From: Andreas Huber <andreas.huber@keymile.com>
Date: Tue, 25 Jan 2011 10:26:15 +0000 (+0100)
Subject: ppc, mgcoge: add DIP switch detection
X-Git-Tag: v2011.06-rc1~168
X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=91a3c14c;p=u-boot

ppc, mgcoge: add DIP switch detection

This reads the DIP switch on mgcoge. The DIP switch is connected to
the BFTICU (0x40000089) FPGA. If the DIP switch is set the environment
variable 'actual_bank' is set to 0 and starts the SW in bank0.

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
---

diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c
index 5c9496c3ce..5dcdf37384 100644
--- a/board/keymile/mgcoge/mgcoge.c
+++ b/board/keymile/mgcoge/mgcoge.c
@@ -293,6 +293,24 @@ int checkboard(void)
 	return 0;
 }
 
+#define DIPSWITCH_OFFSET 0x89
+#define DIPSWITCH_MASK   0x0f
+
+int last_stage_init(void)
+{
+	u8 dip_switch;
+	/* Dip switch */
+	dip_switch = readb(CONFIG_SYS_BFTICU_BASE + DIPSWITCH_OFFSET);
+	dip_switch &= DIPSWITCH_MASK;
+	/* dip switch 'full reset' or 'db erase' */
+	if (dip_switch & 0x1 || dip_switch & 0x2) {
+		/* start bootloader */
+		puts("DIP:   Enabled\n");
+		setenv("actual_bank", "0");
+	}
+	return 0;
+}
+
 /*
  * Early board initalization.
  */
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index 6dec0ee740..f1bd32a31e 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -348,4 +348,9 @@
 #define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc/cpm/serial@11a90"
 
+/* enable last_stage_init */
+#define CONFIG_LAST_STAGE_INIT          1
+/* bfticu address */
+#define CONFIG_SYS_BFTICU_BASE          0x40000000
+
 #endif /* __CONFIG_H */