From: Simon Glass Date: Mon, 31 Aug 2015 01:19:16 +0000 (-0600) Subject: arm: Remove omap3_mvblx board X-Git-Tag: v2015.10-rc4~147 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=8dc372f93bd7d8f0ee87561d5c4b126697de85cc;p=u-boot arm: Remove omap3_mvblx board This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass --- diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index 83cb7fff42..b904098552 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -93,9 +93,6 @@ config TARGET_OMAP3_LOGIC select DM_SERIAL select DM_GPIO -config TARGET_OMAP3_MVBLX - bool "OMAP3 MVBLX" - config TARGET_NOKIA_RX51 bool "Nokia RX51" @@ -143,7 +140,6 @@ source "board/8dtech/eco5pk/Kconfig" source "board/corscience/tricorder/Kconfig" source "board/htkw/mcx/Kconfig" source "board/logicpd/omap3som/Kconfig" -source "board/matrix_vision/mvblx/Kconfig" source "board/nokia/rx51/Kconfig" source "board/technexion/tao3530/Kconfig" source "board/technexion/twister/Kconfig" diff --git a/board/matrix_vision/mvblx/Kconfig b/board/matrix_vision/mvblx/Kconfig deleted file mode 100644 index adbc20a934..0000000000 --- a/board/matrix_vision/mvblx/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_OMAP3_MVBLX - -config SYS_BOARD - default "mvblx" - -config SYS_VENDOR - default "matrix_vision" - -config SYS_CONFIG_NAME - default "omap3_mvblx" - -endif diff --git a/board/matrix_vision/mvblx/MAINTAINERS b/board/matrix_vision/mvblx/MAINTAINERS deleted file mode 100644 index 2f9a1532cb..0000000000 --- a/board/matrix_vision/mvblx/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MVBLX BOARD -M: Michael Jones -S: Maintained -F: board/matrix_vision/mvblx/ -F: include/configs/omap3_mvblx.h -F: configs/omap3_mvblx_defconfig diff --git a/board/matrix_vision/mvblx/Makefile b/board/matrix_vision/mvblx/Makefile deleted file mode 100644 index c056ebaf78..0000000000 --- a/board/matrix_vision/mvblx/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += mvblx.o fpga.o -obj-$(CONFIG_ID_EEPROM) += sys_eeprom.o - -ccflags-y += -Werror diff --git a/board/matrix_vision/mvblx/config.mk b/board/matrix_vision/mvblx/config.mk deleted file mode 100644 index de13072dab..0000000000 --- a/board/matrix_vision/mvblx/config.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# (C) Copyright 2006 -# Texas Instruments, -# -# Beagle Board uses OMAP3 (ARM-CortexA8) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# SPDX-License-Identifier: GPL-2.0+ -# -# Physical Address: -# 8000'0000 (bank0) -# A000/0000 (bank1) -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) - -# For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x80008000 diff --git a/board/matrix_vision/mvblx/fpga.c b/board/matrix_vision/mvblx/fpga.c deleted file mode 100644 index 7f9b245505..0000000000 --- a/board/matrix_vision/mvblx/fpga.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * (C) Copyright 2002 - * Rich Ireland, Enterasys Networks, rireland@enterasys.com. - * Keith Outwater, keith_outwater@mvis.com. - * - * (C) Copyright 2011 - * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de - * Michael Jones, Matrix Vision GmbH, michael.jones@matrix-vision.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include "fpga.h" - -#ifdef FPGA_DEBUG -#define fpga_debug(fmt, args...) printf("%s: "fmt, __func__, ##args) -#else -#define fpga_debug(fmt, args...) -#endif - -Altera_CYC2_Passive_Serial_fns altera_fns = { - fpga_null_fn, /* Altera_pre_fn */ - fpga_config_fn, - fpga_status_fn, - fpga_done_fn, - fpga_wr_fn, - fpga_null_fn, - fpga_null_fn, -}; - -Altera_desc cyclone2 = { - Altera_CYC2, - fast_passive_parallel, - Altera_EP3C5_SIZE, - (void *) &altera_fns, - NULL, - 0 -}; - -#define GPIO_RESET 43 -#define GPIO_DCLK 65 -#define GPIO_nSTATUS 157 -#define GPIO_CONF_DONE 158 -#define GPIO_nCONFIG 159 -#define GPIO_DATA0 54 -#define GPIO_DATA1 55 -#define GPIO_DATA2 56 -#define GPIO_DATA3 57 -#define GPIO_DATA4 58 -#define GPIO_DATA5 60 -#define GPIO_DATA6 61 -#define GPIO_DATA7 62 - -DECLARE_GLOBAL_DATA_PTR; - -/* return FPGA_SUCCESS on success, else FPGA_FAIL - */ -int mvblx_init_fpga(void) -{ - fpga_debug("Initializing FPGA interface\n"); - fpga_init(); - fpga_add(fpga_altera, &cyclone2); - - if (gpio_request(GPIO_DCLK, "dclk") || - gpio_request(GPIO_nSTATUS, "nStatus") || -#ifndef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE - gpio_request(GPIO_CONF_DONE, "conf_done") || -#endif - gpio_request(GPIO_nCONFIG, "nConfig") || - gpio_request(GPIO_DATA0, "data0") || - gpio_request(GPIO_DATA1, "data1") || - gpio_request(GPIO_DATA2, "data2") || - gpio_request(GPIO_DATA3, "data3") || - gpio_request(GPIO_DATA4, "data4") || - gpio_request(GPIO_DATA5, "data5") || - gpio_request(GPIO_DATA6, "data6") || - gpio_request(GPIO_DATA7, "data7")) { - printf("%s: error requesting GPIOs.", __func__); - return FPGA_FAIL; - } - - /* set up outputs */ - gpio_direction_output(GPIO_DCLK, 0); - gpio_direction_output(GPIO_nCONFIG, 0); - gpio_direction_output(GPIO_DATA0, 0); - gpio_direction_output(GPIO_DATA1, 0); - gpio_direction_output(GPIO_DATA2, 0); - gpio_direction_output(GPIO_DATA3, 0); - gpio_direction_output(GPIO_DATA4, 0); - gpio_direction_output(GPIO_DATA5, 0); - gpio_direction_output(GPIO_DATA6, 0); - gpio_direction_output(GPIO_DATA7, 0); - - /* NB omap_free_gpio() resets to an input, so we can't - * free ie. nCONFIG, or else the FPGA would reset - * Q: presumably gpio_free() has the same effect? - */ - - /* set up inputs */ - gpio_direction_input(GPIO_nSTATUS); -#ifndef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE - gpio_direction_input(GPIO_CONF_DONE); -#endif - - fpga_config_fn(0, 1, 0); - udelay(60); - - return