From: Jerry Huang Date: Thu, 17 May 2012 23:57:02 +0000 (+0000) Subject: FSL/eSDHC: enable the clock to detect the SD card X-Git-Tag: v2012.07-rc2~10^2~4 X-Git-Url: https://git.sur5r.net/?a=commitdiff_plain;h=975324a7d9abd26423594b596d8cd7b83699171a;p=u-boot FSL/eSDHC: enable the clock to detect the SD card For FSL low-end processors (VVN2.2), in order to detect the SD card, we should enable PEREN, HCKEN and IPGEN to enable the clock. Otherwise, after booting the u-boot, and then inserting the SD card, the SD card can't be detected. For SDHC VVN2.3 IP, these bits are reserved, and SDCLKEN is used. And when accessing to these reserved bit, no any impact happened. Signed-off-by: Jerry Huang CC: Andy Fleming CC: Marek Vasut Signed-off-by: Andy Fleming --- diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 105ffb18e2..b6c969d2c8 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -543,6 +543,9 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) /* First reset the eSDHC controller */ esdhc_reset(regs); + esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN + | SYSCTL_IPGEN | SYSCTL_CKEN); + mmc->priv = cfg; mmc->send_cmd = esdhc_send_cmd; mmc->set_ios = esdhc_set_ios;