From: Tim Harvey Date: Fri, 15 Jul 2016 14:16:28 +0000 (-0700) Subject: imx: ventana: refactor board-specific dt fixups (no functional change) X-Git-Tag: v2016.09-rc2~174^2~15 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=966fe02ee64106721c7301641e86e5784a5f47b2;p=u-boot imx: ventana: refactor board-specific dt fixups (no functional change) Re-factor the board-specific dt fixups so that they are easier to follow and extend in the future: - use defines for DT paths - use switch/case per board - order models numerically There is no functional change in the code Signed-off-by: Tim Harvey --- diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 588ea85b9d..bb792c2028 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -1083,6 +1083,9 @@ void ft_board_pci_fixup(void *blob, bd_t *bd) * - board (full model from EEPROM) * - peripherals removed from DTB if not loaded on board (per EEPROM config) */ +#define UART1_PATH "/soc/aips-bus@02100000/serial@021ec000" +#define WDOG1_PATH "/soc/aips-bus@02000000/wdog@020bc000" +#define GPIO3_PATH "/soc/aips-bus@02000000/gpio@020a4000" int ft_board_setup(void *blob, bd_t *bd) { struct ventana_board_info *info = &ventana_info; @@ -1136,90 +1139,107 @@ int ft_board_setup(void *blob, bd_t *bd) ft_sethdmiinfmt(blob, getenv("hdmiinfmt")); /* - * disable serial2 node for GW54xx for compatibility with older - * 3.10.x kernel that improperly had this node enabled in the DT + * Board model specific fixups */ - if (board_type == GW54xx) { - i = fdt_path_offset(blob, - "/soc/aips-bus@02100000/serial@021ec000"); - if (i) - fdt_del_node(blob, i); - } - - /* - * disable wdog1/wdog2 nodes for GW51xx below revC to work around - * errata causing wdog timer to be unreliable. - */ - if (board_type == GW51xx && rev >= 'A' && rev < 'C') { - i = fdt_path_offset(blob, - "/soc/aips-bus@02000000/wdog@020bc000"); - if (i) - fdt_status_disabled(blob, i); - } - - /* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */ - else if (board_type == GW52xx && info->model[4] == '2') { - u32 handle = 0; - u32 *range = NULL; + switch (board_type) { + case GW51xx: + /* + * disable wdog node for GW51xx-A/B to work around + * errata causing wdog timer to be unreliable. + */ + if (rev >= 'A' && rev < 'C') { + i = fdt_path_offset(blob, WDOG1_PATH); + if (i) + fdt_status_disabled(blob, i); + } + break; - i = fdt_node_offset_by_compatible(blob, -1, "fsl,imx6q-pcie"); - if (i) - range = (u32 *)fdt_getprop(blob, i, "reset-gpio", - NULL); + case GW52xx: + /* GW522x Uses GPIO3_IO23 instead of GPIO1_IO29 */ + if (info->model[4] == '2') { + u32 handle = 0; + u32 *range = NULL; - if (range) { - i = fdt_path_offset(blob, - "/soc/aips-bus@02000000/gpio@020a4000"); + i = fdt_node_offset_by_compatible(blob, -1, + "fsl,imx6q-pcie"); if (i) - handle = fdt_get_phandle(blob, i); - if (handle) { - range[0] = cpu_to_fdt32(handle); - range[1] = cpu_to_fdt32(23); + range = (u32 *)fdt_getprop(blob, i, + "reset-gpio", NULL); + + if (range) { + i = fdt_path_offset(blob, GPIO3_PATH); + if (i) + handle = fdt_get_phandle(blob, i); + if (handle) { + range[0] = cpu_to_fdt32(handle); + range[1] = cpu_to_fdt32(23); + } } - } - /* these have broken usd_vsel */ - if (strstr((const char *)info->model, "SP318-B") || - strstr((const char *)info->model, "SP331-B")) - gpio_cfg[board_type].usd_vsel = 0; - } + /* these have broken usd_vsel */ + if (strstr((const char *)info->model, "SP318-B") || + strstr((const char *)info->model, "SP331-B")) + gpio_cfg[board_type].usd_vsel = 0; + } + break; - /* - * isolate CSI0_DATA_EN for GW551x below revB to work around - * errata causing non functional digital video in (it is not hooked up) - */ - else if (board_type == GW551x && rev == 'A') { - u32 *range = NULL; - int len; - const u32 *handle = NULL; + case GW53xx: + break; - i = fdt_node_offset_by_compatible(blob, -1, - "fsl,imx-tda1997x-video"); - if (i) - handle = fdt_getprop(blob, i, "pinctrl-0", NULL); - if (handle) - i = fdt_node_offset_by_phandle(blob, - fdt32_to_cpu(*handle)); + case GW54xx: + /* + * disable serial2 node for GW54xx for compatibility with older + * 3.10.x kernel that improperly had this node enabled in the DT + */ + i = fdt_path_offset(blob, UART1_PATH); if (i) - range = (u32 *)fdt_getprop(blob, i, "fsl,pins", &len); - if (range) { - len /= sizeof(u32); - for (i = 0; i < len; i += 6) { - u32 mux_reg = fdt32_to_cpu(range[i+0]); - u32 conf_reg = fdt32_to_cpu(range[i+1]); - /* mux PAD_CSI0_DATA_EN to GPIO */ - if (is_cpu_type(MXC_CPU_MX6Q) && - mux_reg == 0x260 && conf_reg == 0x630) - range[i+3] = cpu_to_fdt32(0x5); - else if (!is_cpu_type(MXC_CPU_MX6Q) && - mux_reg == 0x08c && conf_reg == 0x3a0) - range[i+3] = cpu_to_fdt32(0x5); + fdt_del_node(blob, i); + break; + + case GW551x: + /* + * isolate CSI0_DATA_EN for GW551x-A to work around errata + * causing non functional digital video in (it is not hooked up) + */ + if (rev == 'A') { + u32 *range = NULL; + int len; + const u32 *handle = NULL; + + i = fdt_node_offset_by_compatible(blob, -1, + "fsl,imx-tda1997x-video"); + if (i) + handle = fdt_getprop(blob, i, "pinctrl-0", + NULL); + if (handle) + i = fdt_node_offset_by_phandle(blob, + fdt32_to_cpu(*handle)); + if (i) + range = (u32 *)fdt_getprop(blob, i, "fsl,pins", + &len); + if (range) { + len /= sizeof(u32); + for (i = 0; i < len; i += 6) { + u32 mux_reg = fdt32_to_cpu(range[i+0]); + u32 conf_reg = fdt32_to_cpu(range[i+1]); + /* mux PAD_CSI0_DATA_EN to GPIO */ + if (is_cpu_type(MXC_CPU_MX6Q) && + mux_reg == 0x260 && + conf_reg == 0x630) + range[i+3] = cpu_to_fdt32(0x5); + else if (!is_cpu_type(MXC_CPU_MX6Q) && + mux_reg == 0x08c && + conf_reg == 0x3a0) + range[i+3] = cpu_to_fdt32(0x5); + } + fdt_setprop_inplace(blob, i, "fsl,pins", range, + len); } - fdt_setprop_inplace(blob, i, "fsl,pins", range, len); - } - /* set BT656 video format */ - ft_sethdmiinfmt(blob, "yuv422bt656"); + /* set BT656 video format */ + ft_sethdmiinfmt(blob, "yuv422bt656"); + } + break; } /* Configure DIO */