From: Hans de Goede Date: Sun, 16 Aug 2015 09:23:42 +0000 (+0200) Subject: sunxi: Drop LCD_MODE from A13-OLinuxIno defconfigs X-Git-Tag: v2015.10-rc3~40^2~27 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=8addd3ed7e6c1bcc54a4c9062e0bec6c302b462d;p=u-boot sunxi: Drop LCD_MODE from A13-OLinuxIno defconfigs With the unified / cleaned up default display output selection changes, which were done as part of adding composite video out support, our example LCD_MODE line in the A13-OLinuxIno defconfigs causes the display code to setup a LCD console by default, rather then a VGA console. Given that the LCD console is only useful for people who have hooked up the exact lcd-panel from the config, while most people will not have any lcd panel connected to these boards, this is not a good default. Dropping the LCD_MODE line which was intended as an example fixes this, instead add a link to the LCD_MODE help text pointing to http://linux-sunxi.org/LCD which contains the removed and other example modes. Signed-off-by: Hans de Goede Acked-by: Ian Campbell --- diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index fd6668fea2..55906b5b76 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -425,6 +425,7 @@ config VIDEO_LCD_MODE LCD panel timing details string, leave empty if there is no LCD panel. This is in drivers/video/videomodes.c: video_get_params() format, e.g. x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0 + Also see: http://linux-sunxi.org/LCD config VIDEO_LCD_DCLK_PHASE int "LCD panel display clock phase" diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig index dcaaff9220..5852be6d43 100644 --- a/configs/A13-OLinuXinoM_defconfig +++ b/configs/A13-OLinuXinoM_defconfig @@ -7,7 +7,6 @@ CONFIG_USB1_VBUS_PIN="PG11" # CONFIG_VIDEO_HDMI is not set CONFIG_VIDEO_VGA_VIA_LCD=y CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y -CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0" CONFIG_VIDEO_LCD_POWER="PB10" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino-micro" diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig index 4b4337223c..f1961f3190 100644 --- a/configs/A13-OLinuXino_defconfig +++ b/configs/A13-OLinuXino_defconfig @@ -8,7 +8,6 @@ CONFIG_AXP_GPIO=y # CONFIG_VIDEO_HDMI is not set CONFIG_VIDEO_VGA_VIA_LCD=y CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y -CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0" CONFIG_VIDEO_LCD_POWER="AXP0-0" CONFIG_VIDEO_LCD_BL_PWM="PB2" CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"