From: Marek Vasut Date: Mon, 27 Jul 2015 20:39:38 +0000 (+0200) Subject: mmc: dw_mmc: Improve handling of data transfer failure X-Git-Tag: v2015.10-rc2~59^2~3 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=9042d974d2391b58d9a51f805756fac31f3c656f;p=u-boot mmc: dw_mmc: Improve handling of data transfer failure In case the data transfer failure happens, instead of returning immediatelly, make sure the DMA is disabled, status register is cleared and the bounce buffer is stopped. Signed-off-by: Marek Vasut Cc: Dinh Nguyen Cc: Pantelis Antoniou Cc: Tom Rini --- diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c index 0f61f163e2..fcd5784899 100644 --- a/drivers/mmc/dw_mmc.c +++ b/drivers/mmc/dw_mmc.c @@ -110,7 +110,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct dwmci_host *host = mmc->priv; ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac, data ? DIV_ROUND_UP(data->blocks, 8) : 0); - int flags = 0, i; + int ret = 0, flags = 0, i; unsigned int timeout = 100000; u32 retry = 10000; u32 mask, ctrl; @@ -218,20 +218,22 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, /* Error during data transfer. */ if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) { printf("%s: DATA ERROR!\n", __func__); - bounce_buffer_stop(&bbstate); - return -1; + ret = -EINVAL; + break; } /* Data arrived correctly. */ - if (mask & DWMCI_INTMSK_DTO) + if (mask & DWMCI_INTMSK_DTO) { + ret = 0; break; + } /* Check for timeout. */ if (get_timer(start) > timeout) { printf("%s: Timeout waiting for data!\n", __func__); - bounce_buffer_stop(&bbstate); - return TIMEOUT; + ret = TIMEOUT; + break; } } @@ -246,7 +248,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, udelay(100); - return 0; + return ret; } static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)