FPGA_SUCCESS; -} - -int fpga_null_fn(int cookie) -{ - return 0; -} - -int fpga_config_fn(int assert, int flush, int cookie) -{ - fpga_debug("SET config : %s=%d\n", assert ? "low" : "high", assert); - if (flush) { - gpio_set_value(GPIO_nCONFIG, !assert); - udelay(1); - gpio_set_value(GPIO_nCONFIG, assert); - } - - return assert; -} - -int fpga_done_fn(int cookie) -{ - int result = 0; - - /* since revA of BLX, we will not get this signal. */ - udelay(10); -#ifdef CONFIG_SYS_FPGA_DONT_USE_CONF_DONE - fpga_debug("not waiting for CONF_DONE."); - result = 1; -#else - fpga_debug("CONF_DONE check ... "); - if (gpio_get_value(GPIO_CONF_DONE)) { - fpga_debug("high\n"); - result = 1; - } else - fpga_debug("low\n"); - gpio_free(GPIO_CONF_DONE); -#endif - - return result; -} - -int fpga_status_fn(int cookie) -{ - int result = 0; - fpga_debug("STATUS check ... "); - - result = gpio_get_value(GPIO_nSTATUS); - - if (result < 0) - fpga_debug("error\n"); - else if (result > 0) - fpga_debug("high\n"); - else - fpga_debug("low\n"); - - return result; -} - -static inline int _write_fpga(u8 byte) -{ - gpio_set_value(GPIO_DATA0, byte & 0x01); - gpio_set_value(GPIO_DATA1, (byte >> 1) & 0x01); - gpio_set_value(GPIO_DATA2, (byte >> 2) & 0x01); - gpio_set_value(GPIO_DATA3, (byte >> 3) & 0x01); - gpio_set_value(GPIO_DATA4, (byte >> 4) & 0x01); - gpio_set_value(GPIO_DATA5, (byte >> 5) & 0x01); - gpio_set_value(GPIO_DATA6, (byte >> 6) & 0x01); - gpio_set_value(GPIO_DATA7, (byte >> 7) & 0x01); - - /* clock */ - gpio_set_value(GPIO_DCLK, 1); - udelay(1); - gpio_set_value(GPIO_DCLK, 0); - udelay(1); - - return 0; -} - -int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie) -{ - unsigned char *data = (unsigned char *) buf; - int i; - int headerlen = len - cyclone2.size; - - if (headerlen < 0) - return FPGA_FAIL; - else if (headerlen == sizeof(uint32_t)) { - const unsigned int fpgavers_len = 11; /* '0x' + 8 hex digits + \0 */ - char fpgavers_str[fpgavers_len]; - snprintf(fpgavers_str, fpgavers_len, "0x%08x", - be32_to_cpup((uint32_t*)data)); - setenv("fpgavers", fpgavers_str); - } - - fpga_debug("fpga_wr: buf %p / size %d\n", buf, len); - for (i = headerlen; i < len; i++) - _write_fpga(data[i]); - fpga_debug("-%s\n", __func__); - - return FPGA_SUCCESS; -} diff --git a/board/matrix_vision/mvblx/fpga.h b/board/matrix_vision/mvblx/fpga.h deleted file mode 100644 index 411b039c01..0000000000 --- a/board/matrix_vision/mvblx/fpga.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * (C) Copyright 2002 - * Rich Ireland, Enterasys Networks, rireland@enterasys.com. - * Keith Outwater, keith_outwater@mvis.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -extern int mvblx_init_fpga(void); - -extern int fpga_status_fn(int cookie); -extern int fpga_config_fn(int assert, int flush, int cookie); -extern int fpga_done_fn(int cookie); -extern int fpga_wr_fn(const void *buf, size_t len, int flush, int cookie); -extern int fpga_null_fn(int cookie); diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c deleted file mode 100644 index c9d615b79a..0000000000 --- a/board/matrix_vision/mvblx/mvblx.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * MATRIX VISION GmbH mvBlueLYNX-X - * - * Derived from Beagle and Overo - * - * (C) Copyright 2004-2008 - * Texas Instruments, - * - * Author : - * Sunil Kumar - * Shashi Ranjan - * - * Derived from Beagle Board and 3430 SDP code by - * Richard Woodruff - * Syed Mohammed Khasim - * - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "mvblx.h" -#include "fpga.h" - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_CMD_NET) -static void setup_net_chip(void); -#endif /* CONFIG_CMD_NET */ - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - printf("mvBlueLYNX-X\n"); - if (get_cpu_family() == CPU_OMAP36XX) - setenv("mpurate", "1000"); - else - setenv("mpurate", "600"); - - twl4030_power_init(); - -#if defined(CONFIG_CMD_NET) - setup_net_chip(); -#endif /* CONFIG_CMD_NET */ - - mvblx_init_fpga(); - - mac_read_from_eeprom(); - - dieid_num_r(); - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_MVBLX(); -} - -#ifdef CONFIG_GENERIC_MMC -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(0, 0, 0, -1, -1); - omap_mmc_init(1, 0, 0, -1, -1); - return 0; -} - -void board_mmc_power_init(void) -{ - twl4030_power_mmc_init(0); - twl4030_power_mmc_init(1); -} -#endif - -#if defined(CONFIG_CMD_NET) -/* - * Routine: setup_net_chip - * Description: Setting up the configuration GPMC registers specific to the - * Ethernet hardware. - */ -static void setup_net_chip(void) -{ - struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; - struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; - - /* Configure GPMC registers */ - writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[0].config1); - writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[0].config2); - writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[0].config3); - writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[0].config4); - writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[0].config5); - writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[0].config6); - writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[0].config7); - - /* Enable off mode for NWE in PADCONF_GPMC_NWE register */ - writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe); - /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe); - /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */ - writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00, - &ctrl_base->gpmc_nadv_ale); - - /* Make GPIO 139 as output pin */ - writel(readl(&gpio5_base->oe) & ~(GPIO11), &gpio5_base->oe); - - /* Now send a pulse on the GPIO pin */ - writel(GPIO11, &gpio5_base->setdataout); - udelay(1); - writel(GPIO11, &gpio5_base->cleardataout); - udelay(1); - writel(GPIO11, &gpio5_base->setdataout); -} - -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_SMC911X - rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); -#endif - return rc; -} - -int overwrite_console(void) -{ - /* return true if console should be overwritten */ - return 0; -} - -#endif /* CONFIG_CMD_NET */ diff --git a/board/matrix_vision/mvblx/mvblx.h b/board/matrix_vision/mvblx/mvblx.h deleted file mode 100644 index 6c1c752e48..0000000000 --- a/board/matrix_vision/mvblx/mvblx.h +++ /dev/null @@ -1,346 +0,0 @@ -/* - * (C) Copyright 2008 - * Dirk Behme - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef _MVBLX_H_ -#define _MVBLX_H_ - -#include - -const omap3_sysinfo sysinfo = { - DDR_DISCRETE, - "OMAP3 mvBlueLYNX-X camera", - "no NAND", -}; - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_MVBLX() \ - /*SDRC*/\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\ - /*GPMC*/\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0)) /*GPMC_A1*/\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0)) /*GPMC_A2*/\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0)) /*GPMC_A3*/\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0)) /*GPMC_A4*/\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0)) /*GPMC_A5*/\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0)) /*GPMC_A6*/\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0)) /*GPMC_A7*/\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M4)) /*GPIO_41*/\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M4)) /*GPIO_42*/\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M4)) /*GPIO_43*/\ - MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0)) /*GPMC_D0*/\ - MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0)) /*GPMC_D1*/\ - MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0)) /*GPMC_D2*/\ - MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0)) /*GPMC_D3*/\ - MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0)) /*GPMC_D4*/\ - MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0)) /*GPMC_D5*/\ - MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0)) /*GPMC_D6*/\ - MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0)) /*GPMC_D7*/\ - MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0)) /*GPMC_D8*/\ - MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0)) /*GPMC_D9*/\ - MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0)) /*GPMC_D10*/\ - MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0)) /*GPMC_D11*/\ - MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0)) /*GPMC_D12*/\ - MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0)) /*GPMC_D13*/\ - MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0)) /*GPMC_D14*/\ - MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0)) /*GPMC_D15*/\ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | EN | M4)) /*GPIO54*/\ - MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M4)) /*GPIO55*/\ - MUX_VAL(CP(GPMC_NCS5), (IEN | PTU | EN | M4)) /*GPIO56*/\ - MUX_VAL(CP(GPMC_NCS6), (IEN | PTU | EN | M4)) /*GPIO57*/\ - MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M4)) /*GPIO58*/\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTU | EN | M0)) /*GPMC_CLK*/\ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\ - MUX_VAL(CP(GPMC_NBE0_CLE), (IEN | PTU | EN | M4)) /*GPIO60*/\ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTU | EN | M4)) /*GPIO61*/\ - MUX_VAL(CP(GPMC_NWP), (IEN | PTU | EN | M4)) /*GPIO62*/\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\ - MUX_VAL(CP(GPMC_WAIT3), (IDIS | PTU | EN | M4)) /*GPIO65*/\ - /*DSS*/\ - MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\ - MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\ - MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\ - MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\ - MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M4)) /*not_used*/\ - MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\ - MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\ - MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\ - MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\ - MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\ - MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\ - MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\ - MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\ - MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\ - MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\ - MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\ - MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\ - MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M3)) /*DSS_DATA0*/\ - MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M3)) /*DSS_DATA1*/\ - MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M3)) /*DSS_DATA2*/\ - MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M3)) /*DSS_DATA3*/\ - MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M3)) /*DSS_DATA4*/\ - MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M3)) /*DSS_DATA5*/\ - /*CAMERA*/\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) /*CAM_HS */\ - MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) /*CAM_VS */\ - MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) /*CAM_PCLK*/\ - MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ - MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) /*CAM_D0*/\ - MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) /*CAM_D1*/\ - MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) /*CAM_D2*/\ - MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) /*CAM_D3*/\ - MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) /*CAM_D4*/\ - MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) /*CAM_D5*/\ - MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) /*CAM_D6*/\ - MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) /*CAM_D7*/\ - MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) /*CAM_D8*/\ - MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) /*CAM_D9*/\ - MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) /*CAM_D10*/\ - MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) /*CAM_D11*/\ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\ - MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\ - MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\ - MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) /*CSI2_DX1*/\ - MUX_VAL(CP(CSI2_DY1), (IEN | PTD | DIS | M0)) /*CSI2_DY1*/\ - /*Audio Interface */\ - MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\ - MUX_VAL(CP(MCBSP2_CLKX), (IEN | PTD | DIS | M0)) /*McBSP2_CLKX*/\ - MUX_VAL(CP(MCBSP2_DR), (IEN | PTD | DIS | M0)) /*McBSP2_DR*/\ - MUX_VAL(CP(MCBSP2_DX), (IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\ - /*Expansion card 1*/\ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /*MMC1_CLK*/\ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /*MMC1_CMD*/\ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /*MMC1_DAT0*/\ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /*MMC1_DAT1*/\ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /*MMC1_DAT2*/\ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /*MMC1_DAT3*/\ - MUX_VAL(CP(MMC1_DAT4), (IDIS | PTU | DIS | M4)) /*GPIO_?*/\ - MUX_VAL(CP(MMC1_DAT5), (IDIS | PTU | DIS | M4)) /*GPIO_?*/\ - MUX_VAL(CP(MMC1_DAT6), (IDIS | PTU | DIS | M4)) /*GPIO_?*/\ - MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | DIS | M7)) /*GPIO_129 disabled*/\ - /*Expansion card 2 */\ - MUX_VAL(CP(MMC2_CLK), (IEN | PTU | DIS | M0)) /*MMC2_CLK*/\ - MUX_VAL(CP(MMC2_CMD), (IEN | PTU | DIS | M0)) /*MMC2_CMD*/\ - MUX_VAL(CP(MMC2_DAT0), (IEN | PTU | DIS | M0)) /*MMC2_DAT0*/\ - MUX_VAL(CP(MMC2_DAT1), (IEN | PTU | DIS | M0)) /*MMC2_DAT1*/\ - MUX_VAL(CP(MMC2_DAT2), (IEN | PTU | DIS | M0)) /*MMC2_DAT2*/\ - MUX_VAL(CP(MMC2_DAT3), (IEN | PTU | DIS | M0)) /*MMC2_DAT3*/\ - MUX_VAL(CP(MMC2_DAT4), (IDIS | PTU | DIS | M4)) /*GPIO_136*/\ - MUX_VAL(CP(MMC2_DAT5), (IEN | PTU | EN | M4)) /*GPIO_137*/\ - MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | DIS | M4)) /*GPIO_138*/\ - MUX_VAL(CP(MMC2_DAT7), (IEN | PTU | EN | M4)) /*GPIO_139*/\ - /*Bluetooth*/\ - MUX_VAL(CP(MCBSP3_DX), (IDIS | PTD | DIS | M1)) /*UART2_CTS*/\ - MUX_VAL(CP(MCBSP3_DR), (IDIS | PTD | DIS | M1)) /*UART2_RTS*/\ - MUX_VAL(CP(MCBSP3_CLKX), (IDIS | PTD | DIS | M1)) /*UART2_TX*/\ - MUX_VAL(CP(MCBSP3_FSX), (IDIS | PTD | DIS | M1)) /*UART2_RX*/\ - /*Modem Interface */\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\ - MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M4)) /*GPIO_149*/ \ - MUX_VAL(CP(UART1_CTS), (IEN | PTU | EN | M4)) /*GPIO_150*/ \ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\ - MUX_VAL(CP(MCBSP1_CLKR), (IDIS | PTD | DIS | M4)) /*GPIO_156*/\ - MUX_VAL(CP(MCBSP1_FSR), (IEN | PTU | EN | M4)) /*GPIO_157*/\ - MUX_VAL(CP(MCBSP1_DX), (IEN | PTU | DIS | M4)) /*GPIO_158 1-wire */\ - MUX_VAL(CP(MCBSP1_DR), (IDIS | PTD | DIS | M4)) /*GPIO_159*/\ - MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) /*McBSP_CLKS*/\ - MUX_VAL(CP(MCBSP1_FSX), (IDIS | PTD | DIS | M4)) /*GPIO_161*/\ - MUX_VAL(CP(MCBSP1_CLKX), (IDIS | PTD | DIS | M4)) /*GPIO_162*/\ - /*Serial Interface*/\ - MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX*/\ - MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\ - MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\ - MUX_VAL(CP(HSUSB0_CLK), (IEN | PTD | DIS | M0)) /*HSUSB0_CLK*/\ - MUX_VAL(CP(HSUSB0_STP), (IDIS | PTU | EN | M0)) /*HSUSB0_STP*/\ - MUX_VAL(CP(HSUSB0_DIR), (IEN | PTD | DIS | M0)) /*HSUSB0_DIR*/\ - MUX_VAL(CP(HSUSB0_NXT), (IEN | PTD | DIS | M0)) /*HSUSB0_NXT*/\ - MUX_VAL(CP(HSUSB0_DATA0), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA0*/\ - MUX_VAL(CP(HSUSB0_DATA1), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA1*/\ - MUX_VAL(CP(HSUSB0_DATA2), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA2*/\ - MUX_VAL(CP(HSUSB0_DATA3), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA3*/\ - MUX_VAL(CP(HSUSB0_DATA4), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA4*/\ - MUX_VAL(CP(HSUSB0_DATA5), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA5*/\ - MUX_VAL(CP(HSUSB0_DATA6), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA6*/\ - MUX_VAL(CP(HSUSB0_DATA7), (IEN | PTD | DIS | M0)) /*HSUSB0_DATA7*/\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /*I2C1_SCL*/\ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /*I2C1_SDA*/\ - MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)) /*I2C2_SCL*/\ - MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)) /*I2C2_SDA*/\ - MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)) /*I2C3_SCL*/\ - MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)) /*I2C3_SDA*/\ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /*I2C4_SCL*/\ - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /*I2C4_SDA*/\ - MUX_VAL(CP(HDQ_SIO), (IDIS | PTU | EN | M4)) /*GPIO_170*/\ - MUX_VAL(CP(MCSPI1_CLK), (IDIS | PTU | DIS | M4)) /*GPIO_171*/\ - MUX_VAL(CP(MCSPI1_SIMO), (IDIS | PTU | DIS | M4)) /*GPIO_172*/\ - MUX_VAL(CP(MCSPI1_SOMI), (IDIS | PTU | DIS | M4)) /*GPIO_173*/\ - MUX_VAL(CP(MCSPI1_CS0), (IDIS | PTD | DIS | M4)) /*GPIO_174*/\ - MUX_VAL(CP(MCSPI1_CS3), (IDIS | PTU | DIS | M4)) /*GPIO_177*/\ - /* USB EHCI (port 2) not used */\ - MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)) /*McSPI2_CLK*/\ - MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)) /*McSPI2_SIMO*/\ - MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)) /*McSPI2_SOMI*/\ - MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)) /*McSPI2_CS0*/\ - MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) /*McSPI2_CS1*/\ - /*Control and debug */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\ - MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0)) /*SYS_CLKREQ*/\ - MUX_VAL(CP(SYS_NIRQ), (IEN | PTU | EN | M0)) /*SYS_nIRQ*/\ - MUX_VAL(CP(SYS_BOOT0), (IDIS | PTD | DIS | M3)) /*DSS_DATA18*/\ - MUX_VAL(CP(SYS_BOOT1), (IDIS | PTD | DIS | M3)) /*DSS_DATA19*/\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M0)) /*GPIO_4*/\ - MUX_VAL(CP(SYS_BOOT3), (IDIS | PTD | DIS | M3)) /*DSS_DATA20*/\ - MUX_VAL(CP(SYS_BOOT4), (IDIS | PTD | DIS | M3)) /*DSS_DATA21*/\ - MUX_VAL(CP(SYS_BOOT5), (IDIS | PTD | DIS | M3)) /*DSS_DATA22*/\ - MUX_VAL(CP(SYS_BOOT6), (IDIS | PTD | DIS | M3)) /*DSS_DATA23*/ \ - MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) /*SYS_OFF_MODE*/\ - MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M4)) /*GPIO_10*/\ - MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTD | DIS | M0)) /*SYS_CLKOUT2*/\ - /* USB EHCI (port 1) */\ - MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M3)) /*HSUSB1_STP*/\ - MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\ - MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA0*/\ - MUX_VAL(CP(ETK_D1_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA1*/\ - MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA2*/\ - MUX_VAL(CP(ETK_D3_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA7*/\ - MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA4*/\ - MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA5*/\ - MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA6*/\ - MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DATA3*/\ - MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_DIR*/\ - MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | DIS | M3)) /*HSUSB1_NXT*/\ - MUX_VAL(CP(ETK_D10_ES2), (IEN | PTU | EN | M4)) /*GPIO_24*/\ - MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M4)) /*GPIO_25*/\ - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M4)) /*GPIO_26*/\ - MUX_VAL(CP(ETK_D13_ES2), (IEN | PTU | DIS | M4)) /*GPIO_27*/\ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTU | DIS | M4)) /*GPIO_28*/\ - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTU | DIS | M4)) /*GPIO_29*/\ - /*Die to Die */\ - MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)) /*d2d_mcad1*/\ - MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)) /*d2d_mcad2*/\ - MUX_VAL(CP(D2D_MCAD3), (IEN | PTD | EN | M0)) /*d2d_mcad3*/\ - MUX_VAL(CP(D2D_MCAD4), (IEN | PTD | EN | M0)) /*d2d_mcad4*/\ - MUX_VAL(CP(D2D_MCAD5), (IEN | PTD | EN | M0)) /*d2d_mcad5*/\ - MUX_VAL(CP(D2D_MCAD6), (IEN | PTD | EN | M0)) /*d2d_mcad6*/\ - MUX_VAL(CP(D2D_MCAD7), (IEN | PTD | EN | M0)) /*d2d_mcad7*/\ - MUX_VAL(CP(D2D_MCAD8), (IEN | PTD | EN | M0)) /*d2d_mcad8*/\ - MUX_VAL(CP(D2D_MCAD9), (IEN | PTD | EN | M0)) /*d2d_mcad9*/\ - MUX_VAL(CP(D2D_MCAD10), (IEN | PTD | EN | M0)) /*d2d_mcad10*/\ - MUX_VAL(CP(D2D_MCAD11), (IEN | PTD | EN | M0)) /*d2d_mcad11*/\ - MUX_VAL(CP(D2D_MCAD12), (IEN | PTD | EN | M0)) /*d2d_mcad12*/\ - MUX_VAL(CP(D2D_MCAD13), (IEN | PTD | EN | M0)) /*d2d_mcad13*/\ - MUX_VAL(CP(D2D_MCAD14), (IEN | PTD | EN | M0)) /*d2d_mcad14*/\ - MUX_VAL(CP(D2D_MCAD15), (IEN | PTD | EN | M0)) /*d2d_mcad15*/\ - MUX_VAL(CP(D2D_MCAD16), (IEN | PTD | EN | M0)) /*d2d_mcad16*/\ - MUX_VAL(CP(D2D_MCAD17), (IEN | PTD | EN | M0)) /*d2d_mcad17*/\ - MUX_VAL(CP(D2D_MCAD18), (IEN | PTD | EN | M0)) /*d2d_mcad18*/\ - MUX_VAL(CP(D2D_MCAD19), (IEN | PTD | EN | M0)) /*d2d_mcad19*/\ - MUX_VAL(CP(D2D_MCAD20), (IEN | PTD | EN | M0)) /*d2d_mcad20*/\ - MUX_VAL(CP(D2D_MCAD21), (IEN | PTD | EN | M0)) /*d2d_mcad21*/\ - MUX_VAL(CP(D2D_MCAD22), (IEN | PTD | EN | M0)) /*d2d_mcad22*/\ - MUX_VAL(CP(D2D_MCAD23), (IEN | PTD | EN | M0)) /*d2d_mcad23*/\ - MUX_VAL(CP(D2D_MCAD24), (IEN | PTD | EN | M0)) /*d2d_mcad24*/\ - MUX_VAL(CP(D2D_MCAD25), (IEN | PTD | EN | M0)) /*d2d_mcad25*/\ - MUX_VAL(CP(D2D_MCAD26), (IEN | PTD | EN | M0)) /*d2d_mcad26*/\ - MUX_VAL(CP(D2D_MCAD27), (IEN | PTD | EN | M0)) /*d2d_mcad27*/\ - MUX_VAL(CP(D2D_MCAD28), (IEN | PTD | EN | M0)) /*d2d_mcad28*/\ - MUX_VAL(CP(D2D_MCAD29), (IEN | PTD | EN | M0)) /*d2d_mcad29*/\ - MUX_VAL(CP(D2D_MCAD30), (IEN | PTD | EN | M0)) /*d2d_mcad30*/\ - MUX_VAL(CP(D2D_MCAD31), (IEN | PTD | EN | M0)) /*d2d_mcad31*/\ - MUX_VAL(CP(D2D_MCAD32), (IEN | PTD | EN | M0)) /*d2d_mcad32*/\ - MUX_VAL(CP(D2D_MCAD33), (IEN | PTD | EN | M0)) /*d2d_mcad33*/\ - MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) /*d2d_mcad34*/\ - MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) /*d2d_mcad35*/\ - MUX_VAL(CP(D2D_MCAD36), (IEN | PTD | EN | M0)) /*d2d_mcad36*/\ - MUX_VAL(CP(D2D_CLK26MI), (IEN | PTD | DIS | M0)) /*d2d_clk26mi*/\ - MUX_VAL(CP(D2D_NRESPWRON), (IEN | PTD | EN | M0)) /*d2d_nrespwron*/\ - MUX_VAL(CP(D2D_NRESWARM), (IEN | PTU | EN | M0)) /*d2d_nreswarm */\ - MUX_VAL(CP(D2D_ARM9NIRQ), (IEN | PTD | DIS | M0)) /*d2d_arm9nirq */\ - MUX_VAL(CP(D2D_UMA2P6FIQ), (IEN | PTD | DIS | M0)) /*d2d_uma2p6fiq*/\ - MUX_VAL(CP(D2D_SPINT), (IEN | PTD | EN | M0)) /*d2d_spint*/\ - MUX_VAL(CP(D2D_FRINT), (IEN | PTD | EN | M0)) /*d2d_frint*/\ - MUX_VAL(CP(D2D_DMAREQ0), (IEN | PTD | DIS | M0)) /*d2d_dmareq0*/\ - MUX_VAL(CP(D2D_DMAREQ1), (IEN | PTD | DIS | M0)) /*d2d_dmareq1*/\ - MUX_VAL(CP(D2D_DMAREQ2), (IEN | PTD | DIS | M0)) /*d2d_dmareq2*/\ - MUX_VAL(CP(D2D_DMAREQ3), (IEN | PTD | DIS | M0)) /*d2d_dmareq3*/\ - MUX_VAL(CP(D2D_N3GTRST), (IEN | PTD | DIS | M0)) /*d2d_n3gtrst*/\ - MUX_VAL(CP(D2D_N3GTDI), (IEN | PTD | DIS | M0)) /*d2d_n3gtdi*/\ - MUX_VAL(CP(D2D_N3GTDO), (IEN | PTD | DIS | M0)) /*d2d_n3gtdo*/\ - MUX_VAL(CP(D2D_N3GTMS), (IEN | PTD | DIS | M0)) /*d2d_n3gtms*/\ - MUX_VAL(CP(D2D_N3GTCK), (IEN | PTD | DIS | M0)) /*d2d_n3gtck*/\ - MUX_VAL(CP(D2D_N3GRTCK), (IEN | PTD | DIS | M0)) /*d2d_n3grtck*/\ - MUX_VAL(CP(D2D_MSTDBY), (IEN | PTU | EN | M0)) /*d2d_mstdby*/\ - MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0)) /*d2d_swakeup*/\ - MUX_VAL(CP(D2D_IDLEREQ), (IEN | PTD | DIS | M0)) /*d2d_idlereq*/\ - MUX_VAL(CP(D2D_IDLEACK), (IEN | PTU | EN | M0)) /*d2d_idleack*/\ - MUX_VAL(CP(D2D_MWRITE), (IEN | PTD | DIS | M0)) /*d2d_mwrite*/\ - MUX_VAL(CP(D2D_SWRITE), (IEN | PTD | DIS | M0)) /*d2d_swrite*/\ - MUX_VAL(CP(D2D_MREAD), (IEN | PTD | DIS | M0)) /*d2d_mread*/\ - MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)) /*d2d_sread*/\ - MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_mbusflag*/\ - MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)) /*d2d_sbusflag*/\ - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/ - -#endif diff --git a/board/matrix_vision/mvblx/sys_eeprom.c b/board/matrix_vision/mvblx/sys_eeprom.c deleted file mode 100644 index db42987010..0000000000 --- a/board/matrix_vision/mvblx/sys_eeprom.c +++ /dev/null @@ -1,403 +0,0 @@ -/* - * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor - * York Sun (yorksun@freescale.com) - * Haiying Wang (haiying.wang@freescale.com) - * Timur Tabi (timur@freescale.com) - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include - -/* #define DEBUG */ - -/* - * static eeprom: EEPROM layout - */ -static struct __attribute__ ((__packed__)) eeprom { - u8 id[16]; /* 0x01 - 0x0F Type e.g. 100wG-5111 */ - u8 sn[10]; /* 0x10 - 0x19 Serial Number */ - u8 date[6]; /* 0x1A - 0x1F Build Date */ - u8 mac[6]; /* 0x20 - 0x25 MAC address */ - u8 reserved[10];/* 0x26 - 0x2f reserved */ - u32 crc; /* x+1 CRC32 checksum */ -} e; - -/* Set to 1 if we've read EEPROM into memory */ -static int has_been_read; - -/** - * show_eeprom - display the contents of the EEPROM - */ -static void show_eeprom(void) -{ - unsigned int crc; - char safe_string[16]; - -#ifdef DEBUG - int i; -#endif - u8 *p; - - /* ID */ - strncpy(safe_string, (char *)e.id, sizeof(e.id)); - safe_string[sizeof(e.id)-1] = 0; - printf("ID: mvBlueLYNX-X%s\n", safe_string); - - /* Serial number */ - strncpy(safe_string, (char *)e.sn, sizeof(e.sn)); - safe_string[sizeof(e.sn)-1] = 0; - printf("SN: %s\n", safe_string); - - /* Build date, BCD date values, as YYMMDDhhmmss */ - printf("Build date: 20%02x/%02x/%02x %02x:%02x:%02x %s\n", - e.date[0], e.date[1], e.date[2], - e.date[3] & 0x7F, e.date[4], e.date[5], - e.date[3] & 0x80 ? "PM" : ""); - - /* Show MAC address */ - p = e.mac; - printf("Eth: %02x:%02x:%02x:%02x:%02x:%02x\n", - p[0], p[1], p[2], p[3], p[4], p[5]); - - crc = crc32(0, (void *)&e, sizeof(e) - 4); - - if (crc == be32_to_cpu(e.crc)) - printf("CRC: %08x\n", be32_to_cpu(e.crc)); - else - printf("CRC: %08x (should be %08x)\n", be32_to_cpu(e.crc), crc); - -#ifdef DEBUG - printf("EEPROM dump: (0x%x bytes)\n", sizeof(e)); - for (i = 0; i < sizeof(e); i++) { - if ((i % 16) == 0) - printf("%02X: ", i); - printf("%02X ", ((u8 *)&e)[i]); - if (((i % 16) == 15) || (i == sizeof(e) - 1)) - printf("\n"); - } -#endif -} - -/** - * read_eeprom - read the EEPROM into memory - */ -static int read_eeprom(void) -{ - int ret; -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - unsigned int bus; -#endif - - if (has_been_read) - return 0; - -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - bus = i2c_get_bus_num(); - i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); -#endif - - ret = eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - (uchar *)&e, sizeof(e)); - -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - i2c_set_bus_num(bus); -#endif - -#ifdef DEBUG - show_eeprom(); -#endif - - has_been_read = (ret == 0) ? 1 : 0; - - return ret; -} - -/** - * update_crc - update the CRC - * - * This function should be called after each update to the EEPROM structure, - * to make sure the CRC is always correct. - */ -static void update_crc(void) -{ - u32 crc; - - crc = crc32(0, (void *)&e, sizeof(e) - 4); - e.crc = cpu_to_be32(crc); -} - -/** - * prog_eeprom - write the EEPROM from memory - */ -static int prog_eeprom(void) -{ - int ret = 0; -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - unsigned int bus; -#endif - - update_crc(); - -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - bus = i2c_get_bus_num(); - i2c_set_bus_num(CONFIG_SYS_EEPROM_BUS_NUM); -#endif - - ret = eeprom_write(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - (uchar *)&e, sizeof(e)); - - if (!ret) { - /* Verify the write by reading back the EEPROM and comparing */ - struct eeprom e2; -#ifdef DEBUG - printf("%s verifying...\n", __func__); -#endif - ret = eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, - (uchar *)&e2, sizeof(e2)); - - if (!ret && memcmp(&e, &e2, sizeof(e))) - ret = -1; - } - -#ifdef CONFIG_SYS_EEPROM_BUS_NUM - i2c_set_bus_num(bus); -#endif - - if (ret) { - printf("Programming failed.\n"); - has_been_read = 0; - return -1; - } - - printf("Programming passed.