From: Wolfgang Denk Date: Fri, 4 Nov 2011 15:55:56 +0000 (+0000) Subject: mpc8260/i2c.c: CodingStyle cleanup X-Git-Tag: v2011.12-rc1~257 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=86ba9255342c7b298227f19adc50077195d986b6;p=u-boot mpc8260/i2c.c: CodingStyle cleanup Make (mostly) checkpatch clean (don't convert to use I/O accessors yet, so there will be "Use of volatile is usually wrong" warnings left. Also accept some other harmless checkpatch warnings. Signed-off-by: Wolfgang Denk Cc: Heiko Schocher --- diff --git a/arch/powerpc/cpu/mpc8260/i2c.c b/arch/powerpc/cpu/mpc8260/i2c.c index d2bdcc2d82..4c99ee71ae 100644 --- a/arch/powerpc/cpu/mpc8260/i2c.c +++ b/arch/powerpc/cpu/mpc8260/i2c.c @@ -37,7 +37,7 @@ DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_I2C_MULTI_BUS) -static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0; +static unsigned int i2c_bus_num __attribute__ ((section(".data"))) = 0; #endif /* CONFIG_I2C_MULTI_BUS */ /* uSec to wait between polls of the i2c */ @@ -51,52 +51,50 @@ static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0; */ #define TOUT_LOOP 5 -/*----------------------------------------------------------------------- +/* * Set default values */ #ifndef CONFIG_SYS_I2C_SPEED #define CONFIG_SYS_I2C_SPEED 50000 #endif -/*----------------------------------------------------------------------- - */ -typedef void (*i2c_ecb_t)(int, int, void *); /* error callback function */ +typedef void (*i2c_ecb_t) (int, int, void *); /* error callback function */ /* This structure keeps track of the bd and buffer space usage. */ typedef struct i2c_state { - int rx_idx; /* index to next free Rx BD */ - int tx_idx; /* index to next free Tx BD */ - void *rxbd; /* pointer to next free Rx BD */ - void *txbd; /* pointer to next free Tx BD */ - int tx_space; /* number of Tx bytes left */ - unsigned char *tx_buf; /* pointer to free Tx area */ - i2c_ecb_t err_cb; /* error callback function */ - void *cb_data; /* private data to be passed */ + int rx_idx; /* index to next free Rx BD */ + int tx_idx; /* index to next free Tx BD */ + void *rxbd; /* pointer to next free Rx BD */ + void *txbd; /* pointer to next free Tx BD */ + int tx_space; /* number of Tx bytes left */ + unsigned char *tx_buf; /* pointer to free Tx area */ + i2c_ecb_t err_cb; /* error callback function */ + void *cb_data; /* private data to be passed */ } i2c_state_t; /* flags for i2c_send() and i2c_receive() */ -#define I2CF_ENABLE_SECONDARY 0x01 /* secondary_address is valid */ -#define I2CF_START_COND 0x02 /* tx: generate start condition */ -#define I2CF_STOP_COND 0x04 /* tx: generate stop condition */ +#define I2CF_ENABLE_SECONDARY 0x01 /* secondary_address is valid */ +#define I2CF_START_COND 0x02 /* tx: generate start condition */ +#define I2CF_STOP_COND 0x04 /* tx: generate stop condition */ /* return codes */ -#define I2CERR_NO_BUFFERS 1 /* no more BDs or buffer space */ -#define I2CERR_MSG_TOO_LONG 2 /* tried to send/receive to much data */ -#define I2CERR_TIMEOUT 3 /* timeout in i2c_doio() */ -#define I2CERR_QUEUE_EMPTY 4 /* i2c_doio called without send/receive */ -#define I2CERR_IO_ERROR 5 /* had an error during comms */ +#define I2CERR_NO_BUFFERS 1 /* no more BDs or buffer space */ +#define I2CERR_MSG_TOO_LONG 2 /* tried to send/receive to much data */ +#define I2CERR_TIMEOUT 3 /* timeout in i2c_doio() */ +#define I2CERR_QUEUE_EMPTY 4 /* i2c_doio called without send/rcv */ +#define I2CERR_IO_ERROR 5 /* had an error during comms */ /* error callback flags */ -#define I2CECB_RX_ERR 0x10 /* this is a receive error */ -#define I2CECB_RX_OV 0x02 /* receive overrun error */ -#define I2CECB_RX_MASK 0x0f /* mask for error bits */ -#define I2CECB_TX_ERR 0x20 /* this is a transmit error */ -#define I2CECB_TX_CL 0x01 /* transmit collision error */ -#define I2CECB_TX_UN 0x02 /* transmit underflow error */ -#define I2CECB_TX_NAK 0x04 /* transmit no ack error */ -#define I2CECB_TX_MASK 0x0f /* mask for error bits */ -#define I2CECB_TIMEOUT 0x40 /* this is a timeout error */ +#define I2CECB_RX_ERR 0x10 /* this is a receive error */ +#define I2CECB_RX_OV 0x02 /* receive overrun error */ +#define I2CECB_RX_MASK 0x0f /* mask for error bits */ +#define I2CECB_TX_ERR 0x20 /* this is a transmit error */ +#define I2CECB_TX_CL 0x01 /* transmit collision error */ +#define I2CECB_TX_UN 0x02 /* transmit underflow error */ +#define I2CECB_TX_NAK 0x04 /* transmit no ack error */ +#define I2CECB_TX_MASK 0x0f /* mask for error bits */ +#define I2CECB_TIMEOUT 0x40 /* this is a timeout error */ #define ERROR_I2C_NONE 0 #define ERROR_I2C_LENGTH 1 @@ -111,13 +109,13 @@ typedef struct i2c_state { #define NUM_TX_BDS 4 #define MAX_TX_SPACE 256 -typedef struct I2C_BD -{ - unsigned short status; - unsigned short length; - unsigned char *addr; +typedef struct I2C_BD { + unsigned short status; + unsigned short length; + unsigned char *addr; } I2C_BD; -#define BD_I2C_TX_START 0x0400 /* special status for i2c: Start condition */ + +#define BD_I2C_TX_START 0x0400 /* special status for i2c: Start condition */ #define BD_I2C_TX_CL 0x0001 /* collision error */ #define BD_I2C_TX_UN 0x0002 /* underflow error */ @@ -140,32 +138,32 @@ typedef struct I2C_BD */ static inline int i2c_roundrate(int hz, int speed, int filter, int modval, - int *brgval, int *totspeed) + int *brgval, int *totspeed) { - int moddiv = 1 << (5-(modval & 3)), brgdiv, div; + int moddiv = 1 << (5 - (modval & 3)), brgdiv, div; - PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n", - hz, speed, filter, modval)); + PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n", + hz, speed, filter, modval)); - div = moddiv * speed; - brgdiv = (hz + div - 1) / div; + div = moddiv * speed; + brgdiv = (hz + div - 1) / div; - PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv)); + PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv)); - *brgval = ((brgdiv + 1) / 2) - 3 - (2*filter); + *brgval = ((brgdiv + 1) / 2) - 3 - (2 * filter); - if ((*brgval < 0) || (*brgval > 255)) { - PRINTD(("\t\trejected brgval=%d\n", *brgval)); - return -1; - } + if ((*brgval < 0) || (*brgval > 255)) { + PRINTD(("\t\trejected brgval=%d\n", *brgval)); + return -1; + } - brgdiv = 2 * (*brgval + 3 + (2 * filter)); - div = moddiv * brgdiv ; - *totspeed = hz / div; + brgdiv = 2 * (*brgval + 3 + (2 * filter)); + div = moddiv * brgdiv; + *totspeed = hz / div; - PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed)); + PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed)); - return 0; + return 0; } /* @@ -173,84 +171,87 @@ i2c_roundrate(int hz, int speed, int filter, int modval, */ static int i2c_setrate(int hz, int speed) { - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; - volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; - int brgval, - modval, /* 0-3 */ - bestspeed_diff = speed, - bestspeed_brgval=0, - bestspeed_modval=0, - bestspeed_filter=0, - totspeed, - filter = 0; /* Use this