 2>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + ir0: ir@01c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; @@ -1244,6 +1457,32 @@ status = "disabled"; }; + i2s1: i2s@01c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22000 0x400>; + interrupts = ; + clocks = <&apb0_gates 4>, <&i2s1_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 4>, + <&dma SUN4I_DMA_NORMAL 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s0: i2s@01c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22400 0x400>; + interrupts = ; + clocks = <&apb0_gates 3>, <&i2s0_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 3>, + <&dma SUN4I_DMA_NORMAL 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; @@ -1269,6 +1508,19 @@ reg = <0x01c23800 0x200>; }; + i2s2: i2s@01c24400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c24400 0x400>; + interrupts = ; + clocks = <&apb0_gates 8>, <&i2s2_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 6>, + <&dma SUN4I_DMA_NORMAL 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + rtp: rtp@01c25000 { compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; diff --git a/arch/arm/dts/sun8i-a23-a33.dtsi b/arch/arm/dts/sun8i-a23-a33.dtsi index 7e05e09e61..f97c38f097 100644 --- a/arch/arm/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/dts/sun8i-a23-a33.dtsi @@ -266,7 +266,8 @@ }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb1_gates 8>, <&mmc0_clk 0>, @@ -285,7 +286,8 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ahb1_gates 9>, <&mmc1_clk 0>, @@ -304,7 +306,8 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ahb1_gates 10>, <&mmc2_clk 0>, diff --git a/arch/arm/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/dts/sun8i-a23-gt90h-v4.dts index b2ce284a65..da55b5a6d0 100644 --- a/arch/arm/dts/sun8i-a23-gt90h-v4.dts +++ b/arch/arm/dts/sun8i-a23-gt90h-v4.dts @@ -42,70 +42,26 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include -#include +#include "sun8i-reference-design-tablet.dtsi" / { model = "Allwinner GT90H Dual Core Tablet (v4)"; compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_gt90h>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ehci0 { status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; +&gsl1680 { + compatible = "silead,gsl3675"; + touchscreen-fw-name = "silead/gsl3675-gt90h.fw"; + touchscreen-size-x = <1792>; + touchscreen-size-y = <1024>; status = "okay"; }; &lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; - button@600 { label = "Back"; linux,code = ; @@ -114,144 +70,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>; - vmmc-supply = <®_aldo1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - bl_en_pin_gt90h: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_cd_pin_gt90h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_dldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - &usbphy { usb1_vbus-supply = <®_dldo1>; - status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a23-inet86dz.dts b/arch/arm/dts/sun8i-a23-inet86dz.dts index 0405258941..99720218b7 100644 --- a/arch/arm/dts/sun8i-a23-inet86dz.dts +++ b/arch/arm/dts/sun8i-a23-inet86dz.dts @@ -42,252 +42,24 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include -#include +#include "sun8i-reference-design-tablet.dtsi" / { model = "INet-86DZ Rev 01"; compatible = "primux,inet86dz", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_inet86dz>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ehci0 { status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - /* - * The gsl1680 is rated at 400KHz and it will not work reliable at - * 100KHz, this has been confirmed on multiple different tablets. - * The gsl1680 is the only device on this bus. - */ - clock-frequency = <400000>; - - gsl1680: touchscreen@40 { - compatible = "silead,gsl1680"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin_inet86dz>; - power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - touchscreen-size-x = <960>; - touchscreen-size-y = <640>; - touchscreen-max-fingers = <5>; - touchscreen-fw-name = "silead/gsl1680-inet86dz.fw"; - }; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet86dz>; - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - bl_en_pin_inet86dz: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_cd_pin_inet86dz: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - ts_power_pin_inet86dz: ts_power_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH8"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - x-powers,drive-vbus-en; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_dldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -®_drivevbus { - regulator-name = "usb0-vbus"; - status = "okay"; -}; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { +&gsl1680 { + touchscreen-size-x = <960>; + touchscreen-size-y = <640>; + touchscreen-fw-name = "silead/gsl1680-inet86dz.fw"; status = "okay"; }; &usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ - usb0_vbus_power-supply = <&usb_power_supply>; - usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_dldo1>; - status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts index bb2f0734ef..f23ca63828 100644 --- a/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts +++ b/arch/arm/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -42,251 +42,68 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include -#include +#include "sun8i-reference-design-tablet.dtsi" / { model = "Polaroid MID2407PXE03 tablet"; compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23"; aliases { - serial0 = &r_uart; + ethernet0 = &esp8089; }; - backlight: backlight { - compatible = "pwm-backlight"; + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_mid2407>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; + pinctrl-0 = <&wifi_pwrseq_pin_mid2407>; + reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ + /* The esp8089 needs 200 ms after driving wifi-en high */ + post-power-on-delay-ms = <200>; }; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; +&gsl1680 { + vddio-supply = <®_ldo_io1>; + touchscreen-size-x = <960>; + touchscreen-size-y = <640>; + touchscreen-inverted-x; + touchscreen-inverted-y; + touchscreen-fw-name = "silead/gsl1680-polaroid-mid2407pxe03.fw"; status = "okay"; - /* - * The gsl1680 is rated at 400KHz and it will not work reliable at - * 100KHz, this has been confirmed on multiple different tablets. - * The gsl1680 is the only device on this bus. - */ - clock-frequency = <400000>; - - gsl1680: touchscreen@40 { - compatible = "silead,gsl1680"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_power_pin_mid2407>; - power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - touchscreen-size-x = <960>; - touchscreen-size-y = <640>; - touchscreen-inverted-x; - touchscreen-inverted-y; - touchscreen-max-fingers = <5>; - touchscreen-fw-name = "silead/gsl1680-polaroid-mid2407pxe03.fw"; - }; }; -&i2c1 { +&mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; status = "okay"; - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; + esp8089: sdio_wifi@1 { + compatible = "esp,esp8089"; + reg = <1>; + esp,crystal-26M-en = <2>; }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mid2407>; - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; +&mmc1_pins_a { + allwinner,pull = ; }; -&pio { - bl_en_pin_mid2407: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_cd_pin_mid2407: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; - - ts_power_pin_mid2407: ts_power_pin@0 { - allwinner,pins = "PH1"; +&r_pio { + wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 { + allwinner,pins = "PL6"; allwinner,function = "gpio_out"; allwinner,drive = ; allwinner,pull = ; }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PH8"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - x-powers,drive-vbus-en; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_drivevbus { - regulator-name = "usb0-vbus"; - status = "okay"; }; ®_ldo_io1 { - regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-name = "vcc-touchscreen"; status = "okay"; }; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb_power_supply { - status = "okay"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>; - usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ - usb0_vbus_power-supply = <&usb_power_supply>; - usb0_vbus-supply = <®_drivevbus>; - status = "okay"; -}; diff --git a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts index cb5daafcb7..8e8f3e0846 100644 --- a/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -42,202 +42,59 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include -#include +#include "sun8i-reference-design-tablet.dtsi" / { model = "Polaroid MID2809PXE04 tablet"; compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23"; aliases { - serial0 = &r_uart; + ethernet0 = &esp8089; }; - backlight: backlight { - compatible = "pwm-backlight"; + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_mid2809>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; + pinctrl-0 = <&wifi_pwrseq_pin_mid2809>; + reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ + /* The esp8089 needs 200 ms after driving wifi-en high */ + post-power-on-delay-ms = <200>; }; }; -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; +&gsl1680 { + compatible = "silead,gsl3670"; + touchscreen-fw-name = "silead/gsl3670-polaroid-mid2809pxe04.fw"; + touchscreen-size-x = <1660>; + touchscreen-size-y = <890>; status = "okay"; }; -&i2c1 { +&mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; status = "okay"; - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; + esp8089: sdio_wifi@1 { + compatible = "esp,esp8089"; + reg = <1>; + esp,crystal-26M-en = <2>; }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mid2809>; - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; +&mmc1_pins_a { + allwinner,pull = ; }; -&pio { - bl_en_pin_mid2809: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; +&r_pio { + wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 { + allwinner,pins = "PL6"; + allwinner,function = "gpio_out"; allwinner,drive = ; allwinner,pull = ; }; - - mmc0_cd_pin_mid2809: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a23-q8-tablet.dts b/arch/arm/dts/sun8i-a23-q8-tablet.dts index 6062ea7a99..956320a6cc 100644 --- a/arch/arm/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/dts/sun8i-a23-q8-tablet.dts @@ -48,18 +48,3 @@ model = "Q8 A23 Tablet"; compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts index 1aefc6793e..2fea1af212 100644 --- a/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/dts/sun8i-a33-ga10h-v1.1.dts @@ -42,22 +42,15 @@ /dts-v1/; #include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include +#include "sun8i-reference-design-tablet.dtsi" / { model = "Allwinner GA10H Quad Core Tablet (v1.1)"; compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33"; aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; + /* Make u-boot set mac-address for rtl8703as (no eeprom) */ + ethernet0 = &rtl8703as; }; }; @@ -65,36 +58,16 @@ status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; +&gsl1680 { + compatible = "silead,gsl3675"; + touchscreen-fw-name = "silead/gsl3675-ga10h.fw"; + touchscreen-size-x = <1630>; + touchscreen-size-y = <990>; + touchscreen-inverted-y; status = "okay"; }; &lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; - button@600 { label = "Back"; linux,code = ; @@ -103,40 +76,19 @@ }; }; -&mmc0 { +&mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_dldo1>; bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; + non-removable; status = "okay"; -}; -&ohci0 { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + rtl8703as: sdio_wifi@1 { + reg = <1>; }; }; -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { +&ohci0 { status = "okay"; }; diff --git a/arch/arm/dts/sun8i-a33-q8-tablet.dts b/arch/arm/dts/sun8i-a33-q8-tablet.dts index 44b32296a0..b0bc2360f8 100644 --- a/arch/arm/dts/sun8i-a33-q8-tablet.dts +++ b/arch/arm/dts/sun8i-a33-q8-tablet.dts @@ -48,18 +48,3 @@ model = "Q8 A33 Tablet"; compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts new file mode 100644 index 0000000000..f3b1d5f6db --- /dev/null +++ b/arch/arm/dts/sun8i-h3-bananapi-m2-plus.dts @@ -0,0 +1,195 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Banana Pi BPI-M2-Plus"; + compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led_bpi_m2p>; + + pwr_led { + label = "bananapi-m2-plus:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_bpi_m2p>; + + sw4 { + label = "power"; + linux,code = ; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_bpi_m2p>; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&r_pio { + pwr_led_bpi_m2p: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + sw_r_bpi_m2p: key_pins@0 { + allwinner,pins = "PL3"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + wifi_en_bpi_m2p: wifi_en_pin { + allwinner,pins = "PL7"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is on as long as VCC-IO is on */ + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts index d3f8f550a2..f89fe00dde 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts @@ -54,6 +54,8 @@ aliases { serial0 = &uart0; + /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ + ethernet1 = &rtl8189; }; chosen { @@ -131,6 +133,14 @@ bus-width = <4>; non-removable; status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + rtl8189: sdio_wifi@1 { + reg = <1>; + }; }; &pio { @@ -184,16 +194,3 @@ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; - -&emac { - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - phy-mode = "rgmii"; - phy = <&phy1>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - diff --git a/arch/arm/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/dts/sun8i-h3-orangepi-lite.dts index ac7174914e..1550fee1ec 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-lite.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-lite.dts @@ -54,7 +54,7 @@ aliases { /* The H3 emac is not used so the wifi is ethernet0 */ - ethernet1 = &rtl8189ftv; + ethernet0 = &rtl8189ftv; serial0 = &uart0; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts index 9a8cdd46e7..851fd2c2cc 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc-plus.dts @@ -44,7 +44,8 @@ #include "sun8i-h3-orangepi-pc.dts" / { - model = "Xunlong Orange Pi PC / PC Plus"; + model = "Xunlong Orange Pi PC Plus"; + compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3"; aliases { /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts index 0a74a9193b..24f8e974c4 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts @@ -63,34 +63,26 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; - status_led { - label = "status:red:user"; - gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; - }; - }; - - r_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_r_opc>; - - tx { - label = "pwr:green:user"; + pwr_led { + label = "orangepi:green:pwr"; gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; default-state = "on"; }; + + status_led { + label = "orangepi:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; }; r_gpio_keys { compatible = "gpio-keys"; - input-name = "sw4"; - pinctrl-names = "default"; pinctrl-0 = <&sw_r_opc>; - sw4@0 { + sw4 { label = "sw4"; linux,code = ; gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; @@ -156,7 +148,7 @@ }; sw_r_opc: key_pins@0 { - allwinner,pins = "PL03"; + allwinner,pins = "PL3"; allwinner,function = "gpio_in"; allwinner,drive = ; allwinner,pull = ; @@ -177,10 +169,8 @@ &emac { phy = <&phy1>; phy-mode = "mii"; - allwinner,use-internal-phy; allwinner,leds-active-low; status = "okay"; - phy1: ethernet-phy@1 { reg = <1>; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts index 28f74f6ffd..4f4bb0f3c0 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts @@ -58,6 +58,18 @@ enable-active-high; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; }; &ehci2 { @@ -104,8 +116,30 @@ allwinner,drive = ; allwinner,pull = ; }; + + gmac_power_pin_orangepi: gmac_power_pin@0 { + allwinner,pins = "PD6"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; }; &usbphy { usb3_vbus-supply = <®_usb3_vbus>; }; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy = <&phy1>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <0>; + }; +}; diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi index 84e52b9cdb..6babaf3717 100644 --- a/arch/arm/dts/sun8i-h3.dtsi +++ b/arch/arm/dts/sun8i-h3.dtsi @@ -42,14 +42,16 @@ #include "skeleton.dtsi" +#include #include #include +#include / { interrupt-parent = <&gic>; aliases { - ethernet0 = <&emac>; + ethernet0 = &emac; }; cpus { @@ -108,191 +110,6 @@ clock-output-names = "osc32k"; }; - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - /* dummy clock until actually implemented */ - pll5: pll5_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - clock-output-names = "pll5"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; - }; - - pll6d2: pll6d2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll6 0>; - clock-output-names = "pll6d2"; - }; - - /* dummy clock until pll6 can be reused */ - pll8: pll8_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <1>; - clock-output-names = "pll8"; - }; - - cpu: cpu_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20050 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; - clock-output-names = "cpu"; - }; - - axi: axi_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb1: ahb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1"; - }; - - ahb2: ahb2_clk@01c2005c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-h3-ahb2-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&ahb1>, <&pll6d2>; - clock-output-names = "ahb2"; - }; - - apb1: apb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; - clock-output-names = "apb1"; - }; - - apb2: apb2_clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; - clock-output-names = "apb2"; - }; - - bus_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-h3-bus-gates-clk"; - reg = <0x01c20060 0x14>; - clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; - clock-names = "ahb1", "ahb2", "apb1", "apb2"; - clock-indices = <5>, <6>, <8>, - <9>, <10>, <13>, - <14>, <17>, <18>, - <19>, <20>, - <21>, <23>, - <24>, <25>, - <26>, <27>, - <28>, <29>, - <30>, <31>, <32>, - <35>, <36>, <37>, - <40>, <41>, <43>, - <44>, <52>, <53>, - <54>, <64>, - <65>, <69>, <72>, - <76>, <77>, <78>, - <96>, <97>, <98>, - <112>, <113>, - <114>, <115>, - <116>, <128>, <135>; - clock-output-names = "bus_ce", "bus_dma", "bus_mmc0", - "bus_mmc1", "bus_mmc2", "bus_nand", - "bus_sdram", "bus_gmac", "bus_ts", - "bus_hstimer", "bus_spi0", - "bus_spi1", "bus_otg", - "bus_otg_ehci0", "bus_ehci1", - "bus_ehci2", "bus_ehci3", - "bus_otg_ohci0", "bus_ohci1", - "bus_ohci2", "bus_ohci3", "bus_ve", - "bus_lcd0", "bus_lcd1", "bus_deint", - "bus_csi", "bus_tve", "bus_hdmi", - "bus_de", "bus_gpu", "bus_msgbox", - "bus_spinlock", "bus_codec", - "bus_spdif", "bus_pio", "bus_ths", - "bus_i2s0", "bus_i2s1", "bus_i2s2", - "bus_i2c0", "bus_i2c1", "bus_i2c2", - "bus_uart0", "bus_uart1", - "bus_uart2", "bus_uart3", - "bus_scr", "bus_ephy", "bus_dbg"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun8i-h3-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&osc24M>; - clock-output-names = "usb_phy0", "usb_phy1", - "usb_phy2", "usb_phy3", - "usb_ohci0", "usb_ohci1", - "usb_ohci2", "usb_ohci3"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5>; - clock-output-names = "mbus"; - }; - apb0: apb0_clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -327,27 +144,33 @@ #size-cells = <1>; ranges; + syscon: syscon@01c00000 { + compatible = "allwinner,sun8i-h3-syscon","syscon"; + reg = <0x01c00000 0x34>; + }; + dma: dma-controller@01c02000 { compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; interrupts = ; - clocks = <&bus_gates 6>; - resets = <&ahb_rst 6>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&bus_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 8>; + resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = ; status = "disabled"; @@ -356,17 +179,18 @@ }; mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&bus_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 9>; + resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = ; status = "disabled"; @@ -375,17 +199,18 @@ }; mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; + compatible = "allwinner,sun7i-a20-mmc", + "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&bus_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 10>; + resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = ; status = "disabled"; @@ -405,18 +230,18 @@ "pmu1", "pmu2", "pmu3"; - clocks = <&usb_clk 8>, - <&usb_clk 9>, - <&usb_clk 10>, - <&usb_clk 11>; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>, + <&ccu CLK_USB_PHY3>; clock-names = "usb0_phy", "usb1_phy", "usb2_phy", "usb3_phy"; - resets = <&usb_clk 0>, - <&usb_clk 1>, - <&usb_clk 2>, - <&usb_clk 3>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>, + <&ccu RST_USB_PHY3>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset", @@ -429,8 +254,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = ; - clocks = <&bus_gates 25>, <&bus_gates 29>; - resets = <&ahb_rst 25>, <&ahb_rst 29>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -440,9 +265,9 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; interrupts = ; - clocks = <&bus_gates 29>, <&bus_gates 25>, - <&usb_clk 17>; - resets = <&ahb_rst 29>, <&ahb_rst 25>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -452,8 +277,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = ; - clocks = <&bus_gates 26>, <&bus_gates 30>; - resets = <&ahb_rst 26>, <&ahb_rst 30>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; @@ -463,9 +288,9 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = ; - clocks = <&bus_gates 30>, <&bus_gates 26>, - <&usb_clk 18>; - resets = <&ahb_rst 30>, <&ahb_rst 26>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, + <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; @@ -475,8 +300,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1d000 0x100>; interrupts = ; - clocks = <&bus_gates 27>, <&bus_gates 31>; - resets = <&ahb_rst 27>, <&ahb_rst 31>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; phy-names = "usb"; status = "disabled"; @@ -486,43 +311,45 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1d400 0x100>; interrupts = ; - clocks = <&bus_gates 31>, <&bus_gates 27>, - <&usb_clk 19>; - resets = <&ahb_rst 31>, <&ahb_rst 27>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; phy-names = "usb"; status = "disabled"; }; + ccu: clock@01c20000 { + compatible = "allwinner,sun8i-h3-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + pio: pinctrl@01c20800 { compatible = "allwinner,sun8i-h3-pinctrl"; reg = <0x01c20800 0x400>; interrupts = , ; - clocks = <&bus_gates 69>; + clocks = <&ccu CLK_BUS_PIO>; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; - rgmii_pins: rgmii_pins { + emac_rgmii_pins: emac0@0 { allwinner,pins = "PD0", "PD1", "PD2", "PD3", - "PD4", "PD5", "PD7", - "PD8", "PD9", "PD10", - "PD12", "PD13", "PD15", - "PD16", "PD17"; + "PD4", "PD5", "PD7", + "PD8", "PD9", "PD10", + "PD12", "PD13", "PD15", + "PD16", "PD17"; allwinner,function = "emac"; allwinner,drive = ; allwinner,pull = ; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PA4", "PA5"; - allwinner,function = "uart0"; - allwinner,drive = ; - allwinner,pull = ; - }; - mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -555,24 +382,20 @@ allwinner,drive = ; allwinner,pull = ; }; - }; - ahb_rst: reset@01c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-ahb1-reset"; - reg = <0x01c202c0 0xc>; - }; - - apb1_rst: reset@01c202d0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d0 0x4>; - }; + uart0_pins_a: uart0@0 { + allwinner,pins = "PA4", "PA5"; + allwinner,function = "uart0"; + allwinner,drive = ; + allwinner,pull = ; + }; - apb2_rst: reset@01c202d8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d8 0x4>; + uart1_pins_a: uart1@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart1"; + allwinner,drive = ; + allwinner,pull = ; + }; }; timer@01c20c00 { @@ -595,8 +418,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 112>; - resets = <&apb2_rst 16>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; dma-names = "rx", "tx"; status = "disabled"; @@ -608,8 +431,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 113>; - resets = <&apb2_rst 17>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; dma-names = "rx", "tx"; status = "disabled"; @@ -621,8 +444,8 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 114>; - resets = <&apb2_rst 18>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; dma-names = "rx", "tx"; status = "disabled"; @@ -634,21 +457,22 @@ interrupts = ; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 115>; - resets = <&apb2_rst 19>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; dma-names = "rx", "tx"; status = "disabled"; }; - emac: ethernet@01c30000 { + emac: ethernet@1c30000 { compatible = "allwinner,sun8i-h3-emac"; - reg = <0x01c30000 0x2000>, <0x01c00030 0x4>; - reg-names = "emac", "syscon"; + syscon = <&syscon>; + reg = <0x01c30000 0x104>; + reg-names = "emac"; interrupts = ; - resets = <&ahb_rst 17>, <&ahb_rst 66>; + resets = <&ccu RST_BUS_EMAC>, <&ccu RST_BUS_EPHY>; reset-names = "ahb", "ephy"; - clocks = <&bus_gates 17>, <&bus_gates 128>; + clocks = <&ccu CLK_BUS_EMAC>, <&ccu CLK_BUS_EPHY>; clock-names = "ahb", "ephy"; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/sun8i-q8-common.dtsi b/arch/arm/dts/sun8i-q8-common.dtsi index 346a49d805..8e2cc30ec8 100644 --- a/arch/arm/dts/sun8i-q8-common.dtsi +++ b/arch/arm/dts/sun8i-q8-common.dtsi @@ -39,140 +39,83 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ -#include "sunxi-q8-common.dtsi" - -#include +#include "sunxi-reference-design-tablet.dtsi" +#include "sun8i-reference-design-tablet.dtsi" / { aliases { serial0 = &r_uart; + /* Make u-boot set mac-address for wifi without an eeprom */ + ethernet0 = &sdio_wifi; }; - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_q8>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + q8_hardwaremgr { + compatible = "allwinner,sunxi-q8-hardwaremgr"; + touchscreen-i2c-bus = <&i2c0>; + touchscreen-supply = <®_ldo_io1>; + touchscreen-power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ }; - chosen { - stdout-path = "serial0:115200n8"; + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + /* + * Q8 boards use various PL# pins as wifi-en. On other boards + * these may be connected to a wifi module output pin. To avoid + * short-circuits we configure these as inputs with pull-ups via + * pinctrl, instead of listing them as active-low reset-gpios. + */ + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pwrseq_pin_q8>; + /* The esp8089 needs 200 ms after driving wifi-en high */ + post-power-on-delay-ms = <200>; }; }; -&mmc0 { +&ehci0 { + status = "okay"; +}; + +&mmc1 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; - vmmc-supply = <®_dcdc1>; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_dldo1>; + mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; + non-removable; status = "okay"; -}; -&pio { - bl_en_pin_q8: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; + sdio_wifi: sdio_wifi@1 { + reg = <1>; }; +}; - mmc0_cd_pin_q8: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; +&mmc1_pins_a { + allwinner,pull = ; +}; + +&r_pio { + wifi_pwrseq_pin_q8: wifi_pwrseq_pin@0 { + allwinner,pins = "PL6", "PL7", "PL11"; allwinner,function = "gpio_in"; allwinner,drive = ; allwinner,pull = ; }; }; -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - }; +&usbphy { + usb1_vbus-supply = <®_dldo1>; }; -#include "axp22x.dtsi" - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; +&gsl1680 { + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; + touchscreen-fw-name = "silead/gsl1680-q8-700.fw"; + status = "okay"; }; -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; +®_ldo_io1 { + regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; + regulator-name = "vcc-touchscreen"; status = "okay"; }; - -&simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; -}; diff --git a/arch/arm/dts/sun8i-r16-parrot.dts b/arch/arm/dts/sun8i-r16-parrot.dts index 39c40be5f0..47553e5229 100644 --- a/arch/arm/dts/sun8i-r16-parrot.dts +++ b/arch/arm/dts/sun8i-r16-parrot.dts @@ -93,7 +93,10 @@ pinctrl-0 = <&i2c1_pins_a>; status = "okay"; - /* FIXME: An as-yet-unknown accelerometer is connected to this i2c bus. */ + /* + * FIXME: An as-yet-unknown accelerometer is connected to this + * i2c bus. + */ }; &lradc { diff --git a/arch/arm/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/dts/sun8i-reference-design-tablet.dtsi new file mode 100644 index 0000000000..f29897c40a --- /dev/null +++ b/arch/arm/dts/sun8i-reference-design-tablet.dtsi @@ -0,0 +1,244 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-reference-design-tablet.dtsi" + +#include + +/ { + aliases { + serial0 = &r_uart; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + /* + * The gsl1680 is rated at 400KHz and it will not work reliable at + * 100KHz, this has been confirmed on multiple different q8 tablets. + * The gsl1680 is the only device on this bus. + */ + clock-frequency = <400000>; + + gsl1680: touchscreen@40 { + compatible = "silead,gsl1680"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_power_pin>; + power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + /* Most tablets use this touchscreen, but not all */ + status = "disabled"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + bl_en_pin: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + ts_power_pin: ts_power_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH8"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + drivevbus-supply = <®_vcc5v0>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + status = "okay"; +}; diff --git a/arch/arm/dts/sun9i-a80-cubieboard4.dts b/arch/arm/dts/sun9i-a80-cubieboard4.dts index eb2ccd0a3b..1526b41c70 100644 --- a/arch/arm/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/dts/sun9i-a80-cubieboard4.dts @@ -45,7 +45,6 @@ /dts-v1/; #include "sun9i-a80.dtsi" -#include "sunxi-common-regulators.dtsi" #include #include @@ -79,26 +78,10 @@ }; }; -&pio { - led_pins_cubieboard4: led-pins@0 { - allwinner,pins = "PH6", "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = ; - allwinner,pull = ; - }; - - mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ cd-inverted; @@ -108,7 +91,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -120,14 +103,157 @@ allwinner,drive = ; }; +&pio { + led_pins_cubieboard4: led-pins@0 { + allwinner,pins = "PH6", "PH17"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { + allwinner,pins = "PH18"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + &r_ir { status = "okay"; }; &r_rsb { status = "okay"; + + axp809: pmic@3a3 { + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_aldo1: aldo1 { + /* + * TODO: This should be handled by the + * USB PHY driver. + */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc33-usbh"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pb-io-cam"; + }; + + aldo3 { + /* unused */ + }; + + reg_dc5ldo: dc5ldo { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus-09-usbh"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; + }; + + reg_dcdc2: dcdc2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; + }; + + reg_dcdc4: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-usb0-hdmi"; + }; + + reg_dcdc5: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1425000>; + regulator-max-microvolt = <1575000>; + regulator-name = "vcc-dram"; + }; + + reg_dldo1: dldo1 { + /* + * The WiFi chip supports a wide range + * (3.0 ~ 4.8V) of voltages, and so does + * this regulator (3.0 ~ 4.2V), but + * Allwinner SDK always sets it to 3.3V. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_dldo2: dldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pl"; + }; + + reg_eldo1: eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dvdd-cam"; + }; + + reg_eldo2: eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_eldo3: eldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pm-codec-io1"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pg"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa-gmac-2v5"; + }; + + reg_rtc_ldo: rtc_ldo { + regulator-name = "vcc-rtc-vdd1v8-io"; + }; + }; + }; }; +#include "axp809.dtsi" + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts index d7a20d92b1..7fd22e8886 100644 --- a/arch/arm/dts/sun9i-a80-optimus.dts +++ b/arch/arm/dts/sun9i-a80-optimus.dts @@ -44,7 +44,6 @@ /dts-v1/; #include "sun9i-a80.dtsi" -#include "sunxi-common-regulators.dtsi" #include #include @@ -85,6 +84,17 @@ }; }; + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_optimus>; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -109,6 +119,31 @@ status = "okay"; }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = ; +}; + &ohci0 { status = "okay"; }; @@ -147,37 +182,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ - cd-inverted; - status = "okay"; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v0>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&mmc2_8bit_pins { - /* Increase drive strength for DDR modes */ - allwinner,drive = ; -}; - -®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_optimus>; - gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - status = "okay"; -}; - &r_ir { status = "okay"; }; @@ -193,8 +197,135 @@ &r_rsb { status = "okay"; + + axp809: pmic@3a3 { + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_aldo1: aldo1 { + /* + * TODO: This should be handled by the + * USB PHY driver. + */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc33-usbh"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pb-io-cam"; + }; + + aldo3 { + /* unused */ + }; + + reg_dc5ldo: dc5ldo { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus-09-usbh"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; + }; + + reg_dcdc2: dcdc2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; + }; + + reg_dcdc4: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-usb0-hdmi"; + }; + + reg_dcdc5: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1425000>; + regulator-max-microvolt = <1575000>; + regulator-name = "vcc-dram"; + }; + + reg_dldo1: dldo1 { + /* + * The WiFi chip supports a wide range + * (3.0 ~ 4.8V) of voltages, and so does + * this regulator (3.0 ~ 4.2V), but + * Allwinner SDK always sets it to 3.3V. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_dldo2: dldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pl"; + }; + + reg_eldo1: eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dvdd-cam"; + }; + + reg_eldo2: eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_eldo3: eldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pm-codec-io1"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pg"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa-gmac-2v5"; + }; + + reg_rtc_ldo: rtc_ldo { + regulator-name = "vcc-rtc-vdd1v8-io"; + }; + }; + }; }; +#include "axp809.dtsi" + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/dts/sunxi-reference-design-tablet.dtsi new file mode 100644 index 0000000000..b8241462fc --- /dev/null +++ b/arch/arm/dts/sunxi-reference-design-tablet.dtsi @@ -0,0 +1,83 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include +#include "sunxi-common-regulators.dtsi" + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + status = "okay"; +}; diff --git a/configs/MSI_Primo81_defconfig b/configs/MSI_Primo81_defconfig index 3d71bf50a7..8847271862 100644 --- a/configs/MSI_Primo81_defconfig +++ b/configs/MSI_Primo81_defconfig @@ -17,6 +17,7 @@ CONFIG_SPL=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_AXP_DLDO1_VOLT=3300 +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set CONFIG_USB_MUSB_HOST=y CONFIG_VIDEO_LCD_SSD2828_TX_CLK=27 CONFIG_VIDEO_LCD_SSD2828_RESET="PA26" diff --git a/include/dt-bindings/clock/sun8i-h3-ccu.h b/include/dt-bindings/clock/sun8i-h3-ccu.h new file mode 100644 index 0000000000..efb7ba2bd5 --- /dev/null +++ b/include/dt-bindings/clock/sun8i-h3-ccu.h @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2016 Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_CLK_SUN8I_H3_H_ +#define _DT_BINDINGS_CLK_SUN8I_H3_H_ + +#define CLK_CPUX 14 + +#define CLK_BUS_CE 20 +#define CLK_BUS_DMA 21 +#define CLK_BUS_MMC0 22 +#define CLK_BUS_MMC1 23 +#define CLK_BUS_MMC2 24 +#define CLK_BUS_NAND 25 +#define CLK_BUS_DRAM 26 +#define CLK_BUS_EMAC 27 +#define CLK_BUS_TS 28 +#define CLK_BUS_HSTIMER 29 +#define CLK_BUS_SPI0 30 +#define CLK_BUS_SPI1 31 +#define CLK_BUS_OTG 32 +#define CLK_BUS_EHCI0 33 +#define CLK_BUS_EHCI1 34 +#define CLK_BUS_EHCI2 35 +#define CLK_BUS_EHCI3 36 +#define CLK_BUS_OHCI0 37 +#define CLK_BUS_OHCI1 38 +#define CLK_BUS_OHCI2 39 +#define CLK_BUS_OHCI3 40 +#define CLK_BUS_VE 41 +#define CLK_BUS_TCON0 42 +#define CLK_BUS_TCON1 43 +#define CLK_BUS_DEINTERLACE 44 +#define CLK_BUS_CSI 45 +#define CLK_BUS_TVE 46 +#define CLK_BUS_HDMI 47 +#define CLK_BUS_DE 48 +#define CLK_BUS_GPU 49 +#define CLK_BUS_MSGBOX 50 +#define CLK_BUS_SPINLOCK 51 +#define CLK_BUS_CODEC 52 +#define CLK_BUS_SPDIF 53 +#define CLK_BUS_PIO 54 +#define CLK_BUS_THS 55 +#define CLK_BUS_I2S0 56 +#define CLK_BUS_I2S1 57 +#define CLK_BUS_I2S2 58 +#define CLK_BUS_I2C0 59 +#define CLK_BUS_I2C1 60 +#define CLK_BUS_I2C2 61 +#define CLK_BUS_UART0 62 +#define CLK_BUS_UART1 63 +#define CLK_BUS_UART2 64 +#define CLK_BUS_UART3 65 +#define CLK_BUS_SCR 66 +#define CLK_BUS_EPHY 67 +#define CLK_BUS_DBG 68 + +#define CLK_THS 69 +#define CLK_NAND 70 +#define CLK_MMC0 71 +#define CLK_MMC0_SAMPLE 72 +#define CLK_MMC0_OUTPUT 73 +#define CLK_MMC1 74 +#define CLK_MMC1_SAMPLE 75 +#define CLK_MMC1_OUTPUT 76 +#define CLK_MMC2 77 +#define CLK_MMC2_SAMPLE 78 +#define CLK_MMC2_OUTPUT 79 +#define CLK_TS 80 +#define CLK_CE 81 +#define CLK_SPI0 82 +#define CLK_SPI1 83 +#define CLK_I2S0 84 +#define CLK_I2S1 85 +#define CLK_I2S2 86 +#define CLK_SPDIF 87 +#define CLK_USB_PHY0 88 +#define CLK_USB_PHY1 89 +#define CLK_USB_PHY2 90 +#define CLK_USB_PHY3 91 +#define CLK_USB_OHCI0 92 +#define CLK_USB_OHCI1 93 +#define CLK_USB_OHCI2 94 +#define CLK_USB_OHCI3 95 + +#define CLK_DRAM_VE 97 +#define CLK_DRAM_CSI 98 +#define CLK_DRAM_DEINTERLACE 99 +#define CLK_DRAM_TS 100 +#define CLK_DE 101 +#define CLK_TCON0 102 +#define CLK_TVE 103 +#define CLK_DEINTERLACE 104 +#define CLK_CSI_MISC 105 +#define CLK_CSI_SCLK 106 +#define CLK_CSI_MCLK 107 +#define CLK_VE 108 +#define CLK_AC_DIG 109 +#define CLK_AVS 110 +#define CLK_HDMI 111 +#define CLK_HDMI_DDC 112 + +#define CLK_GPU 114 + +#endif /* _DT_BINDINGS_CLK_SUN8I_H3_H_ */ diff --git a/include/dt-bindings/reset/sun8i-h3-ccu.h b/include/dt-bindings/reset/sun8i-h3-ccu.h new file mode 100644 index 0000000000..6b7af80c26 --- /dev/null +++ b/include/dt-bindings/reset/sun8i-h3-ccu.h @@ -0,0 +1,103 @@ +/* + * Copyright (C) 2016 Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DT_BINDINGS_RST_SUN8I_H3_H_ +#define _DT_BINDINGS_RST_SUN8I_H3_H_ + +#define RST_USB_PHY0 0 +#define RST_USB_PHY1 1 +#define RST_USB_PHY2 2 +#define RST_USB_PHY3 3 + +#define RST_MBUS 4 + +#define RST_BUS_CE 5 +#define RST_BUS_DMA 6 +#define RST_BUS_MMC0 7 +#define RST_BUS_MMC1 8 +#define RST_BUS_MMC2 9 +#define RST_BUS_NAND 10 +#define RST_BUS_DRAM 11 +#define RST_BUS_EMAC 12 +#define RST_BUS_TS 13 +#define RST_BUS_HSTIMER 14 +#define RST_BUS_SPI0 15 +#define RST_BUS_SPI1 16 +#define RST_BUS_OTG 17 +#define RST_BUS_EHCI0 18 +#define RST_BUS_EHCI1 19 +#define RST_BUS_EHCI2 20 +#define RST_BUS_EHCI3 21 +#define RST_BUS_OHCI0 22 +#define RST_BUS_OHCI1 23 +#define RST_BUS_OHCI2 24 +#define RST_BUS_OHCI3 25 +#define RST_BUS_VE 26 +#define RST_BUS_TCON0 27 +#define RST_BUS_TCON1 28 +#define RST_BUS_DEINTERLACE 29 +#define RST_BUS_CSI 30 +#define RST_BUS_TVE 31 +#define RST_BUS_HDMI0 32 +#define RST_BUS_HDMI1 33 +#define RST_BUS_DE 34 +#define RST_BUS_GPU 35 +#define RST_BUS_MSGBOX 36 +#define RST_BUS_SPINLOCK 37 +#define RST_BUS_DBG 38 +#define RST_BUS_EPHY 39 +#define RST_BUS_CODEC 40 +#define RST_BUS_SPDIF 41 +#define RST_BUS_THS 42 +#define RST_BUS_I2S0 43 +#define RST_BUS_I2S1 44 +#define RST_BUS_I2S2 45 +#define RST_BUS_I2C0 46 +#define RST_BUS_I2C1 47 +#define RST_BUS_I2C2 48 +#define RST_BUS_UART0 49 +#define RST_BUS_UART1 50 +#define RST_BUS_UART2 51 +#define RST_BUS_UART3 52 +#define RST_BUS_SCR 53 + +#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */