From: Marek Vasut <marex@denx.de>
Date: Fri, 26 Sep 2014 23:18:29 +0000 (+0200)
Subject: arm: socfpga: Add example config entry for EPCS/EPCQ SPI
X-Git-Tag: v2015.01-rc2~89^2~4
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=8a78ca9ea57e019869ddac2ef10a15593f211997;p=u-boot

arm: socfpga: Add example config entry for EPCS/EPCQ SPI

Add example config file entry for the Altera SPI controller. This SPI
controller can also, under special conditions, be used to operate the
EPCS/EPCQ SPI NOR.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Vince Bridgers <vbridger@altera.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Stefan Roese <sr@denx.de>
Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
---

diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index f7b314d3ca..c213082be0 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -78,6 +78,25 @@
 #define CONFIG_SYS_L2_PL310
 #define CONFIG_SYS_PL310_BASE		SOCFPGA_MPUL2_ADDRESS
 
+/*
+ * EPCS/EPCQx1 Serial Flash Controller
+ */
+#ifdef CONFIG_ALTERA_SPI
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED		30000000
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_BAR
+/*
+ * The base address is configurable in QSys, each board must specify the
+ * base address based on it's particular FPGA configuration. Please note
+ * that the address here is incremented by  0x400  from the Base address
+ * selected in QSys, since the SPI registers are at offset +0x400.
+ * #define CONFIG_SYS_SPI_BASE		0xff240400
+ */
+#endif
+
 /*
  * Ethernet on SoC (EMAC)
  */