fixed value */ - - for (modval = 0; modval < 4; modval++) - { - if (i2c_roundrate (hz, speed, filter, modval, &brgval, &totspeed) == 0) - { - int diff = speed - totspeed ; - - if ((diff >= 0) && (diff < bestspeed_diff)) - { - bestspeed_diff = diff ; - bestspeed_modval = modval; - bestspeed_brgval = brgval; - bestspeed_filter = filter; + immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; + volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; + int brgval, + modval, /* 0-3 */ + bestspeed_diff = speed, + bestspeed_brgval = 0, + bestspeed_modval = 0, + bestspeed_filter = 0, + totspeed, + filter = 0; /* Use this fixed value */ + + for (modval = 0; modval < 4; modval++) { + if (i2c_roundrate(hz, speed, filter, modval, &brgval, &totspeed) + == 0) { + int diff = speed - totspeed; + + if ((diff >= 0) && (diff < bestspeed_diff)) { + bestspeed_diff = diff; + bestspeed_modval = modval; + bestspeed_brgval = brgval; + bestspeed_filter = filter; } } } - PRINTD(("[I2C] Best is:\n")); - PRINTD(("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n", - hz, speed, - bestspeed_filter, bestspeed_modval, bestspeed_brgval, - bestspeed_diff)); + PRINTD(("[I2C] Best is:\n")); + PRINTD(("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n", + hz, speed, bestspeed_filter, bestspeed_modval, bestspeed_brgval, + bestspeed_diff)); - i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3); - i2c->i2c_i2brg = bestspeed_brgval & 0xff; + i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | + (bestspeed_filter << 3); + i2c->i2c_i2brg = bestspeed_brgval & 0xff; - PRINTD(("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod, i2c->i2c_i2brg)); + PRINTD(("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod, + i2c->i2c_i2brg)); - return 1 ; + return 1; } void i2c_init(int speed, int slaveadd) { - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile cpm8260_t *cp = (cpm8260_t *)&immap->im_cpm; - volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; + volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; volatile iic_t *iip; ulong rbase, tbase; volatile I2C_BD *rxbd, *txbd; uint dpaddr; #ifdef CONFIG_SYS_I2C_INIT_BOARD - /* call board specific i2c bus reset routine before accessing the */ - /* environment, which might be in a chip on that bus. For details */ - /* about this problem see doc/I2C_Edge_Conditions. */ + /* + * call board specific i2c bus reset routine before accessing the + * environment, which might be in a chip on that bus. For details + * about this problem see doc/I2C_Edge_Conditions. + */ i2c_init_board(); #endif - dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE])); + dpaddr = *((unsigned short *) (&immap->im_dprambase[PROFF_I2C_BASE])); if (dpaddr == 0) { - /* need to allocate dual port ram */ - dpaddr = m8260_cpm_dpalloc(64 + - (NUM_RX_BDS * sizeof(I2C_BD)) + (NUM_TX_BDS * sizeof(I2C_BD)) + - MAX_TX_SPACE, 64); - *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE])) = dpaddr; + /* need to allocate dual port ram */ + dpaddr = m8260_cpm_dpalloc(64 + + (NUM_RX_BDS * sizeof(I2C_BD)) + + (NUM_TX_BDS * sizeof(I2C_BD)) + + MAX_TX_SPACE, 64); + *((unsigned short *)(&immap->im_dprambase[PROFF_I2C_BASE])) = + dpaddr; } /* * initialise data in dual port ram: * - * dpaddr -> parameter ram (64 bytes) + * dpaddr -> parameter ram (64 bytes) * rbase -> rx BD (NUM_RX_BDS * sizeof(I2C_BD) bytes) * tbase -> tx BD (NUM_TX_BDS * sizeof(I2C_BD) bytes) * tx buffer (MAX_TX_SPACE bytes) */ iip = (iic_t *)&immap->im_dprambase[dpaddr]; - memset((void*)iip, 0, sizeof(iic_t)); + memset((void *)iip, 0, sizeof(iic_t)); rbase = dpaddr + 64; tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD); @@ -267,7 +268,7 @@ void i2c_init(int speed, int slaveadd) * divide BRGCLK by 1) */ PRINTD(("[I2C] Setting rate...\n")); - i2c_setrate (gd->brg_clk, CONFIG_SYS_I2C_SPEED) ; + i2c_setrate(gd->brg_clk, CONFIG_SYS_I2C_SPEED); /* Set I2C controller in master mode */ i2c->i2c_i2com = 0x01; @@ -275,13 +276,15 @@ void i2c_init(int speed, int slaveadd) /* Initialize Tx/Rx parameters */ iip->iic_rbase = rbase; iip->iic_tbase = tbase; - rxbd = (I2C_BD *)((unsigned char *)&immap->im_dprambase[iip->iic_rbase]); - txbd = (I2C_BD *)((unsigned char *)&immap->im_dprambase[iip->iic_tbase]); + rxbd = (I2C_BD *)((unsigned char *) &immap-> + im_dprambase[iip->iic_rbase]); + txbd = (I2C_BD *)((unsigned char *) &immap-> + im_dprambase[iip->iic_tbase]); PRINTD(("[I2C] rbase = %04x\n", iip->iic_rbase)); PRINTD(("[I2C] tbase = %04x\n", iip->iic_tbase)); - PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd)); - PRINTD(("[I2C] txbd = %08x\n", (int)txbd)); + PRINTD(("[I2C] rxbd = %08x\n", (int) rxbd)); + PRINTD(("[I2C] txbd = %08x\n", (int) txbd)); /* Set big endian byte order */ iip->iic_tfcr = 0x10; @@ -290,13 +293,12 @@ void i2c_init(int speed, int slaveadd) /* Set maximum receive size. */ iip->iic_mrblr = I2C_RXTX_LEN; - cp->cp_cpcr = mk_cr_cmd(CPM_CR_I2C_PAGE, - CPM_CR_I2C_SBLOCK, - 0x00, - CPM_CR_INIT_TRX) | CPM_CR_FLG; - do { - __asm__ __volatile__ ("eieio"); - } while (cp->cp_cpcr & CPM_CR_FLG); + cp->cp_cpcr = mk_cr_cmd(CPM_CR_I2C_PAGE, + CPM_CR_I2C_SBLOCK, + 0x00, CPM_CR_INIT_TRX) | CPM_CR_FLG; + do { + __asm__ __volatile__("eieio"); + } while (cp->cp_cpcr & CPM_CR_FLG); /* Clear events and interrupts */ i2c->i2c_i2cer = 0xff; @@ -306,20 +308,20 @@ void i2c_init(int speed, int slaveadd) static void i2c_newio(i2c_state_t *state) { - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile iic_t *iip; uint dpaddr; PRINTD(("[I2C] i2c_newio\n")); - dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE])); + dpaddr = *((unsigned short *)(&immap->im_dprambase[PROFF_I2C_BASE])); iip = (iic_t *)&immap->im_dprambase[dpaddr]; state->rx_idx = 0; state->tx_idx = 0; - state->rxbd = (void*)&immap->im_dprambase[iip->iic_rbase]; - state->txbd = (void*)&immap->im_dprambase[iip->iic_tbase]; + state->rxbd = (void *)&immap->im_dprambase[iip->iic_rbase]; + state->txbd = (void *)&immap->im_dprambase[iip->iic_tbase]; state->tx_space = MAX_TX_SPACE; - state->tx_buf = (uchar*)state->txbd + NUM_TX_BDS * sizeof(I2C_BD); + state->tx_buf = (uchar *)state->txbd + NUM_TX_BDS * sizeof(I2C_BD); state->err_cb = NULL; state->cb_data = NULL; @@ -328,125 +330,114 @@ void i2c_newio(i2c_state_t *state) PRINTD(("[I2C] tx_buf = %08x\n", (int)state->tx_buf)); /* clear the buffer memory */ - memset((char *)state->tx_buf, 0, MAX_TX_SPACE); + memset((char *) state->tx_buf, 0, MAX_TX_SPACE); } static int i2c_send(i2c_state_t *state, - unsigned char address, - unsigned char secondary_address, - unsigned int flags, - unsigned short size, - unsigned char *dataout) + unsigned char address, + unsigned char secondary_address, + unsigned int flags, unsigned short size, unsigned char *dataout) { volatile I2C_BD *txbd; - int i,j; + int i, j; PRINTD(("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n", - address, secondary_address, flags, size)); + address, secondary_address, flags, size)); /* trying to send message larger than BD */ if (size > I2C_RXTX_LEN) - return I2CERR_MSG_TOO_LONG; + return I2CERR_MSG_TOO_LONG; /* no more free bds */ if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size)) - return I2CERR_NO_BUFFERS; + return I2CERR_NO_BUFFERS; txbd = (I2C_BD *)state->txbd; txbd->addr = state->tx_buf; - PRINTD(("[I2C] txbd = %08x\n", (int)txbd)); - - if (flags & I2CF_START_COND) - { - PRINTD(("[I2C] Formatting addresses...