\n"); - return 0; -} - -/** - * h2i - converts hex character into a number - * - * This function takes a hexadecimal character (e.g. '7' or 'C') and returns - * the integer equivalent. - */ -static inline u8 h2i(char p) -{ - if ((p >= '0') && (p <= '9')) - return p - '0'; - - if ((p >= 'A') && (p <= 'F')) - return (p - 'A') + 10; - - if ((p >= 'a') && (p <= 'f')) - return (p - 'a') + 10; - - return 0; -} - -/** - * set_date - stores the build date into the EEPROM - * - * This function takes a pointer to a string in the format "YYMMDDhhmmss" - * (2-digit year, 2-digit month, etc), converts it to a 6-byte BCD string, - * and stores it in the build date field of the EEPROM local copy. - */ -static void set_date(const char *string) -{ - unsigned int i; - - if (strlen(string) != 12) { - printf("Usage: mac date YYMMDDhhmmss\n"); - return; - } - - for (i = 0; i < 6; i++) - e.date[i] = h2i(string[2 * i]) << 4 | h2i(string[2 * i + 1]); - - update_crc(); -} - -/** - * set_mac_address - stores a MAC address into the EEPROM - * - * This function takes a pointer to MAC address string - * (i.e."XX:XX:XX:XX:XX:XX", where "XX" is a two-digit hex number) and - * stores it in the MAC address field in the EEPROM local copy. - */ -static void set_mac_address(const char *string) -{ - char *p = (char *) string; - unsigned int i; - - for (i = 0; *p && (i < 6); i++) { - e.mac[i] = simple_strtoul(p, &p, 16); - if (*p == ':') - p++; - } - - update_crc(); -} - -int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - char cmd; - - if (argc == 1) { - show_eeprom(); - return 0; - } - - cmd = argv[1][0]; - - if (cmd == 'r') { -#ifdef DEBUG - printf("%s read\n", __func__); -#endif - read_eeprom(); - return 0; - } - - if (argc == 2) { - switch (cmd) { - case 's': /* save */ -#ifdef DEBUG - printf("%s save\n", __func__); -#endif - prog_eeprom(); - break; - default: - return cmd_usage(cmdtp); - } - - return 0; - } - - /* We know we have at least one parameter */ - - switch (cmd) { - case 'n': /* serial number */ -#ifdef DEBUG - printf("%s serial number\n", __func__); -#endif - memset(e.sn, 0, sizeof(e.sn)); - strncpy((char *)e.sn, argv[2], sizeof(e.sn) - 1); - update_crc(); - break; - case 'd': /* date BCD format YYMMDDhhmmss */ - set_date(argv[2]); - break; - case 'e': /* errata */ - printf("mac errata not implemented\n"); - break; - case 'i': /* id */ - memset(e.id, 0, sizeof(e.id)); - strncpy((char *)e.id, argv[2], sizeof(e.id) - 1); - update_crc(); - break; - case 'p': /* ports */ - printf("mac ports not implemented (always 1 port)\n"); - break; - case '0' ... '9': - /* we only have "mac 0" but any digit can be used here */ - set_mac_address(argv[2]); - break; - case 'h': /* help */ - default: - return cmd_usage(cmdtp); - } - - return 0; -} - -static inline int is_portrait(void) -{ - int i; - unsigned int orient_index = 0; /* idx of char which determines orientation */ - - for (i = sizeof(e.id)/sizeof(*e.id) - 1; i>=0; i--) { - if (e.id[i] == '-') { - orient_index = i+1; - break; - } - } - - return (orient_index && - (e.id[orient_index] >= '5') && (e.id[orient_index] <= '8')); -} - -int mac_read_from_eeprom(void) -{ - u32 crc, crc_offset = offsetof(struct eeprom, crc); - u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */ -#define FILENAME_LANDSCAPE "mvBlueLynx_X.rbf" -#define FILENAME_PORTRAIT "mvBlueLynx_X_sensor_cd.rbf" - - if (read_eeprom()) { - printf("EEPROM Read failed.\n"); - return -1; - } - - crc = crc32(0, (void *)&e, crc_offset); - crcp = (void *)&e + crc_offset; - if (crc != be32_to_cpu(*crcp)) { - printf("EEPROM CRC mismatch (%08x != %08x)\n", crc, - be32_to_cpu(e.crc)); - return -1; - } - - if (memcmp(&e.mac, "\0\0\0\0\0\0", 6) && - memcmp(&e.mac, "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) { - char ethaddr[18]; - - sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X", - e.mac[0], - e.mac[1], - e.mac[2], - e.mac[3], - e.mac[4], - e.mac[5]); - /* Only initialize environment variables that are blank - * (i.e. have not yet been set) - */ - if (!getenv("ethaddr")) - setenv("ethaddr", ethaddr); - } - - if (memcmp(&e.sn, "\0\0\0\0\0\0\0\0\0\0", 10) && - memcmp(&e.sn, "\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF", 10)) { - char serial_num[12]; - - strncpy(serial_num, (char *)e.sn, sizeof(e.sn) - 1); - /* Only initialize environment variables that are blank - * (i.e. have not yet been set) - */ - if (!getenv("serial#")) - setenv("serial#", serial_num); - } - - /* decide which fpga file to load depending on orientation */ - if (is_portrait()) - setenv("fpgafilename", FILENAME_PORTRAIT); - else - setenv("fpgafilename", FILENAME_LANDSCAPE); - - /* TODO should I calculate CRC here? */ - return 0; -} - -#ifdef CONFIG_SERIAL_TAG -void get_board_serial(struct tag_serialnr *serialnr) -{ - char *serial = getenv("serial#"); - - if (serial && (strlen(serial) > 3)) { - /* use the numerical part of the serial number LXnnnnnn */ - serialnr->high = 0; - serialnr->low = simple_strtoul(serial + 2, NULL, 10); - } else { - serialnr->high = 0; - serialnr->low = 0; - } -} -#endif diff --git a/configs/omap3_mvblx_defconfig b/configs/omap3_mvblx_defconfig deleted file mode 100644 index fb12a70560..0000000000 --- a/configs/omap3_mvblx_defconfig +++ /dev/null @@ -1,9 +0,0 @@ -CONFIG_ARM=y -CONFIG_OMAP34XX=y -CONFIG_TARGET_OMAP3_MVBLX=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_STOP_STR="S" -# CONFIG_CMD_IMLS is not set -# CONFIG_CMD_FLASH is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_SYS_PROMPT="mvblx # " diff --git a/doc/README.omap3 b/doc/README.omap3 index a62c357405..e09ac032c0 100644 --- a/doc/README.omap3 +++ b/doc/README.omap3 @@ -68,10 +68,6 @@ make make cm_t35_config make -* BlueLYNX-X: - -make omap3_mvblx_config -make Custom commands =============== diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h deleted file mode 100644 index 9e2cf7333c..0000000000 --- a/include/configs/omap3_mvblx.h +++ /dev/null @@ -1,277 +0,0 @@ -/* - * MATRIX VISION GmbH mvBlueLYNX-X - * - * Derived from omap3_beagle.h: - * (C) Copyright 2006-2008 - * Texas Instruments. - * Richard Woodruff - * Syed Mohammed Khasim - * - * Configuration settings for the TI OMAP3530 Beagle board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_MVBLX 1 /* working with mvBlueLYNX-X */ -#define CONFIG_MACH_TYPE MACH_TYPE_MVBLX -#define CONFIG_OMAP_GPIO -#define CONFIG_OMAP_COMMON -/* Common ARM Erratas */ -#define CONFIG_ARM_ERRATA_454179 -#define CONFIG_ARM_ERRATA_430973 -#define CONFIG_ARM_ERRATA_621766 - -#define CONFIG_SDRC /* The chip has SDRC controller */ - -#include /* get chip and board defs */ -#include - -/* - * Display CPU and Board information - */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#define CONFIG_MISC_INIT_R - -#define CONFIG_OF_LIBFDT 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 -#define CONFIG_SERIAL_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (2 << 10) /* 2 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 1 -#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1 -#define CONFIG_SERIAL1 1 /* UART1 */ - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\ - 115200} -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 - -/* silent console by default */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 -#define CONFIG_SILENT_CONSOLE 1 - -/* USB */ -#define CONFIG_USB_MUSB_UDC 1 -#define CONFIG_USB_OMAP3 1 -#define CONFIG_TWL4030_USB 1 - -/* USB device configuration */ -#define CONFIG_USB_DEVICE 1 -#define CONFIG_USB_TTY 1 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 -#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 1 -#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE 1 -#define CONFIG_USBD_VENDORID 0x164c -#define CONFIG_USBD_PRODUCTID_GSERIAL 0x0201 -#define CONFIG_USBD_PRODUCTID_CDCACM 0x0201 -#define CONFIG_USBD_MANUFACTURER "MATRIX VISION GmbH" -#define CONFIG_USBD_PRODUCT_NAME "mvBlueLYNX-X" - -/* no FLASH available */ -#define CONFIG_SYS_NO_FLASH - -/* commands to include */ -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_PING -#define CONFIG_CMD_FPGA_LOADMK - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_OMAP24_I2C_SPEED 100000 -#define CONFIG_SYS_OMAP24_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_OMAP34XX - -/* - * TWL4030 - */ -#define CONFIG_TWL4030_POWER 1 - -/* Environment information */ -#undef CONFIG_ENV_OVERWRITE /* disallow overwriting serial# and ethaddr */ -#define CONFIG_BOOTDELAY 0 -#define CONFIG_ZERO_BOOTDELAY_CHECK - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "silent=true\0" \ - "loadaddr=0x82000000\0" \ - "usbtty=cdc_acm\0" \ - "console=ttyO0,115200n8\0" \ - "mpurate=600\0" \ - "vram=12M\0" \ - "dvimode=1024x768-24@60\0" \ - "defaultdisplay=dvi\0" \ - "loadfpga=if ext2load mmc ${mmcdev}:2 ${loadaddr} "\ - "/lib/firmware/mvblx/${fpgafilename}; then " \ - "fpga load 0 ${loadaddr} ${filesize}; " \ - "fi;\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapfb.debug=y " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype} " \ - "mvfw.fpgavers=${fpgavers} " \ - "${cmdline_suffix}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "mmcbootcmd= " \ - "echo Trying mmc${mmcdev}; " \ - "mmc dev ${mmcdev}; " \ - "if mmc rescan; then " \ - "setenv mmcroot /dev/mmcblk${mmcdev}p2 rw; " \ - "echo SD/MMC found on device ${mmcdev};" \ - "if run loadbootenv; then " \ - "echo Loading boot environment from mmc${mmcdev}; " \ - "run importbootenv; " \ - "fi;" \ - "run loadfpga; " \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...;" \ - "run uenvcmd;" \ - "fi;" \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "fi;" \ - "fi\0" - -#define CONFIG_BOOTCOMMAND \ - "setenv mmcdev 1;" \ - "run mmcbootcmd || " \ - "setenv mmcdev 0;" \ - "run mmcbootcmd" - - -#define CONFIG_AUTO_COMPLETE 1 -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) - -#define CONFIG_SYS_ALT_MEMTEST 1 /* alternative memtest with looping */ -#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END (0x9dffffff) /* end = 448 MB */ -#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */ - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) - -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2) -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -#define CONFIG_ENV_IS_NOWHERE 1 - -/*---------------------------------------------------------------------------- - * Network Subsystem (SMSC9211 Ethernet from SMSC9118 family) - *---------------------------------------------------------------------------- - */ -#if defined(CONFIG_CMD_NET) - #define CONFIG_SMC911X 1 - #define CONFIG_SMC911X_32_BIT - #define CONFIG_SMC911X_BASE 0x2C000000 -#endif /* (CONFIG_CMD_NET) */ - -#define CONFIG_FPGA_COUNT 1 -#define CONFIG_FPGA -#define CONFIG_FPGA_ALTERA -#define CONFIG_FPGA_CYCLON2 -#define CONFIG_SYS_FPGA_PROG_FEEDBACK -#define CONFIG_SYS_FPGA_DONT_USE_CONF_DONE - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 0xA0>>1 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 2^4 = 16-byte pages */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 -#define CONFIG_SYS_EEPROM_SIZE 256 /* Bytes */ -#define CONFIG_ID_EEPROM -#define CONFIG_SYS_EEPROM_BUS_NUM 2 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#define CONFIG_OMAP3_SPI - -#define CONFIG_SYS_CACHELINE_SIZE 64 - -#endif /* __CONFIG_H */