From: Wolfgang Denk <wd@denx.de>
Date: Fri, 8 Jun 2007 08:24:58 +0000 (+0200)
Subject: Fix config problems on SC3 board; make ide_reset_timeout work.
X-Git-Tag: v1.3.0-rc1~57^2~3
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=9045f33c023f698660a2e45d1b2194c0711abebc;p=u-boot

Fix config problems on SC3 board; make ide_reset_timeout work.
---

diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index ce99a41ab7..e308474af7 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -514,11 +514,11 @@ void ide_init (void)
 	unsigned char c;
 	int i, bus;
 #if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3)
-	unsigned int ata_reset_time;
+	unsigned int ata_reset_time = ATA_RESET_TIME;
+	char *s;
 #endif
 #ifdef CONFIG_AMIGAONEG3SE
 	unsigned int max_bus_scan;
-	char *s;
 #endif
 #ifdef CONFIG_IDE_8xx_PCCARD
 	extern int pcmcia_on (void);
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 7134355635..8bf03e1b2f 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -380,7 +380,7 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
 	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
 }
 
-#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SOLIDCARD3))
+#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SC3))
 
 /*
  *As is these functs get called out of flash Not a horrible
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 6b6acfa875..e4357b0885 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -58,7 +58,7 @@
  * 0xFFE00000 .... 0xFFFFFFFF -> BOOT-ROM (2 MiB)
  */
 
-#define CONFIG_SOLIDCARD3	1
+#define CONFIG_SC3	1
 #define CONFIG_4xx	1
 #define CONFIG_405GP	1
 
@@ -134,7 +134,8 @@
 #if 1	/* feel free to disable for development */
 #define CONFIG_AUTOBOOT_KEYED		/* Enable password protection	*/
 #define CONFIG_AUTOBOOT_PROMPT		"\nSC3 - booting... stop with ENTER\n"
-#define CONFIG_AUTOBOOT_DELAY_STR	"\n"	/* 1st "password"	*/
+#define CONFIG_AUTOBOOT_DELAY_STR	"\r"	/* 1st "password"	*/
+#define CONFIG_AUTOBOOT_DELAY_STR2	"\n"	/* 1st "password"	*/
 #endif
 
 /*
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 9e85cdddc4..c4fc5805ab 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -76,7 +76,7 @@
 extern int update_flash_size (int flash_size);
 #endif
 
-#if defined(CONFIG_SOLIDCARD3)
+#if defined(CONFIG_SC3)
 extern void sc3_read_eeprom(void);
 #endif
 
@@ -820,7 +820,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
 #endif	/* CONFIG_405GP, CONFIG_405EP */
 #endif	/* CFG_EXTBDINFO */
 
-#if defined(CONFIG_SOLIDCARD3)
+#if defined(CONFIG_SC3)
 	sc3_read_eeprom();
 #endif
 	s = getenv ("ethaddr");
@@ -929,7 +929,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
     defined(CONFIG_KUP4X)	|| \
     defined(CONFIG_LWMON)	|| \
     defined(CONFIG_PCU_E)	|| \
-    defined(CONFIG_SOLIDCARD3)	|| \
+    defined(CONFIG_SC3)		|| \
     defined(CONFIG_W7O)		|| \
     defined(CONFIG_MISC_INIT_R)
 	/* miscellaneous platform dependent initialisations */