From: Marek Vasut Date: Sun, 8 Apr 2012 17:34:46 +0000 (+0000) Subject: DMA: Split the APBH DMA init into block and channel init X-Git-Tag: v2012.04-rc2~1^2~6 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=96666a39aed47c8c643dc7c6a6e15e314e63f42b;p=u-boot DMA: Split the APBH DMA init into block and channel init This fixes the issue where mxs_dma_init() was called either twice or never, without introducing any new init hooks. The idea is to allow each and every device using the APBH DMA block to configure and request only the channels it uses, instead of making it call init for all the channels as is now. The common DMA block init part, which only configures the block, is then called from CPUs arch_cpu_init() call. NOTE: This patch depends on: http://patchwork.ozlabs.org/patch/150957/ Signed-off-by: Marek Vasut Cc: Stefano Babic Cc: Wolfgang Denk Cc: Detlev Zundel Cc: Fabio Estevam Tested-by: Fabio Estevam --- diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c index cf6d4e9bd4..dc0338dfb5 100644 --- a/arch/arm/cpu/arm926ejs/mx28/mx28.c +++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -172,6 +173,11 @@ int arch_cpu_init(void) */ mxs_gpio_init(); +#ifdef CONFIG_APBH_DMA + /* Start APBH DMA */ + mxs_dma_init(); +#endif + return 0; } #endif diff --git a/arch/arm/include/asm/arch-mx28/dma.h b/arch/arm/include/asm/arch-mx28/dma.h index 52747e2fbf..4a1820bdee 100644 --- a/arch/arm/include/asm/arch-mx28/dma.h +++ b/arch/arm/include/asm/arch-mx28/dma.h @@ -140,6 +140,8 @@ void mxs_dma_desc_free(struct mxs_dma_desc *); int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc); int mxs_dma_go(int chan); -int mxs_dma_init(void); +void mxs_dma_init(void); +int mxs_dma_init_channel(int chan); +int mxs_dma_release(int chan); #endif /* __DMA_H__ */ diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c index c086629b0a..cb2193ec55 100644 --- a/drivers/dma/apbh_dma.c +++ b/drivers/dma/apbh_dma.c @@ -316,7 +316,7 @@ static int mxs_dma_request(int channel) * The channel will NOT be released if it's marked "busy" (see * mxs_dma_enable()). */ -static int mxs_dma_release(int channel) +int mxs_dma_release(int channel) { struct mxs_dma_chan *pchan; int ret; @@ -552,12 +552,10 @@ int mxs_dma_go(int chan) /* * Initialize the DMA hardware */ -int mxs_dma_init(void) +void mxs_dma_init(void) { struct mx28_apbh_regs *apbh_regs = (struct mx28_apbh_regs *)MXS_APBH_BASE; - struct mxs_dma_chan *pchan; - int ret, channel; mx28_reset_block(&apbh_regs->hw_apbh_ctrl0_reg); @@ -576,28 +574,26 @@ int mxs_dma_init(void) writel(APBH_CTRL0_APB_BURST_EN, &apbh_regs->hw_apbh_ctrl0_clr); #endif +} - for (channel = 0; channel < MXS_MAX_DMA_CHANNELS; channel++) { - pchan = mxs_dma_channels + channel; - pchan->flags = MXS_DMA_FLAGS_VALID; - - ret = mxs_dma_request(channel); +int mxs_dma_init_channel(int channel) +{ + struct mxs_dma_chan *pchan; + int ret; - if (ret) { - printf("MXS DMA: Can't acquire DMA channel %i\n", - channel); + pchan = mxs_dma_channels + channel; + pchan->flags = MXS_DMA_FLAGS_VALID; - goto err; - } + ret = mxs_dma_request(channel); - mxs_dma_reset(channel); - mxs_dma_ack_irq(channel); + if (ret) { + printf("MXS DMA: Can't acquire DMA channel %i\n", + channel); + return ret; } - return 0; + mxs_dma_reset(channel); + mxs_dma_ack_irq(channel); -err: - while (--channel >= 0) - mxs_dma_release(channel); - return ret; + return 0; } diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c index dfceaef953..35c6bdabb0 100644 --- a/drivers/mmc/mxsmmc.c +++ b/drivers/mmc/mxsmmc.c @@ -338,6 +338,7 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)) (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; struct mmc *mmc = NULL; struct mxsmmc_priv *priv = NULL; + int ret; mmc = malloc(sizeof(struct mmc)); if (!mmc) @@ -356,6 +357,10 @@ int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int)) return -ENOMEM; } + ret = mxs_dma_init_channel(id); + if (ret) + return ret; + priv->mmc_is_wp = wp; priv->id = id; switch (id) { diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 4b1297a2fd..9c95811054 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -1058,7 +1058,7 @@ int mxs_nand_init(struct mxs_nand_info *info) { struct mx28_gpmi_regs *gpmi_regs = (struct mx28_gpmi_regs *)MXS_GPMI_BASE; - int i = 0; + int i = 0, j; info->desc = malloc(sizeof(struct mxs_dma_desc *) * MXS_NAND_DMA_DESCRIPTOR_COUNT); @@ -1073,7 +1073,11 @@ int mxs_nand_init(struct mxs_nand_info *info) } /* Init the DMA controller. */ - mxs_dma_init(); + for (j = MXS_DMA_CHANNEL_AHB_APBH_GPMI0; + j <= MXS_DMA_CHANNEL_AHB_APBH_GPMI7; j++) { + if (mxs_dma_init_channel(j)) + goto err3; + } /* Reset the GPMI block. */ mx28_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg); @@ -1089,6 +1093,9 @@ int mxs_nand_init(struct mxs_nand_info *info) return 0; +err3: + for (--j; j >= 0; j--) + mxs_dma_release(j); err2: free(info->desc); err1: