From: Kishon Vijay Abraham I Date: Wed, 12 Jul 2017 09:42:46 +0000 (+0200) Subject: regulator: palmas: Add support for LDO1 regulator to provide 1.8V X-Git-Tag: v2017.09-rc2~136^2~1 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=9554a14df2e2f1eee8cbecbaa021aaaae9f457ad;p=u-boot regulator: palmas: Add support for LDO1 regulator to provide 1.8V Modify palmas_mmc1_poweron_ldo() API to set the voltage based on the voltage parameter passed as argument instead of always setting it to 3.0V. This allows MMC1 to set the LDO1 regulator voltage to 3.3V or 1.8V. 1.8V is required to add support for UHS mode. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Tom Rini --- diff --git a/drivers/power/palmas.c b/drivers/power/palmas.c index c813b21e6f..4e9895987c 100644 --- a/drivers/power/palmas.c +++ b/drivers/power/palmas.c @@ -50,10 +50,9 @@ int palmas_mmc1_poweron_ldo(uint voltage) int ret; /* * Currently valid for the dra7xx_evm board: - * Set TPS659038 LDO1 to 3.0 V + * Set TPS659038 LDO1 to 3.0 V or 1.8V */ - val = LDO_VOLT_3V0; - ret = palmas_i2c_write_u8(TPS65903X_CHIP_P1, LDO1_VOLTAGE, val); + ret = palmas_i2c_write_u8(TPS65903X_CHIP_P1, LDO1_VOLTAGE, voltage); if (ret) { printf("tps65903x: could not set LDO1 voltage.\n"); return ret;