\n")); - if (flags & I2CF_ENABLE_SECONDARY) - { - txbd->length = size + 2; /* Length of message plus dest addresses */ - txbd->addr[0] = address << 1; - txbd->addr[1] = secondary_address; - i = 2; - } - else - { - txbd->length = size + 1; /* Length of message plus dest address */ - txbd->addr[0] = address << 1; /* Write destination address to BD */ - i = 1; + PRINTD(("[I2C] txbd = %08x\n", (int) txbd)); + + if (flags & I2CF_START_COND) { + PRINTD(("[I2C] Formatting addresses...\n")); + if (flags & I2CF_ENABLE_SECONDARY) { + /* Length of message plus dest addresses */ + txbd->length = size + 2; + txbd->addr[0] = address << 1; + txbd->addr[1] = secondary_address; + i = 2; + } else { + /* Length of message plus dest address */ + txbd->length = size + 1; + /* Write destination address to BD */ + txbd->addr[0] = address << 1; + i = 1; + } + } else { + txbd->length = size; /* Length of message */ + i = 0; } - } - else - { - txbd->length = size; /* Length of message */ - i = 0; - } /* set up txbd */ txbd->status = BD_SC_READY; if (flags & I2CF_START_COND) - txbd->status |= BD_I2C_TX_START; + txbd->status |= BD_I2C_TX_START; if (flags & I2CF_STOP_COND) - txbd->status |= BD_SC_LAST | BD_SC_WRAP; + txbd->status |= BD_SC_LAST | BD_SC_WRAP; /* Copy data to send into buffer */ PRINTD(("[I2C] copy data...\n")); - for(j = 0; j < size; i++, j++) - txbd->addr[i] = dataout[j]; + for (j = 0; j < size; i++, j++) + txbd->addr[i] = dataout[j]; PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n", - txbd->length, - txbd->status, - txbd->addr[0], - txbd->addr[1])); + txbd->length, txbd->status, txbd->addr[0], txbd->addr[1])); /* advance state */ state->tx_buf += txbd->length; state->tx_space -= txbd->length; state->tx_idx++; - state->txbd = (void*)(txbd + 1); + state->txbd = (void *) (txbd + 1); return 0; } static int i2c_receive(i2c_state_t *state, - unsigned char address, - unsigned char secondary_address, - unsigned int flags, - unsigned short size_to_expect, - unsigned char *datain) + unsigned char address, + unsigned char secondary_address, + unsigned int flags, + unsigned short size_to_expect, unsigned char *datain) { volatile I2C_BD *rxbd, *txbd; - PRINTD(("[I2C] i2c_receive %02d %02d %02d\n", address, secondary_address, flags)); + PRINTD(("[I2C] i2c_receive %02d %02d %02d\n", address, + secondary_address, flags)); /* Expected to receive too much */ if (size_to_expect > I2C_RXTX_LEN) - return I2CERR_MSG_TOO_LONG; + return I2CERR_MSG_TOO_LONG; /* no more free bds */ if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS - || state->tx_space < 2) - return I2CERR_NO_BUFFERS; + || state->tx_space < 2) + return I2CERR_NO_BUFFERS; - rxbd = (I2C_BD *)state->rxbd; - txbd = (I2C_BD *)state->txbd; + rxbd = (I2C_BD *) state->rxbd; + txbd = (I2C_BD *) state->txbd; - PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd)); - PRINTD(("[I2C] txbd = %08x\n", (int)txbd)); + PRINTD(("[I2C] rxbd = %08x\n", (int) rxbd)); + PRINTD(("[I2C] txbd = %08x\n", (int) txbd)); txbd->addr = state->tx_buf; /* set up TXBD for destination address */ - if (flags & I2CF_ENABLE_SECONDARY) - { + if (flags & I2CF_ENABLE_SECONDARY) { txbd->length = 2; - txbd->addr[0] = address << 1; /* Write data */ - txbd->addr[1] = secondary_address; /* Internal address */ + txbd->addr[0] = address << 1; /* Write data */ + txbd->addr[1] = secondary_address; /* Internal address */ txbd->status = BD_SC_READY; - } - else - { + } else { txbd->length = 1 + size_to_expect; txbd->addr[0] = (address << 1) | 0x01; txbd->status = BD_SC_READY; @@ -459,30 +450,23 @@ int i2c_receive(i2c_state_t *state, rxbd->addr = datain; txbd->status |= BD_I2C_TX_START; - if (flags & I2CF_STOP_COND) - { + if (flags & I2CF_STOP_COND) { txbd->status |= BD_SC_LAST | BD_SC_WRAP; rxbd->status |= BD_SC_WRAP; } PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n", - txbd->length, - txbd->status, - txbd->addr[0], - txbd->addr[1])); + txbd->length, txbd->status, txbd->addr[0], txbd->addr[1])); PRINTD(("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n", - rxbd->length, - rxbd->status, - rxbd->addr[0], - rxbd->addr[1])); + rxbd->length, rxbd->status, rxbd->addr[0], rxbd->addr[1])); /* advance state */ state->tx_buf += txbd->length; state->tx_space -= txbd->length; state->tx_idx++; - state->txbd = (void*)(txbd + 1); + state->txbd = (void *) (txbd + 1); state->rx_idx++; - state->rxbd = (void*)(rxbd + 1); + state->rxbd = (void *) (rxbd + 1); return 0; } @@ -491,11 +475,11 @@ int i2c_receive(i2c_state_t *state, static int i2c_doio(i2c_state_t *state) { - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; + volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile iic_t *iip; - volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; + volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; volatile I2C_BD *txbd, *rxbd; - int n, i, b, rxcnt = 0, rxtimeo = 0, txcnt = 0, txtimeo = 0, rc = 0; + int n, i, b, rxcnt = 0, rxtimeo = 0, txcnt = 0, txtimeo = 0, rc = 0; uint dpaddr; PRINTD(("[I2C] i2c_doio\n")); @@ -505,7 +489,7 @@ int i2c_doio(i2c_state_t *state) return I2CERR_QUEUE_EMPTY; } - dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE])); + dpaddr = *((unsigned short *)(&immap->im_dprambase[PROFF_I2C_BASE])); iip = (iic_t *)&immap->im_dprambase[dpaddr]; iip->iic_rbptr = iip->iic_rbase; iip->iic_tbptr = iip->iic_tbase; @@ -519,90 +503,100 @@ int i2c_doio(i2c_state_t *state) /* Loop until transmit & receive completed */ - if ((n = state->tx_idx) > 0) { + n = state->tx_idx; + + if (n > 0) { - txbd = ((I2C_BD*)state->txbd) - n; + txbd = ((I2C_BD *) state->txbd) - n; for (i = 0; i < n; i++) { txtimeo += TOUT_LOOP * txbd->length; txbd++; } - txbd--; /* wait until last in list is done */ + txbd--; /* wait until last in list is done */ - PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd)); + PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", + (ulong) txbd)); udelay(START_DELAY_US); /* give it time to start */ - while((txbd->status & BD_SC_READY) && (++txcnt < txtimeo)) { + while ((txbd->status & BD_SC_READY) && (++txcnt < txtimeo)) { udelay(DELAY_US); if (ctrlc()) - return (-1); - __asm__ __volatile__ ("eieio"); + return -1; + __asm__ __volatile__("eieio"); } } - if (txcnt < txtimeo && (n = state->rx_idx) > 0) { + n = state->rx_idx; - rxbd = ((I2C_BD*)state->rxbd) - n; + if (txcnt < txtimeo && n > 0) { + + rxbd = ((I2C_BD *) state->rxbd) - n; for (i = 0; i < n; i++) { rxtimeo += TOUT_LOOP * rxbd->length; rxbd++; } - rxbd--; /* wait until last in list is done */ + rxbd--; /* wait until last in list is done */ - PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd)); + PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong) rxbd)); udelay(START_DELAY_US); /* give it time to start */ - while((rxbd->status & BD_SC_EMPTY) && (++rxcnt < rxtimeo)) { + while ((rxbd->status & BD_SC_EMPTY) && (++rxcnt < rxtimeo)) { udelay(DELAY_US); if (ctrlc()) - return (-1); - __asm__ __volatile__ ("eieio"); + return -1; + __asm__ __volatile__("eieio"); } } /* Turn off I2C */ i2c->i2c_i2mod &= ~0x01; - if ((n = state->tx_idx) > 0) { + n = state->tx_idx; + + if (n > 0) { for (i = 0; i < n; i++) { - txbd = ((I2C_BD*)state->txbd) - (n - i); - if ((b = txbd->status & BD_I2C_TX_ERR) != 0) { + txbd = ((I2C_BD *) state->txbd) - (n - i); + b = txbd->status & BD_I2C_TX_ERR; + if (b != 0) { if (state->err_cb != NULL) - (*state->err_cb)(I2CECB_TX_ERR|b, i, - state->cb_data); + (*state->err_cb) (I2CECB_TX_ERR | b, + i, state->cb_data); if (rc == 0) rc = I2CERR_IO_ERROR; } } } - if ((n = state->rx_idx) > 0) { + n = state->rx_idx; + + if (n > 0) { for (i = 0; i < n; i++) { - rxbd = ((I2C_BD*)state->rxbd) - (n - i); - if ((b = rxbd->status & BD_I2C_RX_ERR) != 0) { + rxbd = ((I2C_BD *) state->rxbd) - (n - i); + b = rxbd->status & BD_I2C_RX_ERR; + if (b != 0) { if (state->err_cb != NULL) - (*state->err_cb)(I2CECB_RX_ERR|b, i, - state->cb_data); + (*state->err_cb) (I2CECB_RX_ERR | b, + i, state->cb_data); if (rc == 0) rc = I2CERR_IO_ERROR; } } } - if ((txtimeo > 0 && txcnt >= txtimeo) || \ + if ((txtimeo > 0 && txcnt >= txtimeo) || (rxtimeo > 0 && rxcnt >= rxtimeo)) { if (state->err_cb != NULL) - (*state->err_cb)(I2CECB_TIMEOUT, -1, state->cb_data); + (*state->err_cb) (I2CECB_TIMEOUT, -1, state->cb_data); if (rc == 0) rc = I2CERR_TIMEOUT; } - return (rc); + return rc; } -static void -i2c_probe_callback(int flags, int xnum, void *data) +static void i2c_probe_callback(int flags, int xnum, void *data) { /* * the only acceptable errors are a transmit NAK or a receive @@ -610,14 +604,13 @@ i2c_probe_callback(int flags, int xnum, void *data) * means the device must have responded to the slave address * even though the transfer failed */ - if (flags == (I2CECB_TX_ERR|I2CECB_TX_NAK)) - *(int *)data |= 1; - if (flags == (I2CECB_RX_ERR|I2CECB_RX_OV)) - *(int *)data |= 2; + if (flags == (I2CECB_TX_ERR | I2CECB_TX_NAK)) + *(int *) data |= 1; + if (flags == (I2CECB_RX_ERR | I2CECB_RX_OV)) + *(int *) data |= 2; } -int -i2c_probe(uchar chip) +int i2c_probe(uchar chip) { i2c_state_t state; int rc, err_flag; @@ -629,31 +622,31 @@ i2c_probe(uchar chip) state.cb_data = (void *) &err_flag; err_flag = 0; - rc = i2c_receive(&state, chip, 0, I2CF_START_COND|I2CF_STOP_COND, 1, buf); + rc = i2c_receive(&state, chip, 0, I2CF_START_COND | I2CF_STOP_COND, 1, + buf); if (rc != 0) - return (rc); /* probe failed */ + return rc; /* probe failed */ rc = i2c_doio(&state); if (rc == 0) - return (0); /* device exists - read succeeded */ + return 0; /* device exists - read succeeded */ if (rc == I2CERR_TIMEOUT) - return (-1); /* device does not exist - timeout */ + return -1; /* device does not exist - timeout */ if (rc != I2CERR_IO_ERROR || err_flag == 0) - return (rc); /* probe failed */ + return rc; /* probe failed */ if (err_flag & 1) - return (-1); /* device does not exist - had transmit NAK */ + return -1; /* device does not exist - had transmit NAK */ - return (0); /* device exists - had receive overrun */ + return 0; /* device exists - had receive overrun */ } -int -i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) +int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) { i2c_state_t state; uchar xaddr[4]; @@ -661,27 +654,28 @@ i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) xaddr[0] = (addr >> 24) & 0xFF; xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; + xaddr[2] = (addr >> 8) & 0xFF; + xaddr[3] = addr & 0xFF; #ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address - * and the extra bits end up in the "chip address" bit slots. - * This makes a 24WC08 (1Kbyte) chip look like four 256 byte - * chips. - * - * Note that we consider the length of the address field to still - * be one byte because the extra address bits are hidden in the - * chip address. - */ + /* + * EEPROM chips that implement "address overflow" are ones + * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address + * and the extra bits end up in the "chip address" bit slots. + * This makes a 24WC08 (1Kbyte) chip look like four 256 byte + * chips. + * + * Note that we consider the length of the address field to still + * be one byte because the extra address bits are hidden in the + * chip address. + */ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif i2c_newio(&state); - rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]); + rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, + &xaddr[4 - alen]); if (rc != 0) { printf("i2c_read: i2c_send failed (%d)\n", rc); return 1; @@ -701,8 +695,7 @@ i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) return 0; } -int -i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) +int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) { i2c_state_t state; uchar xaddr[4]; @@ -710,27 +703,28 @@ i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) xaddr[0] = (addr >> 24) & 0xFF; xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; + xaddr[2] = (addr >> 8) & 0xFF; + xaddr[3] = addr & 0xFF; #ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address - * and the extra bits end up in the "chip address" bit slots. - * This makes a 24WC08 (1Kbyte) chip look like four 256 byte - * chips. - * - * Note that we consider the length of the address field to still - * be one byte because the extra address bits are hidden in the - * chip address. - */ + /* + * EEPROM chips that implement "address overflow" are ones + * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address + * and the extra bits end up in the "chip address" bit slots. + * This makes a 24WC08 (1Kbyte) chip look like four 256 byte + * chips. + * + * Note that we consider the length of the address field to still + * be one byte because the extra address bits are hidden in the + * chip address. + */ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif i2c_newio(&state); - rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]); + rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, + &xaddr[4 - alen]); if (rc != 0) { printf("i2c_write: first i2c_send failed (%d)\n", rc); return 1; @@ -765,7 +759,7 @@ int i2c_set_bus_num(unsigned int bus) if (bus < CONFIG_SYS_MAX_I2C_BUS) { i2c_bus_num = bus; } else { - int ret; + int ret; ret = i2x_mux_select_mux(bus); if (ret == 0) @@ -781,5 +775,5 @@ int i2c_set_bus_num(unsigned int bus) return 0; } -#endif /* CONFIG_I2C_MULTI_BUS */ -#endif /* CONFIG_HARD_I2C */ +#endif /* CONFIG_I2C_MULTI_BUS */ +#endif /* CONFIG_HARD_I2C */